Climma Marine Air Conditioner B 220 V 12000 Btu/h User Manual
Model: 50.241.12
1. Important Safety Information
Please read all instructions carefully before installing or operating the unit. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- Ensure the power supply matches the unit's specifications (220V).
- All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes.
- Do not operate the unit with damaged power cords or plugs.
- Keep hands and objects clear of moving parts and air vents.
- Do not block air intake or exhaust vents.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Product Overview
The Climma Marine Air Conditioner is designed to provide efficient cooling and dehumidification for marine environments. Its compact design allows for flexible installation.
2.1 Components
- Main Unit (Compressor, Evaporator, Condenser)
- Control Panel (Integrated or Remote)
- Drainage Hose Connection
- Air Intake/Exhaust Connections
2.2 Features
- Cooling Capacity: 12000 Btu/h
- Voltage: 220 Volts
- Special Feature: Dehumidifier
- Control Method: Remote
An image showing the compact design of the Climma marine air conditioner unit, highlighting its main components including the compressor, heat exchanger coils, and integrated control panel.
3. Installation and Setup
3.1 Unpacking
Carefully remove the unit from its packaging. Inspect for any shipping damage. Retain packaging for future transport or storage.
3.2 Mounting Considerations
Select a stable, level location that can support the unit's weight. Ensure adequate clearance around the unit for proper airflow and maintenance access. Consider the routing of air ducts and drainage lines.
3.3 Electrical Connection
Connect the unit to a dedicated 220V power supply circuit. Ensure the circuit is protected by an appropriately sized circuit breaker. Consult a qualified electrician for all electrical wiring.
3.4 Drainage and Ducting
Connect the drainage hose to the unit's condensate drain outlet and route it to a suitable discharge point, ensuring a continuous downward slope for gravity drainage. Install air intake and exhaust ducts according to the system design, ensuring airtight connections.
4. Operating Instructions
4.1 Control Panel Overview
The unit features an integrated control panel and can also be operated via a remote control. Common controls include Power On/Off, Mode Selection, Temperature Adjustment, and Fan Speed.
4.2 Basic Operation
- Power On/Off: Press the Power button on the control panel or remote to turn the unit on or off.
- Mode Selection: Use the Mode button to cycle through available modes: Cooling, Dehumidify.
- Temperature Adjustment: Use the Up/Down arrows to set the desired temperature in Cooling mode.
- Fan Speed: Adjust fan speed (Low, Medium, High) as needed for comfort and noise level.
4.3 Remote Control
Point the remote control directly at the unit's receiver. Ensure there are no obstructions between the remote and the unit. Replace batteries when the remote's range decreases.
5. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your air conditioner.
5.1 Regular Cleaning
- Air Filters: Clean or replace air filters every 2-4 weeks, or more frequently in dusty environments. Dirty filters reduce efficiency and airflow.
- Coils: Periodically inspect and clean the evaporator and condenser coils. Use a soft brush or vacuum cleaner to remove dust and debris.
- Drain Pan and Line: Check the condensate drain pan and line for blockages or algae growth. Clean as necessary to prevent overflow.
5.2 Seasonal Maintenance
Before and after the cooling season, perform a thorough inspection. Check all electrical connections for tightness and signs of corrosion. Ensure all components are securely mounted.
6. Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power supply; Circuit breaker tripped; Remote control batteries dead | Check power connection; Reset circuit breaker; Replace remote batteries |
| Unit not cooling effectively | Dirty air filter; Blocked air vents; Low refrigerant; Incorrect mode setting | Clean/replace filter; Clear vents; Contact service for refrigerant check; Select Cooling mode |
| Water leaking from unit | Blocked drain line; Unit not level | Clear drain line; Ensure unit is level |
| Unusual noise | Loose parts; Fan obstruction | Check for loose components; Remove any obstructions from fan |
7. Technical Specifications
| Specification | Value |
|---|---|
| Brand | Osculati |
| Model Number | 50.241.12 |
| Cooling Capacity | 12000 British Thermal Units (Btu/h) |
| Voltage | 220 Volts |
| Special Feature | Dehumidifier |
| Material Type | Metal |
| Control Method | Remote |
| Power Source | Corded Electric |
8. Warranty and Customer Support
This product comes with a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Osculati customer support through their official website or authorized service centers.
Keep your purchase receipt and model number (50.241.12) readily available when contacting support.
