Elekpia EN2A27 Universal Remote Control for Hisense Smart TVs Instruction Manual

1. Introduction

This manual provides instructions for the Elekpia EN2A27 Universal Remote Control, designed for use with various Hisense 4K LED HD UHD Smart TV models. This remote is pre-programmed and requires no additional setup for compatible televisions. Please read this manual thoroughly to ensure proper use and to maximize your experience.

2. Product Overview

The Elekpia EN2A27 remote control is a direct replacement or universal option for a wide range of Hisense televisions. It offers essential functions for navigating your TV's features and smart applications.

2.1 Key Features

• No programming required for compatible Hisense TV models.
• Direct access buttons for popular streaming services (Netflix, Amazon, Vudu, YouTube).
• Standard TV control functions including Power, Input, Volume, Channel, and Navigation.

2.2 Compatible Models

This remote is compatible with numerous Hisense TV models, including but not limited to:

• 32H5C, 40H5C, 40H5B, 43H5C, 43H6C, 43H7C
• 50CU6000, 50H5C, 50H6B, 50H6C, 50H7C, 50H7GB, 50H7GB1, 50H8C
• 55H5C, 55H6B, 55H7B, 55H7C, 55H8C, 55H9B2
• 65CU6200, 65H6C, 65H7B2, 65H7C, 65H8C, 65H10B, 65H10B2
• LTDN55K2203GWUS, 40K368AW, 50H6SG, 55H65G, 55H6SG, 55H7G
• LC17340N5000U, LC-17343N5000U, LC-17343N6100U, LC-17343N7000U, LC-17350N5000U, LC-17350N6000U, LC173-50N7000U, LC173-55N6000U, LC-17355N7000U, LC-17360N5100U, LC173-60N6200U, LC173-60N7000U, LC173-65N5200U, LC-17365N7000U, LC173-65N9000U, LC173-75N8000U, LC-40N5000U, LC-43N7000U, LC-50N5000U, LC-50N7000U, LC55N620CU, LC-55N7000U, LC-60N6200U, LC-60N7000U, LC-65N7000U, LC-75N620CU, N6200U, RT167723, ERF6B11

3. Setup

3.1 Battery Installation

The Elekpia EN2A27 remote control requires two (2) AAA batteries (not included) for operation. Follow these steps to install the batteries:

1. Locate the battery compartment on the back of the remote control.
2. Press down on the tab and slide the battery cover downwards to open it.
3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Slide the battery cover back into place until it clicks securely.

Image: Rear view of the Elekpia EN2A27 remote control with the battery compartment open, illustrating where to insert two AAA batteries.

Once batteries are installed, the remote is ready for use with your compatible Hisense TV. No additional pairing or programming is typically required.

4. Operating Instructions

This section details the functions of the buttons on your Elekpia EN2A27 remote control.

Image: Front view of the Elekpia EN2A27 remote control, displaying the layout of all buttons.

4.1 Button Functions

5. Maintenance

5.1 Cleaning

To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.

5.2 Battery Replacement

Replace batteries when the remote's responsiveness decreases or it stops functioning. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.

5.3 Storage

Store the remote in a cool, dry place away from direct sunlight and extreme temperatures. If the remote will not be used for an extended period, it is recommended to remove the batteries to prevent leakage.

6. Troubleshooting

If you encounter issues with your remote control, refer to the following common solutions:

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the retailer or manufacturer's official website where the product was purchased. Keep your purchase receipt as proof of purchase.