Utilitech DLS30-06N27D1E-WH-6

Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight User Manual

Product Overview

This manual provides instructions for the Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight. This product is designed to replace existing recessed lighting fixtures, offering energy-efficient LED illumination. Each pack contains six dimmable downlights, providing a soft white light suitable for various indoor applications.

Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight 6-pack

Image: Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight, shown as a 6-pack.

Key Features:

  • Designed for 5-inch or 6-inch new construction and remodel housings.
  • Integrated LED technology: 10.5-watt (65-watt equivalent), 650 lumens, 2700K soft white light.
  • Long lifespan of approximately 35,000 hours.
  • Energy Star certified for energy efficiency.
  • Includes a medium-based screw-in adapter for easy connection.
  • Equipped with friction clips and spring clips for versatile installation.

Setup and Installation

Safety Information: Before beginning installation, ensure the power to the fixture location is turned off at the circuit breaker. Consult a qualified electrician if you are unfamiliar with electrical wiring.

  1. Prepare the Existing Housing: Ensure your existing recessed housing is compatible with 5-inch or 6-inch retrofit downlights. Remove any existing bulb and trim from the housing.
  2. Connect the Adapter: Screw the medium-based screw-in adapter from the LED downlight into the existing socket of your recessed housing.
  3. Secure the Downlight: Gently push the LED downlight into the recessed housing. The friction clips or spring clips (depending on your housing type) will secure the fixture in place. Ensure the downlight sits flush with the ceiling.
  4. Restore Power: Once the downlight is securely installed, restore power at the circuit breaker.
  5. Test Functionality: Turn on the light switch to verify proper operation.

Operating Instructions

The Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight operates like a standard light fixture once installed. It is designed to be dimmable, allowing you to adjust light output when connected to a compatible dimmer switch.

  • Turning On/Off: Use your existing wall switch to turn the downlight on or off.
  • Dimming: If connected to a compatible dimmer switch, adjust the dimmer control to achieve your desired brightness level. Ensure the dimmer switch is rated for LED lighting to prevent flickering or damage.

Maintenance

The Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight requires minimal maintenance due to its integrated LED design.

  • Cleaning: To clean the fixture, ensure the power is off. Use a soft, dry, or slightly damp cloth. Avoid abrasive cleaners, solvents, or cleaning agents containing alcohol, as these can damage the finish or electrical components.
  • LED Replacement: The LED light source is integrated into the fixture and is not user-replaceable. The fixture is designed for a long operational life of approximately 35,000 hours.

Troubleshooting

If you encounter issues with your downlight, refer to the following common troubleshooting steps:

  • Light Does Not Turn On:
    • Check if the power switch is in the ON position.
    • Verify that the circuit breaker for the fixture is not tripped.
    • Ensure the medium-based screw-in adapter is securely tightened into the housing socket.
    • Confirm that the downlight is properly seated and making electrical contact within the housing.
  • Light Flickers or Dims Incorrectly:
    • Ensure you are using an LED-compatible dimmer switch. Older incandescent-only dimmers may cause flickering or improper dimming.
    • Check for loose connections at the dimmer switch or the fixture.
  • Light is Not Bright Enough:
    • If using a dimmer, ensure it is set to the maximum brightness level.
    • Verify that the fixture is receiving full 110V power.

If these steps do not resolve the issue, contact customer support for further assistance.

Specifications

Model NumberDLS30-06N27D1E-WH-6
BrandUtilitech
Light Source TypeIntegrated LED
Wattage (Equivalent)65 Watts
Actual Wattage10.5 Watts
Brightness650 Lumens
Color Temperature2700 Kelvin (Soft White)
DimmableYes (with compatible dimmer switch)
Lifespan35,000 Hours
Voltage110 Volts
Installation TypeRetrofit (for 5-inch or 6-inch housings)
Included ComponentsMounting Hardware, Medium-based screw-in adapter
MaterialMetal, Plastic (Shade)
ColorWhite
Indoor/Outdoor UsageIndoor
Product Dimensions (Pack)5 x 7 x 5 inches
Item Weight (Pack)3.5 Pounds

Warranty Information

Specific warranty details for the Utilitech DLS30-06N27D1E-WH-6 LED Recessed Retrofit Downlight are typically provided with the product packaging or can be obtained from the manufacturer's official website. Please retain your proof of purchase for any warranty claims.

Customer Support

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Utilitech product, please refer to the contact information provided on the product packaging or visit the official Utilitech website for customer support resources.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.