1. Introduction
This manual provides essential information for the safe and efficient operation of your Goplus 1.6HP Shallow Well Pump with Pressure Tank. This pump is designed for various water supply applications, including residential homes, farms, cabins, and irrigation systems. It features a 1200W motor, a 5-gallon pressure tank, and is capable of delivering up to 1000 GPH with a maximum lift of 164 feet.
Image 1.1: Overview of the Goplus Shallow Well Pump with Pressure Tank, highlighting its purpose to enhance water experience.
2. Safety Instructions
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury.
- Ensure the power supply matches the pump's specifications (120V/60Hz).
- Do not operate the pump with a damaged cord or plug.
- Keep children and unauthorized persons away from the operating pump.
- Disconnect power before servicing or performing maintenance.
- Protect the pump from freezing temperatures.
- Ensure proper grounding to prevent electric shock.
- Do not pump flammable or corrosive liquids.
- The pump is rated IPX4 for splash resistance; avoid submerging it.
3. Product Components
Familiarize yourself with the main components of your shallow well pump:
Image 3.1: Detailed diagram illustrating the various parts of the Goplus Shallow Well Pump, including the motor, pressure tank, and controls.
- Motor: 1.6HP permanent magnet separation capacitor motor with 1200W power.
- Pressure Tank: 5-gallon capacity to maintain consistent water pressure.
- Pressure Gauge: Displays real-time pressure within the system.
- Automatic Pressure Switch: Automatically turns the pump ON when pressure drops below 20 PSI and OFF when it reaches 40 PSI.
- Safety Switch: Provides overheat protection and is IPX4 rated.
- Slide Valve: For easy operation and control.
- Heat Dissipation Vent: Ensures proper cooling of the motor.
- Inlet (1" NPT): Connection point for water intake.
- Outlet (1" NPT): Connection point for water discharge.
- Non-slip Base: Provides stability during operation.
- Power Cord: 4 ft long cord for electrical connection.
4. Setup and Installation
Proper installation is crucial for optimal performance and longevity of your pump.
4.1 Site Selection
- Choose a dry, level, and well-ventilated location.
- Ensure the pump is protected from direct sunlight, rain, and freezing temperatures.
- Place the pump as close to the water source as possible to minimize suction lift.
4.2 Plumbing Connections
- Connect the suction line (from the water source) to the 1" NPT Inlet.
- Connect the discharge line (to your irrigation system or home) to the 1" NPT Outlet.
- Use appropriate thread sealant on all connections to prevent leaks.
- Ensure all pipes are securely fastened and supported.
4.3 Priming the Pump
Before first use or after the pump has run dry, it must be primed:
Image 4.1: Illustration of adding clean water to the pump's priming port before initial operation.
- Ensure all connections are tight.
- Locate the priming port (usually a cap on top of the pump housing).
- Remove the priming cap.
- Slowly fill the pump housing with clean water until it overflows.
- Replace the priming cap securely.
- The pump is now primed and ready for operation.
Image 4.2: Visual guide demonstrating the priming process, emphasizing the use of clean water after connecting inlet and outlet hoses.
5. Operating Instructions
Follow these steps for safe and effective operation of your Goplus pump.
- Ensure the pump is properly primed (see Section 4.3).
- Verify all connections are secure and leak-free.
- Plug the power cord into a grounded 120V/60Hz electrical outlet.
- Turn on the safety switch. The pump will start automatically when the pressure drops below 20 PSI and stop when it reaches 40 PSI.
- Monitor the pressure gauge to ensure proper operation.
- After use, if the pump will not be used for an extended period, disconnect power and drain the pump to prevent freezing.
Image 5.1: Diagram illustrating the pump's performance capabilities, including maximum lift (164 ft), maximum flow (1000 GPH), and maximum suction (26 ft).
Image 5.2: Flow diagram demonstrating how the pump moves water from a well to a tap, detailing flow rates at various lift heights.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your pump.
- Cleaning: Periodically clean the exterior of the pump. Do not use harsh chemicals.
- Winterization: In cold climates, drain the pump completely before freezing temperatures to prevent damage. Store in a dry, warm place.
- Inspection: Regularly inspect the power cord, connections, and pump housing for any signs of wear or damage.
- Priming: Re-prime the pump if it runs dry or after maintenance that involves draining the system.
7. Troubleshooting
Refer to this section for common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not start | No power; tripped circuit breaker; faulty switch. | Check power connection; reset breaker; inspect switch. |
| Pump runs but no water flows | Pump not primed; air leak in suction line; clogged inlet. | Prime the pump; check suction line for leaks; clear inlet. |
| Low water pressure | Partial clog; air in system; worn impeller. | Check for clogs; re-prime; contact service for impeller replacement. |
| Pump cycles too frequently | Pressure tank issue; small leak in system. | Check pressure tank air charge; inspect system for leaks. |
| Pump overheats and shuts off | Motor overload; insufficient ventilation; running dry. | Allow to cool; ensure proper ventilation; ensure pump is primed. |
8. Specifications
Technical specifications for the Goplus 1.6HP Shallow Well Pump:
Image 8.1: Visual representation of the pump's dimensions and key performance specifications.
- Model: SU-25184
- Rated Power: 1.6 HP (1200W)
- Voltage: 120V/60Hz
- Max Flow Rate: 1000 GPH
- Max Lift: 164 FT
- Max Suction: 26 FT
- Pressure Tank Capacity: 5 Gallons
- Automatic Pressure Switch Settings: ON < 20 PSI, OFF > 40 PSI
- Inlet/Outlet Size: 1" NPT
- Protection Class: IPX4
- Max Water Temperature: 95°F (35°C)
- Material: Cast Iron (Motor Housing)
- Item Weight: 30.2 lbs
- Power Cord Length: 4 ft
9. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official Goplus website. You can also visit the Goplus Store on Amazon for additional resources.
Please retain your purchase receipt for warranty claims.
10. Applications
The Goplus Shallow Well Pump is versatile and suitable for a variety of applications:
- Home Water Supply: Providing fresh well water to residential homes and cabins.
- Garden & Lawn Irrigation: Efficiently watering gardens, lawns, and agricultural structures.
- Water Boosting: Increasing water pressure for low-pressure systems.
- Cleaning Tasks: Suitable for tasks like car washing or general outdoor cleaning.
- Pool Maintenance: Assisting with pool filling or drainage (ensure water is clean).
Image 10.1: A collage showcasing various applications of the pump, including gardening, agriculture, pool maintenance, and cleaning.
