Introduction
Thank you for purchasing the Paladone Game Over 8-bit Pixel Light. This mood light is designed with a classic pixelated 'Game Over' display, offering both static and dynamic lighting effects. The 'Over' section of the light features color-changing capabilities, while the 'Game' section remains white. This manual provides essential information for the safe and effective use of your product.
Image: The Paladone Game Over 8-bit Pixel Light, showcasing its pixelated design and blue 'OVER' illumination.
Safety Information
- Read all instructions before use and retain for future reference.
- This product is for indoor use only. Do not expose to water or high humidity.
- Keep away from direct sunlight and heat sources.
- Do not attempt to disassemble or modify the product.
- Use only the specified power source (USB 5V or batteries as indicated).
- Not suitable for children under 3 years due to small parts.
- Clean with a soft, dry cloth. Do not use abrasive cleaners.
Package Contents
- 1 x Paladone Game Over 8-bit Pixel Light unit
- 1 x USB Power Cable (approximately 46 cm / 18 inches)
Setup
- Powering the Device:
- USB Power: Connect the provided USB cable to the micro-USB port on the back of the light unit. Plug the other end into a USB power adapter (not included) or a powered USB port (e.g., computer, game console).
- Battery Power (Optional): Insert 3 x AAA batteries (not included) into the battery compartment located on the back of the unit. Ensure correct polarity.
- Place the light on a stable, flat surface.
Image: Rear view of the Game Over Light, illustrating the USB power connection and battery compartment.
Operating Instructions
The Paladone Game Over Light features multiple lighting modes controlled by touch buttons on the unit.
- Power On/Off: Locate the power button (often labeled 'A' or a power symbol) on the back or side of the unit. Press once to turn on, press again to turn off.
- Static Color Mode:
- When the light is on, press the mode button (often labeled 'B' or a mode symbol) to cycle through available static colors for the 'OVER' section. The 'GAME' section remains white.
- To select a specific static color, press the mode button until your desired color is displayed.
- Color Phasing Mode:
- Continue pressing the mode button to activate the color phasing mode. In this mode, the 'OVER' section will automatically cycle through red, blue, green, and purple colors.
Image: Illustration of the color phasing mode, showing the 'OVER' text cycling through various colors.
- Sound Reactive Mode:
- Press the mode button until the sound reactive mode is activated. In this mode, the light will react to ambient sounds and music, changing colors or patterns accordingly.
Image: The Game Over Light demonstrating its sound-reactive feature, responding to music.
Maintenance
- Cleaning: Wipe the surface of the light with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or harsh chemicals.
- Storage: When not in use for extended periods, disconnect the power source (unplug USB or remove batteries) and store the light in a cool, dry place.
- Battery Replacement: If using batteries, replace all batteries simultaneously with new ones of the same type. Do not mix old and new batteries or different battery types.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply or low batteries. | Ensure USB cable is securely connected to a powered source, or replace batteries with fresh ones. |
| Light flickers or dims. | Low battery power or unstable USB connection. | Replace batteries or check USB connection and power source. |
| Sound reactive mode not working. | Insufficient ambient sound or incorrect mode selected. | Ensure there is sufficient sound near the unit. Cycle through modes to re-select sound reactive mode. |
| Colors are not changing. | Static color mode is active. | Press the mode button to switch to color phasing or sound reactive mode. |
Specifications
- Model Number: PP5016
- Brand: Paladone
- Dimensions (L x H): Approximately 30 cm (12 inches) x 16 cm (6 inches)
- Power Source: USB 5V (cable included, adapter not included) or 3 x AAA batteries (not included)
- Bulb Type: LED
- Wattage: 5 Watts
- Control Method: Touch
- Features: Color Changing, Sound Reactive
- Material: Plastic
- Color: Black
- Water Resistance: Not waterproof
- Usage: Indoor
Image: Visual representation of the product dimensions.
Warranty and Support
For warranty information and customer support, please refer to the packaging or contact Paladone directly through their official website or customer service channels. Keep your proof of purchase for any warranty claims.
Manufacturer: Paladone Products Ltd