Bosal In-R-Form Double Sided Fusible Foam Stabilizer Instruction Manual

Introduction

The Bosal In-R-Form Double Sided Fusible Foam Stabilizer is designed to provide shape, body, and stability to various sewing and craft projects. This product features a double-sided fusible adhesive, making it easy to apply to fabric. It is soft, formable, and needle-friendly, suitable for a range of applications from bags to home decor.

Image 1: Packaging for Bosal In-R-Form Double Sided Fusible Foam Stabilizer. The label highlights its double-sided fusible nature, soft and formable texture, and ease of stitching.

Setup and Preparation

Before applying the Bosal In-R-Form stabilizer, ensure your fabric is prepared according to its specific care instructions. Pre-washing and pressing fabric is often recommended to prevent shrinkage and ensure a smooth application.

1. Fabric Preparation: Pre-wash and dry your fabric if desired, then press it to remove any wrinkles.
2. Cutting the Stabilizer: Cut the Bosal In-R-Form stabilizer to the required dimensions for your project. It can be cut with scissors or a rotary cutter.
3. Test Piece: It is advisable to test the fusing process on a small scrap of your project fabric and stabilizer to ensure optimal results.

Application Instructions (Operating)

The Bosal In-R-Form is a double-sided fusible foam stabilizer, designed for easy application using heat.

1. Positioning: Place the cut piece of Bosal In-R-Form stabilizer between two layers of fabric, ensuring the fusible sides are facing the wrong sides of the fabric. The stabilizer has a napped tricot surface on both sides, which is the fusible adhesive.
2. Heat Application: Using a dry iron set to a medium-high temperature (wool/cotton setting), press firmly over the fabric and stabilizer. Apply even pressure for 10-15 seconds in each area. Avoid gliding the iron, instead, lift and press.
3. Cooling: Allow the fused piece to cool completely before handling or moving. This allows the adhesive to set properly, creating a strong bond.
4. Second Side (if applicable): If fusing to a second piece of fabric, repeat the heat application process on the other side.
5. Stitching: Once fused, the stabilizer is ready for stitching. Its needle-friendly nature allows for smooth sewing.

Image 2: Example of a project bag constructed using Bosal In-R-Form stabilizer, demonstrating the product's ability to provide structure and shape.

Maintenance and Care

Items constructed with Bosal In-R-Form Double Sided Fusible Foam Stabilizer can be machine washed.

• Washing: Machine wash finished projects using a gentle cycle with cold or warm water.
• Drying: Tumble dry on low heat or air dry. Avoid high heat, which could potentially affect the fusible bond over time.
• Ironing: If ironing is needed after washing, use a medium-low setting and avoid direct, prolonged heat on the stabilizer itself.

Troubleshooting

• Stabilizer Not Fusing:
  • Ensure the iron is set to a medium-high temperature (wool/cotton).
  • Apply firm, even pressure for the recommended 10-15 seconds per section.
  • Allow the fused piece to cool completely before checking the bond.
• Bubbling or Wrinkling:
  • Ensure the fabric is smooth and wrinkle-free before application.
  • Apply heat evenly and avoid sliding the iron, which can distort the stabilizer or fabric.
  • Allow adequate cooling time for the adhesive to set.
• Difficulty Stitching:
  • Use a sharp, appropriate needle for your sewing machine (e.g., a denim or topstitch needle for thicker layers).
  • Adjust stitch length and tension as needed for the added thickness.

Specifications

Warranty Information

Specific warranty details for the Bosal In-R-Form Double Sided Fusible Foam Stabilizer are not provided in the product information. For any warranty-related inquiries, please contact Bosal directly using the support information below.

Support

For further assistance, questions, or technical support regarding your Bosal In-R-Form Double Sided Fusible Foam Stabilizer, please contact the manufacturer:

• Manufacturer: Bosal Foam & Fiber
• Address: 171 Washington Street, PO Box 489, Limerick, Maine 04048, USA
• Phone: (800) 343-1818
• Fax: (207) 793-4106
• Email: office@bosalfoam.com