Introduction
Pilot Flexi is an in-car holder designed for smartphones and mobile devices. It features a super-grip suction cup for secure fastening to the windscreen, ensuring maximum stability. The extra-long 18 cm flexible arm allows for optimal positioning, keeping your phone visible without obstructing your view. Its servo-assisted tabs securely hold your device without blocking essential ports or buttons.
Image: The Pilot Flexi smartphone holder, featuring a flexible arm and suction cup mount.
Product Features
- Ultra flexible 18cm arm for versatile positioning.
- Ultra adherent windshield suction cup for strong and reliable grip.
- Servo-assisted tabs for secure device fastening.
- Designed to keep your phone visible without blocking your view.
- Suitable for smartphones ranging from 60mm to 95mm in width (approximately 4" to 6.5" screen size).
- 360-degree rotation for optimal viewing angles.
Setup Instructions
- Choose a Mounting Location: Select a clean, smooth, and flat surface on your car's windshield. Ensure the chosen spot does not obstruct your view of the road or interfere with airbags.
- Clean the Surface: Before attaching the suction cup, thoroughly clean the chosen area on the windshield with a glass cleaner and a lint-free cloth. Allow it to dry completely. A clean surface is crucial for maximum adhesion.
- Attach the Suction Cup:
Image: Illustration of the suction cup lever in 'OPEN' and 'CLOSED' positions for secure attachment.
- Ensure the suction cup lever is in the "OPEN" position.
- Press the suction cup firmly against the cleaned windshield surface.
- While maintaining pressure, push the lever down to the "CLOSED" position. This will create a strong vacuum seal.
- Adjust the Flexible Arm: Bend the flexible arm to position the smartphone holder at your desired height and distance for optimal viewing.
Image: The flexible arm can be bent and adjusted to various positions for optimal viewing.
- Insert Your Smartphone: Gently pull apart the servo-assisted tabs of the holder and place your smartphone inside. The tabs will automatically adjust to securely grip your device. Ensure your phone is centered and stable.
Image: A smartphone securely held by the 3-point support system of the Pilot Flexi holder.
Operating Instructions
Once the Pilot Flexi holder is securely mounted and your smartphone is inserted, you can make further adjustments for optimal use:
- Adjust Viewing Angle: The holder features a ball joint connection to the flexible arm, allowing for 360-degree rotation. Gently rotate your smartphone to achieve the perfect horizontal or vertical viewing angle.
Image: The smartphone holder demonstrating its 360-degree rotation capability for various viewing angles.
- Re-positioning: If you need to change the overall position of the holder, gently bend the flexible arm to re-orient the phone. Avoid excessive force or sudden movements.
- Removing Your Smartphone: To remove your smartphone, gently pull apart the servo-assisted tabs and lift your device out.
Maintenance
Proper maintenance will ensure the longevity and optimal performance of your Pilot Flexi holder:
- Cleaning the Suction Cup: If the suction cup loses its grip, it may be due to dust or debris. Wash the suction cup with warm water and mild soap, then air dry it completely. Do not wipe with a cloth as this can leave lint.
- General Cleaning: Wipe the holder and flexible arm with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the materials.
- Storage: When not in use for extended periods, it is recommended to detach the holder from the windshield and store it in a cool, dry place away from direct sunlight.
- Avoid Extreme Temperatures: Prolonged exposure to extreme hot or cold temperatures can affect the material integrity and suction performance.
Troubleshooting
If you encounter any issues with your Pilot Flexi holder, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Suction cup does not stick or falls off. |
|
|
| Smartphone is not held securely or wobbles. |
|
|
| Flexible arm is difficult to bend or position. |
|
|
Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 5.51 x 6.89 x 2.76 inches |
| Item Weight | 3.53 ounces |
| Item Model Number | PILOTFLEXIK |
| Manufacturer | Cellularline |
| Date First Available | December 21, 2018 |
| Compatible Smartphone Width | 60mm (min) to 95mm (max) |
| Flexible Arm Length | 18 cm (approx. 7.1 inches) |
Image: Diagram showing the compatible smartphone width range (60mm to 95mm) for the holder.
Warranty and Support
For information regarding warranty coverage, technical support, or replacement parts, please refer to the official Cellularline website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Manufacturer: Cellularline
Website: www.cellularline.com (Please note: This is a generic placeholder URL. Refer to product packaging or official brand information for the exact support website.)
