1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Magnadyne LS2WP-PAIR 3-inch Water Resistant Surface Mount Satellite Speakers with LED Lighting. These speakers are designed for marine, RV, and hot tub environments, offering robust performance and integrated LED illumination. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
2. Safety Information
Always observe the following safety precautions:
- Electrical Safety: Ensure all power is disconnected before performing any wiring or installation. Incorrect wiring can lead to electrical shock, fire, or damage to the speakers and audio system.
- Water Resistance: While these speakers are water-resistant, they are not designed for submersion. Ensure all connections are properly sealed to prevent water ingress.
- Mounting: Mount speakers securely to a stable surface to prevent detachment during use or movement of the vehicle/vessel.
- Ventilation: Ensure adequate ventilation around the speakers to prevent overheating, although these are surface-mount units.
- Operating Temperature: Avoid operating the speakers in extreme temperatures outside their specified range.
3. What's in the Box
Your Magnadyne LS2WP-PAIR package includes:
- 2 x Magnadyne 3-inch Surface Mount Satellite Speakers with LED Lighting
Note: Mounting hardware and wiring connectors may be included or sold separately depending on the retailer.
4. Product Overview
The Magnadyne LS2WP-PAIR speakers are designed for durability and performance in challenging outdoor environments. They feature a compact, surface-mount design with integrated LED lighting.
Key Features:
- High-Quality 3" Marine or RV Speakers: Designed to withstand harsh marine environments, UV-resistant for long-lasting performance.
- Powerful Sound: 30 watts of power with a frequency response of 250-18,000 kHz.
- Wide Compatibility: 4 Ohm impedance for compatibility with most audio systems.
- Stylish Built-In LED Lighting: Available in blue, white, or amber LED colors.
- Superior Sound Quality: Enjoy clear, powerful audio for the ultimate listening experience.
Product Views:
5. Installation
Follow these steps for proper installation of your Magnadyne speakers:
5.1 Tools Required:
- Drill with appropriate drill bits
- Screwdriver (Phillips head recommended)
- Wire strippers/crimpers
- Heat gun (optional, for silicone removal)
- Plastic razor blade (optional, for silicone removal)
- Marine-grade sealant/silicone
- Measuring tape and marker
5.2 Mounting Instructions:
- Choose Location: Select a flat, stable surface for mounting. Ensure there is enough space behind the mounting surface for wiring. Refer to the technical drawing for speaker dimensions (6.5" H x 4.375" W x 2" D).
- Mark Holes: Use the speaker as a template to mark the positions for the mounting screws and the central wire access hole.
- Drill Holes: Carefully drill pilot holes for the mounting screws and a larger hole (approximately 3/4" to 1") for the wiring to pass through.
- Prepare Surface: Clean the mounting surface thoroughly. If replacing old speakers, remove any old sealant. A heat gun and plastic razor blade can assist in removing stubborn silicone residue.
5.3 Wiring Instructions:
The speakers come with pre-labeled wires for easy connection:
- LED 12V+: Red wire (for LED positive power)
- LED Ground: Black wire (for LED negative/ground)
- Speaker +: White wire (for speaker positive audio signal)
- Speaker -: Gray wire (for speaker negative audio signal)
- Connect Speaker Wires: Connect the speaker positive (white) and negative (gray) wires to your audio system's corresponding speaker outputs. Ensure correct polarity for optimal sound.
- Connect LED Wires: Connect the LED 12V+ (red) wire to a switched 12V power source and the LED Ground (black) wire to a suitable ground point. This allows you to control the LED lights independently.
- Secure Connections: Use appropriate marine-grade connectors (e.g., heat-shrink butt connectors) to ensure secure and water-resistant electrical connections.
5.4 Final Mounting:
- Apply Sealant: Apply a bead of marine-grade sealant around the wire access hole and the perimeter of the speaker's mounting surface to create a watertight seal.
- Mount Speaker: Carefully feed the wires through the access hole and align the speaker with the pilot holes. Secure the speaker using appropriate screws. Do not overtighten.
- Test: Once mounted and wired, test both the speaker audio and the LED lighting functionality.
5.5 Installation Video:
For a visual guide on replacing and installing RV speakers with LED lights, please refer to the video below:
Video demonstrating the removal of old RV speakers and installation of new ones with LED lights, including tips for silicone removal and wiring.
6. Operation
6.1 Audio Playback:
Once properly installed and connected to your audio system, the speakers will play audio when the system is turned on. Adjust volume and audio settings via your primary audio unit.
6.2 LED Lighting:
The integrated LED lights operate independently of the speaker audio. If wired to a separate switch, activate the switch to turn the LED lights on or off. The LED lights provide ambient illumination.
7. Maintenance
To ensure the longevity and optimal performance of your Magnadyne speakers:
- Cleaning: Clean the speaker grilles and housing periodically with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or water-resistant properties.
- Sealant Inspection: Regularly inspect the sealant around the speakers for cracks or deterioration. Reapply marine-grade sealant as needed to maintain water resistance.
- Wiring Inspection: Periodically check all wiring connections for corrosion or looseness. Secure or replace any compromised connections.
- UV Protection: While UV-resistant, prolonged exposure to direct sunlight can still affect the material over many years. Consider covering the speakers when not in use for extended periods in harsh sun.
8. Troubleshooting
If you encounter issues with your speakers, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound from Speakers |
|
|
| LED Lights Not Working |
|
|
| Distorted Sound |
|
|
| Water Leakage Around Speaker |
|
|
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Magnadyne |
| Model Number | LS2WP-PAIR |
| Speaker Type | Satellite, Coaxial |
| Speaker Size | 3 Inches |
| Speaker Maximum Output Power | 30 Watts |
| Frequency Response | 250-18,000 kHz |
| Impedance | 4 Ohms |
| Input Voltage | 12.5 Volts |
| Mounting Type | Surface Mount |
| Water Resistance Level | Water Resistant |
| Additional Features | Built-In LED Light, UV Resistant |
| Item Dimensions (D x W x H) | 6.45"D x 2.04"W x 4.37"H (Note: This seems to be package dimensions, actual speaker dimensions are 6.5" H x 4.375" W x 2" D from technical drawing) |
| Number of Items | 2 (Pair) |
10. Warranty & Support
10.1 Warranty Information:
Magnadyne products are covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Magnadyne website. Keep your proof of purchase for warranty claims.
10.2 Customer Support:
If you require assistance with installation, troubleshooting, or have questions about your Magnadyne LS2WP-PAIR speakers, please contact Magnadyne customer support. Contact information can typically be found on the product packaging or the official Magnadyne website (www.magnadyne.com).