ASAKUKI 100-DF002

Download PDF
Contents

ASAKUKI 300ML Essential Oil Diffuser User Manual

Model: 100-DF002

1. Introduction

The ASAKUKI 300ML Essential Oil Diffuser is a versatile 5-in-1 aromatherapy device designed to enhance your home or office environment. It functions as an essential oil diffuser, humidifier, and features 7 different LED light colors, multiple mist nebulizer modes, and an auto-off safety switch for peace of mind.

ASAKUKI 300ML Essential Oil Diffuser, light brown base with white top
The ASAKUKI 300ML Essential Oil Diffuser, featuring a sleek design with a light brown wood-grain base and a white cylindrical top.

2. Important Safety Information

  • Unplug the diffuser during filling and cleaning to prevent electrical hazards.
  • Refer to product bullet points and description for general usage guidance.
  • Ensure the diffuser is placed on a stable, flat surface to prevent spills.
  • Do not exceed the maximum water fill line to avoid malfunction.
  • Keep out of reach of children and pets.

3. Product Components

Your ASAKUKI 300ML Essential Oil Diffuser package includes the following items:

  • ASAKUKI 300ML Essential Oil Diffuser Unit
  • AC Power Adapter
  • User Manual
Diagram showing the diffuser's features including 7 LED mood lights, adjustable brightness, auto color cycles, LED and mist mode working separately, high quality and energy efficient.
Key features of the diffuser, including its LED mood lights and energy efficiency.

4. Setup

  1. Place the diffuser on a flat, stable surface.
  2. Remove the top cover by lifting it straight up.
  3. Connect the AC power adapter to the DC socket on the side of the diffuser.
  4. Fill the water tank with clean tap water up to the maximum fill line (300ml capacity). Do not overfill.
  5. Add 3-5 drops of your preferred essential oil directly into the water tank. Adjust quantity based on desired aroma intensity.
  6. Replace the top cover, ensuring it is securely seated.
  7. Plug the AC power adapter into a wall outlet.
A hand pouring water into the open top of the ASAKUKI diffuser.
Filling the diffuser with water. Ensure not to exceed the maximum fill line.

5. Operating Instructions

Mist Control

Press the 'MIST' button to turn on the mist. Each press cycles through the timer settings:

  • 60 minutes: Mist operates for 60 minutes, then automatically shuts off.
  • 180 minutes: Mist operates for 180 minutes, then automatically shuts off.
  • 360 minutes: Mist operates for 360 minutes, then automatically shuts off.
  • ON: Mist operates continuously until the water runs out.

To turn off the mist, cycle through all timer settings until the mist indicator light is off.

The ASAKUKI diffuser showing its control buttons for Light and Mist, with indicators for 60, 180, 360 minutes, and ON mode.
Control buttons for mist timer settings and light functions.

Light Control

Press the 'LIGHT' button to turn on the LED light. The light will cycle through 7 different colors automatically. Pressing the button again will fix the light on the current color. Continue pressing to cycle through each color individually.

To adjust the brightness of a fixed color, press and hold the 'LIGHT' button. To turn off the light, cycle through all colors until the light turns off.

Auto-Off Safety Switch

The diffuser is equipped with a safety auto-off switch that automatically turns the unit off when the water level is too low or runs out, preventing overheating and ensuring safe operation.

6. Maintenance

Regular cleaning of your diffuser is essential for optimal performance and longevity.

  1. Unplug the diffuser from the power outlet.
  2. Remove the top cover and carefully drain any remaining water from the tank, ensuring water does not enter the air outlet side.
  3. Wipe the inside of the water tank with a soft cloth or sponge. For stubborn residue, use a cotton swab dipped in white vinegar to gently clean the ultrasonic vibrating plate (the small disc at the bottom of the tank).
  4. Rinse the tank with clean water.
  5. Wipe the exterior of the diffuser with a soft, dry cloth.
  6. It is recommended to change the water every three days to maintain hygiene and prevent buildup.

7. Troubleshooting

ProblemPossible CauseSolution
No mist or low mist outputInsufficient water; Water level too high; Ultrasonic plate dirty; Fan blocked.Add water to appropriate level; Drain excess water; Clean ultrasonic plate; Check for obstructions.
No power/lightPower adapter not connected; No power from outlet; Unit not turned on.Ensure adapter is securely plugged in; Test outlet with another device; Press 'MIST' or 'LIGHT' button.
Unusual noiseWater level too low; Unit not on a flat surface.Add water; Place diffuser on a stable, flat surface.

If problems persist after attempting these solutions, please contact customer support.

8. Specifications

FeatureDetail
BrandASAKUKI
Model Name100-DF002
Capacity300 Milliliters
RuntimeUp to 10 hours (weak mist)
Coverage Area250 Square Feet
Power SourceAC Power Adapter (7 watts)
LED Light Colors7 different colors
MaterialPolypropylene (PP), BPA Free
Product Dimensions4.33"L x 4.33"W x 6.03"H
Auto ShutoffYes (when water runs out)
The ASAKUKI diffuser with measurements indicating 300ml capacity, 0.65lb weight, 6.03 inches height, and 4.33 inches width.
Physical dimensions and capacity of the diffuser.

9. Warranty and Support

ASAKUKI offers a 1-year technical support for this essential oil diffuser. For any inquiries or assistance, please refer to the contact information provided with your product packaging or visit the official ASAKUKI store.

Visit the ASAKUKI Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.