Introduction
This manual provides comprehensive instructions for the assembly, installation, and care of your Relaxdays White Vanity Unit with 2 Compartments. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image: Close-up of the vanity unit's top surface and design details.
Safety Information
Observe the following safety precautions during assembly and use:
- Ensure all parts are present and undamaged before assembly.
- Assemble on a soft, clean surface to prevent scratches and damage to the unit.
- Do not overtighten screws, as this can strip threads or crack materials.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- The maximum load capacity for this unit is approximately 30 kg. Do not exceed this weight to prevent structural damage or injury.
- This unit is designed for indoor use in a bathroom environment. Avoid exposure to extreme temperatures or direct sunlight.
Package Contents
Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.
- Vanity Unit components (MDF panels, bamboo elements for doors and legs)
- Mounting hardware (screws, dowels, hinges, shelf supports)
- Assembly instructions (this document)
Setup and Assembly Instructions
Follow these steps carefully to assemble your vanity unit. It is recommended to have two people for assembly.
Step 1: Unpack and Identify Parts
Carefully unpack all components and lay them out on a clean, soft surface. Identify each part using the provided hardware list and diagrams (if any were included in the physical package).
Image: External dimensions of the vanity unit, showing height, width, and depth measurements.
Step 2: Assemble the Frame
Connect the side panels to the base and top panels using the provided screws and dowels. Ensure all connections are secure but do not overtighten.
Step 3: Install the Back Panel
Slide or attach the back panel into the designated grooves or using small nails/screws. Ensure the siphon cut-out aligns correctly with the intended sink placement.
Step 4: Install the Shelf
The vanity unit features a height-adjustable shelf. Insert the shelf supports into the desired holes on the side panels. Place the shelf onto the supports. The shelf can be removed or adjusted later as needed.
Image: Interior view showing the adjustable shelf and siphon cut-out, highlighting flexibility.
Image: Interior dimensions of the vanity unit, showing compartment height, width, and depth.
Step 5: Attach the Doors
Attach the hinges to the doors and then to the side panels of the unit. Adjust the screws on the hinges to ensure the doors close properly and are aligned.
Image: Close-up of the bamboo elements and legs, illustrating the design details.
Step 6: Position the Unit
Carefully move the assembled vanity unit into its desired position under the sink. Ensure the siphon fits through the cut-out without obstruction.
Image: The vanity unit integrated into a bathroom environment.
Usage Instructions
The Relaxdays White Vanity Unit is designed to provide convenient storage in your bathroom. Utilize the two compartments for organizing towels, cleaning products, toilet paper, and other bathroom essentials.
- Storage: Open the double doors to access the interior. The adjustable shelf allows for flexible storage configurations to accommodate items of various heights.
- Siphon Cut-out: The integrated siphon cut-out ensures the unit fits seamlessly under most standard sinks, maximizing otherwise unused space.
Maintenance and Care
To ensure the longevity and appearance of your vanity unit, follow these care guidelines:
- Cleaning: Wipe the surfaces with a dry, soft cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and bamboo elements.
- Moisture Protection: While designed for bathroom use, avoid prolonged exposure to excessive moisture. Wipe up spills immediately.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Doors do not align or close properly. | Hinges are not adjusted correctly or are loose. | Adjust the screws on the hinges to align the doors. Ensure hinges are securely fastened. |
| Unit wobbles after assembly. | Screws are not fully tightened or unit is on an uneven surface. | Ensure all assembly screws are tightened. If the floor is uneven, use furniture pads or shims under the legs to stabilize. |
| Siphon does not fit through the cut-out. | Sink or siphon dimensions are not standard or unit is not positioned correctly. | Verify the dimensions of your sink's siphon against the unit's cut-out (approx. 8 x 16.5 cm). Adjust the unit's position. |
Specifications
| Model: | Vanity Unit 60.5x60x30.5cm |
| Brand: | Relaxdays |
| Dimensions (H x W x D): | Approx. 60.5 x 60 x 30.5 cm |
| Siphon Cut-out (W x D): | Approx. 8 x 16.5 cm |
| Weight: | Approx. 11 kg (20.94 Pounds) |
| Max. Load Capacity: | Approx. 30 kg |
| Material: | MDF (Engineered Wood), Bamboo |
| Color: | White, Natural (Bamboo) |
| Number of Compartments: | 2 (with 1 adjustable shelf) |
| Assembly Required: | Yes |
| Care Instructions: | Wipe with Dry Cloth |
Warranty and Support
For warranty information or technical support, please refer to the retailer's policy or contact Relaxdays customer service directly. Keep your purchase receipt as proof of purchase.
Contact Information: Please visit the official Relaxdays website for the most up-to-date contact details.
