Sharper Image 1080p Action Camera SVC456BL User Manual

1. Introduction

Welcome and thank you for choosing the Sharper Image 1080p Action Camera. This manual provides essential information for the safe and effective operation of your device. Please read it thoroughly before use and retain it for future reference.

2. Product Overview

The Sharper Image SVC456BL is a full HD action camera designed to capture your adventures. It features a waterproof case, allowing for underwater use, and includes mounts for various activities.

This image displays the Sharper Image 1080p Action Camera, encased in its transparent waterproof housing. Below the camera, a black mounting bracket is attached, suitable for securing the camera to handlebars or helmets.

3. What's in the Box

• Sharper Image 1080p Action Camera (SVC456BL)
• Waterproof Case
• Rechargeable Battery
• Bike Mount
• Helmet Mount Clip and Base with Strip
• Micro SD Card (4GB included)
• USB Charging Cable
• User Manual

4. Setup

4.1. Charging the Battery

1. Insert the included battery into the camera.
2. Connect the camera to a power source using the USB charging cable.
3. The charging indicator light will illuminate. Once fully charged, the light will change or turn off (refer to camera's specific indicator behavior).

4.2. Inserting the Micro SD Card

1. Locate the Micro SD card slot on the camera.
2. Gently insert the 4GB Micro SD card (or another compatible card) into the slot until it clicks into place. Ensure correct orientation.

4.3. Attaching the Waterproof Case

1. Open the latch on the waterproof case.
2. Carefully place the camera inside the case, ensuring it fits snugly.
3. Close the latch securely. Perform a water test without the camera first if submerging in water.

4.4. Mounting the Camera

The camera comes with a bike mount and a helmet mount:

• Bike Mount: Attach the bike mount to your bicycle handlebars using the provided screws and clamps. Secure the camera to the mount.
• Helmet Mount: Use the adhesive strip to attach the helmet mount base to a clean, dry surface on your helmet. Secure the camera to the mount clip.

5. Operating the Camera

5.1. Powering On/Off

• To power on, press and hold the Power button for a few seconds.
• To power off, press and hold the Power button again until the camera shuts down.

5.2. Recording Video

1. Ensure the camera is in video recording mode (check the display icon).
2. Press the Record button to start recording. A red indicator light will typically flash.
3. Press the Record button again to stop recording.

5.3. Taking Photos

1. Switch the camera to photo mode (refer to camera's specific mode button).
2. Press the Shutter button to take a photo.

5.4. Playback

1. Enter playback mode (refer to camera's specific mode button).
2. Use the navigation buttons to browse through your recorded videos and photos.
3. Press the OK/Play button to view selected media.

5.5. Digital Zoom

The camera features 4x digital zoom. While recording or in photo mode, use the designated zoom buttons (if available, otherwise it might be a menu option) to adjust the zoom level. Note that digital zoom can reduce image quality.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the camera body. For the lens, use a specialized lens cleaning cloth and solution.
• Waterproof Case: After use in water, rinse the waterproof case with fresh water and allow it to air dry. Inspect the seals regularly for any damage.
• Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.
• Battery Care: Avoid fully discharging the battery frequently. Charge it periodically even if not in use.

7. Troubleshooting

Camera won't turn on:

Ensure the battery is fully charged and correctly inserted.

Recording stops unexpectedly:

Check if the Micro SD card is full or corrupted. Try formatting the card (this will erase all data).

Poor video/photo quality:

Ensure the lens is clean. Check lighting conditions. Avoid excessive digital zoom.

Water leakage in waterproof case:

Immediately remove the camera. Inspect the case seals for dirt, hair, or damage. Ensure the latch is securely closed. Do not use the case if seals are compromised.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Sharper Image website. Keep your purchase receipt as proof of purchase.

Note: Product specifications and features are subject to change without notice.