Breo Scalp Mini Portable Scalp Massager Instruction Manual

1. Introduction and Overview

The Breo Scalp Mini is a portable, IPX7 waterproof wireless massager designed to provide deep massage relaxation for the scalp and various body parts. Its ergonomic design mimics traditional massage techniques to help reduce soreness and stiffness.

2. Safety Information

• Do not use the massager on broken skin or near the eyes.
• Keep the massager away from direct contact with water while charging.
• Always follow the manufacturer's instructions for charging and using the massager.
• The device is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. Ensure the charging port is completely dry before connecting the charging cable.

3. Package Contents

• Breo Scalp Mini Massager Unit
• Charging Base
• USB Charging Cable

4. Setup

4.1 Charging the Device

Before first use, fully charge the Breo Scalp Mini. The device is rechargeable via a USB cable and charging base.

1. Connect the USB charging cable to the charging base.
2. Place the massager unit onto the charging base. Ensure the magnetic connectors align properly.
3. Connect the USB cable to a suitable power adapter (not included) or a USB port.
4. The indicator light on the massager will show charging status. A full charge takes approximately 6 hours.

5. Operating Instructions

5.1 Powering On/Off and Mode Selection

1. To power on the device, press and hold the power button located on the top of the massager.
2. The massager will start in its default mode. Press the power button briefly to cycle through different massage modes (if applicable).
3. To power off the device, press and hold the power button again until the device stops.

5.2 Using the Massager

The Breo Scalp Mini is designed for versatile use on various body parts, including the scalp, neck, shoulders, back, legs, and waist.

• Scalp Massage: Gently place the massager on your scalp. Allow the rotating nodes to provide a deep, relaxing massage. For users with long hair, avoid moving the massager across the scalp to prevent tangling. Instead, lift and reposition the massager to different areas of the scalp. The IPX7 waterproof feature allows for use as an automatic shampoo brush during showers.
• Body Massage: Apply the massager to areas such as the neck, shoulders, back, legs, or waist. The ergonomic design fits comfortably in hand, and the nodes mimic human fingers to effectively reduce soreness and stiffness.

5.3 Official Product Video

6. Maintenance

6.1 Cleaning

The massager heads are made from food-grade soft silicone, designed to be skin-friendly and easy to clean.

• The massager is IPX7 waterproof, allowing it to be rinsed under water.
• The massage heads can be removed for thorough cleaning. Gently detach them from the main unit, clean with mild soap and water, then rinse and allow to air dry completely before reattaching.

7. Troubleshooting

• Device not turning on: Ensure the device is fully charged. Connect it to the charging base and allow sufficient time for charging (approx. 6 hours).
• Charging issues: Verify that the USB cable and charging base are correctly connected and that the power source is functional. If a charging cord was missing upon receipt, contact customer support.
• Massage heads detaching: If the rubber feet or massage heads frequently fall off, ensure they are securely attached. If the issue persists, contact customer support.
• Unexpected noise: Some operational noise is normal. If the noise level is unusually high or indicates a malfunction, discontinue use and contact customer support.
• Hair tangling: When using on the scalp, avoid dragging the massager. Instead, lift and reposition it to different areas to prevent hair from getting caught in the rotating nodes.

8. Specifications

9. Warranty and Support

For warranty information, product support, or to report any issues, please contact Breo customer service. Refer to the product packaging or the official Breo website for contact details.