1. Introduction
This manual provides detailed instructions for the proper setup, operation, and maintenance of your ELEMENT ELEFT326 TV Remote Control, model XHY-353-3. This remote control is designed to operate compatible ELEMENT televisions. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
2. Product Overview
Image: Front view of the ELEMENT ELEFT326 TV Remote Control. The remote is black with gray buttons. At the top, a red circular POWER button is prominent. Below it are function buttons like P.MODE, S.MODE, SLEEP, and ASPECT, followed by a standard numeric keypad (0-9). Central to the remote are the VOL (Volume) and CH (Channel) rocker buttons, with MUTE and SOURCE buttons in between. A MENU button is located above a directional pad with an OK button in the center. INFO, MTS, FREEZE, CH.LIST, RETURN, and EXIT buttons surround the directional pad. Below these are media control buttons (play, stop, rewind, fast forward). The bottom section includes REPEAT, C.C (Closed Caption), V-CHIP, AUTO, ADD/ERASE, and FAV (Favorites) buttons. The ELEMENT logo is visible at the very bottom.
3. Setup
3.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or outwards to open it.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
Note: Always replace both batteries at the same time. Do not mix old and new batteries or different types of batteries. Remove batteries if the remote will not be used for an extended period.
4. Operating Instructions
The ELEMENT ELEFT326 remote control provides access to various functions of your compatible ELEMENT TV. Below is a guide to the primary buttons and their functions:
- POWER (Red Button): Turns the TV on or off.
- USB: Accesses content from a connected USB device.
- P.MODE (Picture Mode): Cycles through various picture presets (e.g., Standard, Dynamic, Movie).
- S.MODE (Sound Mode): Cycles through various audio presets (e.g., Standard, Music, Movie).
- SLEEP: Sets a timer for the TV to automatically turn off.
- ASPECT: Changes the screen aspect ratio (e.g., 16:9, 4:3, Zoom).
- Numeric Keypad (0-9): Directly enters channel numbers.
- - (Dash): Used for entering sub-channels (e.g., 7-1).
- VOL +/-: Increases or decreases the volume level.
- CH +/-: Changes the channel up or down.
- MUTE: Silences or restores the TV audio.
- SOURCE: Selects the input source (e.g., HDMI 1, AV, TV).
- MENU: Displays the main on-screen menu for TV settings.
- MTS (Multi-channel Television Sound): Selects audio tracks (e.g., Stereo, SAP).
- FREEZE: Pauses the current image on the screen.
- INFO: Displays information about the current program or input.
- Directional Pad (Up, Down, Left, Right): Navigates through menus and options.
- OK: Confirms selections in menus.
- RETURN: Goes back to the previous menu or screen.
- EXIT: Closes the current menu or on-screen display.
- CH.LIST (Channel List): Displays the list of available channels.
- Media Control Buttons (Play, Stop, Rewind, Fast Forward): Controls playback of media content (e.g., from USB).
- REPEAT: Repeats a track or section during media playback.
- C.C (Closed Caption): Toggles closed captions on or off.
- V-CHIP: Accesses V-Chip settings for parental control.
- AUTO: Initiates auto-tuning or auto-adjustment functions.
- ADD/ERASE: Manages channel lists (add or remove channels).
- FAV (Favorites): Accesses favorite channel lists.
5. Troubleshooting
If you encounter issues with your remote control, please refer to the following common solutions:
- Remote not responding:
- Ensure there is a clear line of sight between the remote and the TV's infrared sensor.
- Check if the batteries are inserted correctly with the correct polarity (+/-).
- Replace the batteries with new ones. Weak batteries are a common cause of unresponsiveness.
- Buttons are sticky or unresponsive:
- Clean the remote control, especially around the buttons, with a soft, dry cloth. Avoid using liquids.
- Limited range:
- Ensure there are no obstructions between the remote and the TV.
- Replace the batteries.
6. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 8 x 2 x 0.5 inches |
| Item Weight | 3.2 ounces |
| Compatible Devices | Television |
| Connectivity Technology | Infrared |
| Special Feature | Ergonomic |
| Max Number of Supported Devices | 1 |
| Manufacturer | ELEMENT |
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.
- Battery Care: If the remote control will not be used for an extended period (e.g., one month or more), remove the batteries to prevent leakage and potential damage to the remote.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
8. Warranty and Support
This ELEMENT ELEFT326 TV Remote Control is offered as a renewed product. Renewed products are typically inspected and tested to work and look like new. For specific warranty information and support regarding your renewed product, please refer to the details provided by the seller or the Amazon Renewed Guarantee policy at the time of purchase.
If you experience any issues not covered in the troubleshooting section, please contact the seller or Amazon Renewed customer support for assistance.
