CAMRY Digital Bathroom Scale EB9861H User Manual

1. Introduction

Thank you for choosing the CAMRY Digital Bathroom Scale, Model EB9861H. This scale is designed to provide accurate body weight measurements and calculate Body Mass Index (BMI). Featuring an extra-large platform of 33.5 x 31 cm, 6mm tempered glass, and a large LCD display, it offers a safe, stable, and user-friendly experience. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new scale.

Figure 1: CAMRY Digital Bathroom Scale highlighting its multi-function capabilities including BMI, body weight, precise sensors, 180kg/400lb capacity, auto on/off/calibrate, and error indication.

Figure 2: The scale features four high-precision sensors for accurate and stable readings, with a maximum weighing capacity of 180 kg (400 lb).

2. Safety Information

• Always place the scale on a hard, flat surface. Using it on soft surfaces like carpet may affect accuracy.
• The scale surface is made of glass. Keep it dry to prevent slipping.
• Do not jump on the scale or drop heavy objects on it, as this may damage the glass platform.
• Do not immerse the scale in water or use abrasive cleaning agents.
• This scale is for personal use only and not intended for medical diagnosis or treatment.
• Keep batteries out of reach of children. Dispose of used batteries properly.

3. Product Overview

The CAMRY EB9861H Digital Bathroom Scale features a sleek design with essential components for accurate and easy weighing.

Figure 3: Key components of the scale include the 6mm tempered glass platform, rounded corners, large buttons for settings, a large 3.6-inch LCD screen, and a streamline edge design.

Figure 4: The large LCD backlight display ensures easy readability of weight and BMI values in various lighting conditions.

• Tempered Glass Platform: 6mm thick for durability and safety.
• LCD Display: Large 74 x 46 mm screen with white backlight for clear readings.
• Control Buttons: Three buttons (SET, Up, Down) located on the side for unit conversion and user profile settings.
• Sensors: Four high-precision sensors for accurate measurements.

4. Setup

4.1 Battery Installation

1. Open the battery compartment cover on the underside of the scale.
2. Insert 2 AAA batteries, ensuring correct polarity (+/-).
3. Close the battery compartment cover.

4.2 Initial Placement

Place the scale on a hard, flat, and stable surface. Avoid carpets or uneven flooring to ensure accurate readings.

4.3 Unit Conversion

To change the weight unit (kilograms, pounds, or stones):

• Locate the unit button (often labeled "UNIT" or "MODE") on the underside or side of the scale.
• Press the button to cycle through the available units (kg, lb, st). The selected unit will be displayed on the LCD screen.

5. Operation

5.1 Basic Weight Measurement

1. Ensure the scale is on a hard, flat surface.
2. Step onto the scale with bare feet. The scale will automatically turn on.
3. Stand still until your weight is displayed and stabilizes. The reading will flash a few times before locking.
4. Step off the scale. It will automatically turn off after a few seconds.

5.2 BMI Measurement (Body Mass Index)

To obtain your BMI, you must first set your height. The scale can store up to 12 user profiles.

Figure 5: The scale displays both body weight and Body Mass Index (BMI) immediately after stepping on it, provided user height is set.

Setting User Profiles and Height:

1. Press the "SET" button to enter user profile settings.
2. Use the "Up" or "Down" buttons to select a user profile (P-01 to P-12).
3. Press "SET" again to confirm the user.
4. The height setting will flash. Use "Up" or "Down" to adjust your height.
5. Press "SET" to save your height. The scale will then return to weighing mode.

Figure 6: The scale supports up to 12 user profiles (P-01 to P-12), allowing multiple users to store their height data for BMI calculation.

Measuring Weight and BMI:

1. Select your user profile by pressing "SET" and using "Up"/"Down" buttons.
2. Once your profile is selected, step onto the scale.
3. Your weight will be displayed first, followed by your calculated BMI.

6. Maintenance

6.1 Cleaning

• Wipe the scale surface with a soft, damp cloth.
• Do not use chemical cleaning agents or abrasive materials.
• Ensure the scale is dry before storage or next use.

6.2 Storage

Store the scale in a cool, dry place, away from direct sunlight and extreme temperatures.

6.3 Battery Replacement

When the battery indicator appears on the display, replace the 2 AAA batteries as described in Section 4.1.

7. Troubleshooting

8. Specifications

9. Warranty and Support

CAMRY offers a one-year warranty for this product. For any questions, technical support, or warranty claims, please contact CAMRY customer service. You can reach us via the Amazon Mail System or our service email address, as indicated in your purchase documentation.

Please retain your proof of purchase for warranty purposes.