Introduction
Welcome to the instruction manual for your CubicFun National Geographic 3D Puzzle of the Sagrada Família Barcelona City Model. This kit allows you to construct a detailed replica of the iconic Sagrada Família, providing an engaging and educational building experience. This manual provides step-by-step guidance for assembly, care, and general information about your model.
Image: The complete Sagrada Família 3D puzzle model, accompanied by a National Geographic booklet about Barcelona, set against a backdrop of the Spanish flag.
Safety Information
- Small Parts Warning: This product contains small parts and is not suitable for children under 3 years due to choking hazards.
- Recommended Age: Manufacturer recommended age is 10 years and up. Adult supervision is advised for younger builders.
- Handling: Handle puzzle pieces with care to avoid bending or tearing.
- Storage: Keep unassembled pieces and the finished model away from pets and young children.
Package Contents
Before beginning assembly, please verify that all components are present.
- 184 x 3D Puzzle Pieces (pre-cut, numbered foam board sheets)
- 1 x National Geographic City Traveller Booklet (Barcelona)
- 1 x Instruction Sheet (integrated within the puzzle sheets or as a separate guide)
Image: The contents of the puzzle box, including several sheets of pre-cut foam board pieces and the National Geographic booklet.
Assembly Instructions
The Sagrada Família 3D puzzle consists of 184 pieces designed for assembly without the need for glue or tools. Follow the numbered steps carefully. The estimated assembly time is 60-120 minutes.
- Preparation: Identify all puzzle sheets. Each piece is numbered. It is recommended to punch out pieces as needed to avoid confusion, as some numbers are on the template rather than the piece itself. A small pocket knife or exacto knife can assist in cleanly punching out smaller pieces.
- Step 1: Base Assembly: Begin by assembling the base structure of the model. Refer to the instruction sheet for the correct sequence and orientation of the initial pieces.
- Step 2: Lower Structure: Gradually build up the lower sections of the Sagrada Família, connecting pieces by matching corresponding slots and tabs. Ensure each connection is secure.
- Step 3: Mid-Structure: Continue adding layers and architectural details to form the main body of the cathedral. Pay attention to the intricate designs and ensure proper alignment.
- Step 4: Upper Towers and Details: Construct the distinctive towers and spires. These often involve more delicate connections. Work patiently to achieve stability.
- Step 5: Final Touches: Attach any remaining decorative elements or smaller components to complete the model.
Image: Visual guide illustrating the five main assembly steps for the Sagrada Família 3D puzzle.
Tip: Patience is key. If a piece does not fit easily, double-check its number and orientation against the instructions. Do not force pieces, as this may cause damage.
Usage and Display
Once assembled, your CubicFun Sagrada Família 3D puzzle is ready for display. Place it on a stable, flat surface where it can be admired. The included National Geographic City Traveller Booklet provides historical and cultural context about Barcelona and the Sagrada Família, enhancing your appreciation of the model.
Image: The completed Sagrada Família 3D puzzle model, showcasing its intricate details, placed on a table as a decorative piece.
Maintenance
- Cleaning: To clean the model, gently dust it with a soft, dry cloth or a soft brush. Avoid using water or cleaning solutions, as these may damage the material.
- Storage: If you need to store the model, place it in a sturdy box to protect it from dust and physical damage.
- Environment: Keep the model away from direct sunlight, high humidity, and extreme temperatures to prevent warping or fading.
Troubleshooting
| Problem | Solution |
|---|---|
| Pieces do not fit together. | Ensure you are using the correct pieces by checking their numbers against the instruction sheet. Verify the orientation of the pieces. Do not force connections. |
| A piece is missing or damaged. | Carefully check all sheets and packaging. If a piece is genuinely missing or damaged upon opening, contact CubicFun customer support for assistance. |
| Model is unstable after assembly. | Re-examine connections, especially at the base and between major sections, to ensure all tabs are fully inserted into their corresponding slots. |
Specifications
- Model Number: DS0984HCH
- Brand: CubicFun
- Product Dimensions (Assembled): 9.84 x 7.87 x 12.99 inches (25 x 20 x 33 cm)
- Item Weight: 1.58 pounds
- Number of Pieces: 184
- Recommended Age: 10 years and up
- Assembly Time: 60-120 minutes (approximate)
- Material: EPS Foam Board
Image: A diagram illustrating the physical dimensions of the assembled Sagrada Família 3D puzzle model.
Warranty and Support
CubicFun offers a quality warranty and refund policy for its products. For any questions, concerns, or to report missing/damaged parts, please contact CubicFun customer support.
Please refer to the official CubicFun website or the product packaging for the most current contact information and detailed warranty terms.
