Digipartspower AC Adapter User Manual

Introduction

This manual provides essential instructions for the safe and effective use of your Digipartspower AC Adapter. This adapter is designed to power Motorola CH610, CH620, CH640, CH610D, and CH610E radio desktop charger docks. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

To ensure safe operation and prevent damage, observe the following safety precautions:

• Over Current Protection (OCP): The adapter is designed to protect against excessive current flow.
• Over Voltage Protection (OVP): The adapter includes safeguards against voltage surges.
• Over Temperature Protection (OTP): Internal mechanisms prevent overheating.
• Short Circuit Protection (SCP): Protection against short circuits is integrated.
• Use only with compatible devices as specified.
• Do not expose the adapter to water, moisture, or extreme temperatures.
• Do not disassemble or attempt to repair the adapter. Refer servicing to qualified personnel.
• Ensure the power outlet voltage matches the adapter's input voltage (120V AC).
• Keep out of reach of children.

Product Overview

Image 1: Top-down view of the Digipartspower AC Adapter, showing the main unit, attached power cord, and standard US plug. The adapter casing is black with ventilation slots.

The Digipartspower AC Adapter is a compact and portable power supply designed for specific Motorola radio desktop chargers. It features a durable black casing and a standard two-prong AC plug for wall outlets.

Setup Instructions

1. Unpack the Adapter: Carefully remove the AC adapter from its packaging.
2. Inspect for Damage: Before use, visually inspect the adapter and its cables for any signs of damage. Do not use if damaged.
3. Connect to Charger Dock: Locate the power input port on your Motorola CH610, CH620, CH640, CH610D, or CH610E radio desktop charger dock. Insert the adapter's output connector firmly into this port.
4. Plug into Power Outlet: Insert the AC adapter's plug into a standard 120V AC wall outlet. Ensure the connection is secure.
5. Verify Power: Once connected, your radio desktop charger dock should receive power, indicated by any power lights on the dock.

Image 2: Angled view of the Digipartspower AC Adapter, highlighting the product label with specifications such as model number (ND-BLL-0161500D), input (AC110V 50Hz), and output (AC). The standard US plug is visible.

Operating Instructions

Once the adapter is properly set up and connected to your Motorola radio desktop charger dock, it will provide continuous power for charging or operating your radio. No further user interaction with the adapter itself is typically required during operation.

• Place your Motorola radio into the charger dock as per the radio's own instruction manual.
• Monitor the charging indicator on your radio or charger dock to confirm charging status.
• Disconnect the adapter from the wall outlet when not in use for extended periods.

Maintenance

The Digipartspower AC Adapter requires minimal maintenance:

• Cleaning: Disconnect the adapter from the power outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
• Inspection: Periodically check the adapter and its cables for any signs of wear, cuts, or damage. Replace the adapter if any damage is observed.

Troubleshooting

If you encounter issues with your AC adapter, refer to the following common solutions:

• No Power to Charger Dock:
  • Ensure the adapter is securely plugged into both the wall outlet and the charger dock.
  • Check if the wall outlet is functional by plugging in another device.
  • Inspect the adapter cable for any visible damage.
• Adapter Overheating:
  • Disconnect the adapter immediately.
  • Ensure there is adequate ventilation around the adapter. Do not cover it.
  • If overheating persists, discontinue use and contact support.
• Radio Not Charging:
  • Verify that the radio is correctly seated in the charger dock.
  • Consult the radio's instruction manual for specific charging procedures.
  • Ensure the adapter is providing power to the dock (see "No Power to Charger Dock" above).

Specifications

Image 3: Side view of the Digipartspower AC Adapter, providing a clear look at the product label and its detailed specifications. The robust casing and ventilation are visible.

Warranty and Support

For warranty information or technical support, please contact the manufacturer, Digipartspower, directly through their official channels or the retailer from whom the product was purchased. Please have your product model and purchase date available when contacting support.

Manufacturer: Digipartspower