Golden Lighting Dixon Mini Pendant Instruction Manual

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Golden Lighting Dixon Mini Pendant. Please read this manual thoroughly before beginning installation and retain it for future reference. The Dixon Mini Pendant features a mid-century modern design with customizable elements, including clear glass and black hardware, designed to be hung individually or grouped.

Safety Information

WARNING: To reduce the risk of fire, electric shock, or personal injury, always follow these safety precautions:

• Always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
• Installation must be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
• Ensure the fixture is properly grounded.
• Do not connect this fixture to an ungrounded electrical system.
• Use only the type and wattage of bulb specified for this fixture. (E26 bulb base, Incandescent light source type, 600 lumen brightness, warm white light color).
• Do not exceed the maximum wattage indicated on the fixture.
• Handle glass components with care.
• This product operates at 120 volts.
• Please check your local laws and electrical codes before purchasing and installing this product.

Package Contents

Verify that all components are present before beginning installation:

• Light fixture
• Mounting hardware
• Glass shade (Clear Glass)
• Rod-hung pendant components

Image: The Golden Lighting Dixon Mini Pendant, featuring a matte black canopy and rod, leading down to a black metal cap and a clear spherical glass shade. An incandescent bulb is visible inside the clear glass.

Setup and Installation

Assembly is required for this fixture. Follow these general steps for installation. Consult a qualified electrician if you are unsure about any part of the process.

1. Prepare for Installation:
   • Turn off power at the circuit breaker or fuse box.
   • Ensure the mounting surface is clean, dry, and structurally sound.
2. Mounting the Fixture:
   • Attach the mounting bracket to the junction box in the ceiling using the provided hardware.
   • Assemble the rod sections to achieve the desired hanging height.
3. Electrical Connections:
   • Connect the fixture's black wire to the house's black (hot) wire.
   • Connect the fixture's white wire to the house's white (neutral) wire.
   • Connect the fixture's ground wire to the house's ground wire (bare copper or green).
   • Secure all connections with wire nuts and wrap with electrical tape.
4. Securing the Canopy:
   • Carefully push the canopy up against the ceiling, covering the junction box.
   • Secure the canopy to the mounting bracket using the provided screws.
5. Installing the Glass Shade and Bulb:
   • Carefully attach the clear glass shade to the fixture body.
   • Install an E26 base incandescent bulb (max 600 lumens, warm white recommended) into the socket.
6. Final Steps:
   • Restore power at the circuit breaker.
   • Test the fixture to ensure proper operation.

Operation

The Golden Lighting Dixon Mini Pendant is designed for simple operation. Once installed and powered, the light can be controlled via a standard wall switch. The fixture features a pull chain switch for direct control, allowing you to turn the light on or off as needed.

• Turning On/Off: Use the pull chain located on the fixture or the wall switch connected to the circuit.
• Bulb Type: This fixture uses an E26 base incandescent bulb. Ensure the bulb's wattage and brightness do not exceed the fixture's specifications.

Maintenance

Regular maintenance will help preserve the appearance and functionality of your pendant light.

• Cleaning:
  • Always turn off power and allow the fixture to cool before cleaning.
  • Wipe the metal parts with a soft, dry cloth.
  • Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners that may scratch the finish.
• Bulb Replacement:
  • Ensure power is off and the bulb has cooled.
  • Unscrew the old bulb and screw in a new E26 base incandescent bulb of the correct wattage.
• Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.

Troubleshooting

If your pendant light is not functioning correctly, refer to the following common issues and solutions:

If the problem persists after attempting these solutions, contact a qualified electrician or Golden Lighting customer support.

Specifications

Warranty Information

This Golden Lighting Dixon Mini Pendant is covered by a 1 year manufacturer limited warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and claims, please contact Golden Lighting customer support.

Customer Support

For technical assistance, replacement parts, or any questions regarding your Golden Lighting product, please contact the manufacturer directly.

Manufacturer: Golden Lighting

Please refer to the Golden Lighting official website or product packaging for the most current contact information.