Rollei Action Camera 1080P with 2-inch Screen - Model 40297 User Manual

Introduction

This manual provides detailed instructions for the operation and maintenance of your Rollei Action Camera 1080P, Model 40297. Please read this manual thoroughly before using the camera to ensure proper function and to maximize your experience. Keep this manual for future reference.

Product Features

• 140° Super Wide Angle Lens: Capture expansive views with a broad field of vision.
• Loop Function: Record video continuously, overwriting the oldest files when the memory card is full.
• Multiple Photo Modes: Includes Burst photo, Time Lapse, and Snow mode for diverse shooting scenarios.
• Integrated WiFi: Connect wirelessly to your device with a range of up to 20 meters for remote control and file transfer.
• Underwater Protective Case: Enables use in water depths up to 40 meters.
• 900 mAh Lithium-Ion Battery: Provides a battery run time of up to 90 minutes.
• 2-inch Screen: For easy framing and playback.
• Video Resolution: 1080P for clear video recording.
• Still Image Resolution: 5 Megapixels.

Package Contents

Verify that all items are present in your package:

• Rollei Action Camera 1080P (Model 40297)
• Underwater Protective Case
• 900 mAh Lithium-Ion Battery
• Mounting accessories (specific types may vary)
• USB Charging Cable
• User Manual (this document)

Setup

1. Charging the Battery

1. Insert the 900 mAh lithium-ion battery into the camera's battery compartment.
2. Connect the camera to a power source using the provided USB cable. The charging indicator light will illuminate.
3. Allow the battery to charge fully before first use. The indicator light will change or turn off when charging is complete.

2. Inserting a Memory Card

This camera supports memory cards (not included). Ensure the card is formatted correctly before use.

1. Open the memory card slot cover.
2. Insert a compatible memory card (e.g., microSD) with the contacts facing the correct direction until it clicks into place.
3. Close the memory card slot cover securely.

3. Attaching the Waterproof Case

For underwater use or protection against impacts, place the camera inside the waterproof case.

1. Open the latch on the waterproof case.
2. Carefully place the camera inside the case, ensuring it fits snugly.
3. Close the latch firmly to seal the case. Before submerging, always perform a leak test without the camera inside.

Image: Rollei Action Camera 1080P in its waterproof housing, ready for use.

Operating Instructions

1. Power On/Off

• To Power On: Press and hold the Power/Mode button (usually on the front or top) for a few seconds until the screen illuminates.
• To Power Off: Press and hold the Power/Mode button again until the screen turns off.

2. Basic Recording

• Switch Modes: Press the Power/Mode button repeatedly to cycle through video, photo, and playback modes.
• Start Recording/Capture Photo: In video mode, press the Shutter/OK button (usually on top) to start recording. Press again to stop. In photo mode, press the Shutter/OK button to capture a still image.

3. Advanced Modes

• Burst Photo: In photo mode, navigate to settings and select 'Burst' to capture multiple photos in quick succession with a single press of the Shutter/OK button.
• Time Lapse: In video or photo mode, access settings to enable 'Time Lapse'. Set the desired interval between shots. The camera will automatically compile these into a video or a series of photos.
• Snow Mode: This mode adjusts exposure settings for optimal performance in bright, snowy environments, preventing overexposure. Activate it through the camera's settings menu.
• Loop Function: When enabled in video settings, the camera will record continuously. Once the memory card is full, the oldest files will be overwritten by new recordings.

4. WiFi Connection

The integrated WiFi allows remote control and file management via a smartphone application.

1. Download the official Rollei Action Camera app on your smartphone.
2. On the camera, activate WiFi through the settings menu. The camera's WiFi network name (SSID) and password will be displayed on the screen.
3. On your smartphone, go to WiFi settings and connect to the camera's network using the provided password.
4. Open the Rollei app to control the camera, view live footage, and transfer files.

Maintenance

• Cleaning the Lens: Use a soft, lint-free cloth specifically designed for camera lenses. Avoid abrasive materials.
• Cleaning the Camera Body: Wipe the camera body with a soft, damp cloth. Do not use strong detergents or solvents.
• Waterproof Case Care: After each use in saltwater, rinse the waterproof case with fresh water and allow it to air dry. Inspect the O-ring seal for any debris or damage regularly.
• Battery Care: Store the battery in a cool, dry place. Do not expose it to extreme temperatures. Charge the battery periodically if not used for extended periods.
• Firmware Updates: Check the official Rollei website for any available firmware updates to ensure optimal performance and new features.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official Rollei website or contact their customer service. Keep your proof of purchase for warranty claims.

• Online Support: Visit the official Rollei website for FAQs, driver downloads, and support contact information.
• Customer Service: Contact Rollei customer service for assistance with product issues or warranty inquiries.