Stalgast GE333
STALGAST GE333 Universal Stainless Steel Dishwasher
User Manual
1. Introduction and Overview
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your STALGAST GE333 Universal Stainless Steel Dishwasher. Please read this manual thoroughly before operating the appliance and retain it for future reference.
The STALGAST GE333 is a robust, professional-grade dishwasher designed for universal use, suitable for rinsing GN 1/1 containers and sheets. It features electromechanical control, integrated temperature displays for both the boiler and the wash chamber, and includes automatic dosing pumps for detergent and rinse aid, as well as a drain pump. Washing is performed by two wash arms, located at the top and bottom of the device.

Figure 1: Front view of the STALGAST GE333 Universal Stainless Steel Dishwasher, showcasing its stainless steel construction and control panel.
2. Safety Instructions
WARNING: Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to the appliance.
- Always ensure the appliance is properly grounded.
- Do not operate the dishwasher with a damaged power cord or plug.
- Keep children and unauthorized personnel away from the appliance during operation.
- Use only detergents and rinse aids specifically designed for commercial dishwashers.
- Never open the door during a wash cycle.
- Disconnect the appliance from the power supply before performing any cleaning or maintenance.
- Ensure adequate ventilation around the appliance.
- Installation and repairs should only be performed by qualified personnel.
3. Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your dishwasher.
3.1 Unpacking
Carefully remove the dishwasher from its packaging. Inspect for any shipping damage. Report any damage to your supplier immediately.
3.2 Placement
Place the dishwasher on a stable, level surface. Ensure there is sufficient space for ventilation and access for maintenance.
3.3 Electrical Connection
The appliance can operate on either 4.9 kW (400 Volt) or 3.4 kW (230 Volt). Ensure the electrical supply matches the appliance's requirements and is installed by a certified electrician. The appliance must be properly grounded.
3.4 Water Connection
Connect the dishwasher to a cold water supply. For protection against limescale deposits, the installation of a water softener is strongly recommended if the water hardness exceeds 6°dH (German hardness). Limescale buildup can severely impact performance and lifespan.
3.5 Drainage Connection
Connect the drain hose to a suitable drainage system. The appliance is equipped with an integrated drain pump.

Figure 2: Top view of the STALGAST GE333, showing the robust stainless steel casing and integrated control panel.
4. Operating Instructions
Follow these steps for efficient operation of your STALGAST GE333 dishwasher.
4.1 Loading the Dishwasher
The dishwasher accommodates baskets of 500 x 500 mm (W x D) and has an insertion height of 320 mm, suitable for GN 1/1 containers and sheets. Ensure items are loaded correctly to allow water to reach all surfaces.
4.2 Adding Detergent and Rinse Aid
The appliance features automatic dosing for both detergent and rinse aid. Ensure the external containers for these chemicals are adequately filled. Refer to the chemical manufacturer's instructions for proper concentration.

Figure 3: Internal view highlighting the automatic detergent and rinse aid dosing pumps, ensuring precise chemical delivery for optimal cleaning.
4.3 Selecting a Wash Cycle
The STALGAST GE333 offers two wash cycles:
- 120-second cycle: For lightly soiled items or quick washes.
- 180-second cycle: For heavily soiled items requiring more intensive cleaning.
Select the desired cycle using the control panel buttons. The control panel also features temperature displays for the boiler and wash chamber.

Figure 4: Close-up of the control panel with electromechanical buttons and indicator lights, alongside the robust stainless steel handle.
4.4 Starting the Wash Cycle
Close the door securely. Press the start button corresponding to your chosen cycle. The dishwasher will automatically fill with water, heat it, dispense chemicals, and begin the wash process.
Water consumption per cycle is approximately 2.5 liters.
4.5 After the Cycle
Once the cycle is complete, the appliance will indicate its finish. Carefully open the door to allow steam to escape before unloading the clean items.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your dishwasher.
5.1 Daily Cleaning
- After each day of operation, drain the dishwasher and clean the interior, including the wash arms and filters.
- Remove any food debris from the filters and wash arms.
- Wipe down the exterior with a damp cloth. Do not use abrasive cleaners.

Figure 5: Interior view of the wash chamber, showing the upper and lower wash arms and the integrated filter system at the bottom.
5.2 Chemical Use
For impeccable rinsing results, the use of professional cleaning chemistry is recommended. Ensure the correct type and concentration of chemicals are used as per manufacturer guidelines.
5.3 Limescale Prevention
If a water softener is not installed, or if water hardness is high, regular descaling may be necessary. Consult a professional for descaling procedures to avoid damage to internal components.
5.4 Professional Servicing
It is recommended to have the dishwasher professionally serviced periodically to ensure all components are functioning correctly and to prevent potential issues.
6. Troubleshooting
This section provides solutions to common issues you might encounter. For problems not listed here, contact qualified service personnel.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher does not start | No power supply; Door not closed properly; Cycle not selected. | Check power connection and circuit breaker; Ensure door is latched; Select a wash cycle. |
| Poor cleaning results | Clogged wash arms/filters; Incorrect detergent/rinse aid dosage; Overloaded basket; Limescale buildup. | Clean wash arms and filters; Check chemical levels and dosing settings; Do not overload; Consider water softener or descaling. |
| Water not draining | Drain hose kinked or blocked; Drain pump malfunction. | Check drain hose for obstructions; Contact service if pump is faulty. |
| Excessive foam | Too much detergent; Incorrect detergent type. | Reduce detergent quantity; Use only low-foaming commercial dishwasher detergent. |
7. Specifications
| Feature | Detail |
|---|---|
| Model | GE333 |
| Brand | Stalgast |
| Material | Stainless Steel |
| Control Type | Electromechanical |
| Dimensions (W x D x H) | 565 x 665 x 835 mm |
| Basket Size (W x D) | 500 x 500 mm |
| Insertion Height | 320 mm |
| Wash Cycles | 120 seconds, 180 seconds |
| Water Consumption per Cycle | Approx. 2.5 liters |
| Electrical Power (400V) | 4.9 kW |
| Electrical Power (230V) | 3.4 kW |
| Special Features | Detergent dosing, Rinse aid dosing, Drain pump, Boiler/Chamber temperature display, Upper/Lower wash arms. |
| Included Components | Plate basket, Universal basket, Cutlery basket. |
8. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your authorized STALGAST dealer. Keep your proof of purchase for warranty claims.
For technical support, spare parts, or service inquiries, please contact your supplier or the STALGAST customer service department. Provide your product model (GE333) and serial number (if applicable) when contacting support.
Manufacturer: Stalgast
ASIN: B07LH4GNFG
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.




