Blendtec Professional 800 Blender Instruction Manual

Introduction

Welcome to the Blendtec Professional 800 Blender. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new blender. Please read this manual thoroughly before first use and keep it for future reference.

Important Safety Information

• Always ensure the blender is unplugged before assembly, disassembly, or cleaning.
• Do not immerse the motor base in water or other liquids.
• Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender.
• Blades are sharp. Handle with care.
• Do not operate the blender with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• Close supervision is necessary when any appliance is used by or near children.

What's in the Box

• Blendtec Professional 800 Blender Base
• 34 oz GO Travel Bottle
• 90 oz WildSide+ Jar
• Spoonula Spatula
• Sound Enclosure

Image: The Blendtec Professional 800 Blender shown with its included 90 oz WildSide+ jar, 34 oz GO Travel Bottle, and Spoonula spatula.

Setup

1. Unpacking: Carefully remove all components from the packaging. Retain packaging for storage or shipping if needed.
2. Placement: Place the blender base on a stable, flat, and dry surface. Ensure adequate ventilation around the unit.
3. Jar Placement: Place the desired blending jar (e.g., 90 oz WildSide+ Jar) securely onto the motor base.
4. Sound Enclosure: Position the sound enclosure over the jar and base. Ensure it is properly seated to maximize sound dampening.
5. Power Connection: Plug the power cord into a grounded electrical outlet.

Operating Instructions

General Blending

1. Add Ingredients: Place ingredients into the blending jar. For best results, add liquids first, followed by soft ingredients, then hard ingredients, and finally ice or frozen items.
2. Secure Lid: Place the lid firmly onto the blending jar.
3. Select Cycle or Speed: Use the 11-speed capacitive touch slider to manually adjust speed or select one of the six pre-programmed blend cycles (e.g., smoothies, frozen drinks, hot soups).
4. Start Blending: Press the start button. The blender will automatically adjust speed and duration for pre-programmed cycles. For manual blending, adjust the slider as needed.
5. Pulse Function: Use the pulse button for short bursts of high-speed blending to chop ingredients or achieve desired consistency.
6. Stop Blending: The blender will stop automatically after a pre-programmed cycle. For manual blending, press the stop button.

Image: Blendtec Professional 800 Blender control panel, showing the 11-speed capacitive touch slider and icons for six pre-programmed blend cycles.

Sound Enclosure Benefits

The integrated sound enclosure significantly reduces blending noise, allowing for quieter operation. Ensure the enclosure is properly closed during blending for optimal performance.

Image: Blendtec Professional 800 Blender with its sound enclosure, designed to reduce operational noise.

Maintenance and Cleaning

Cleaning the Blending Jar and Lid

1. Quick Clean: After use, add 1 cup of warm water and a drop of dish soap to the jar. Secure the lid and run the "Clean" cycle or blend on low speed for 5-10 seconds. Rinse thoroughly.
2. Deep Clean: Jars and lids are dishwasher safe. Place them on the top rack of your dishwasher.
3. Spoonula Spatula: The Spoonula Spatula is heat-resistant and easy to clean. Wash with warm soapy water or place in the dishwasher.

Image: Blendtec blender jar, highlighting its design for easy cleaning.

Blunt Blade Safety

The Blendtec blender features a blunt blade designed to pulverize ingredients without sharp edges, enhancing safety during cleaning and handling. While blunt, exercise caution when cleaning around the blade area.

Image: Close-up view of the Blendtec blunt blade, designed for effective blending and enhanced safety.

Troubleshooting

Blender does not turn on:

Ensure the power cord is securely plugged into a working electrical outlet. Check if the sound enclosure and jar are correctly seated on the base.

Ingredients are not blending smoothly:

Add more liquid. Use the pulse function to break down larger pieces. Ensure ingredients are added in the recommended order (liquids first). If using the WildSide+ jar, ensure the blunt blade is properly installed.

Blender overheats:

If the blender stops due to overheating, unplug it and allow it to cool down for approximately 20-30 minutes before resuming operation. Avoid continuous blending for extended periods with very thick mixtures.

Loud noise during operation:

Ensure the sound enclosure is properly closed and sealed. Verify the blending jar is correctly seated on the motor base. Some noise is normal during high-speed blending.

Specifications

Warranty and Support

The Blendtec Professional 800 Blender comes with a 10-Year Full Warranty. For warranty claims, technical support, or replacement parts, please contact Blendtec customer service directly. Refer to the official Blendtec website for the most up-to-date contact information and warranty details.

Product Videos