TigerDad Adjustable Over Bed Table with Wheels

Introduction

Welcome to your new TigerDad Adjustable Over Bed Table. This manual provides essential information for assembly, operation, and maintenance to ensure safe and efficient use of your product. Please read all instructions carefully before use and retain this manual for future reference.

Important Safety Instructions

• Do not exceed the maximum weight capacity of 22 lbs (10 kg) on the tabletop.
• Ensure all screws and adjustment knobs are securely tightened before placing items on the table or moving it.
• Always lock the casters when the table is in a stationary position to prevent accidental movement.
• Use the table on a flat, stable surface. Avoid uneven floors or inclines.
• Keep small parts and packaging materials away from children to prevent choking hazards.
• Avoid placing hot items directly on the tabletop without protective coasters.
• Do not stand or sit on the table.

Package Contents

Please verify that all the following components are included in your package before beginning assembly:

• Main Tabletop (1 pc)
• Side Tabletop (1 pc)
• Base Frame (1 pc)
• Vertical Support Pole (1 pc)
• Casters with Locks (4 pcs)
• Safety Edge Stopper (1 pc)
• Assembly Hardware (screws, washers, nuts)
• Assembly Tools (Allen key, wrench)
• Instruction Manual (this document)

Assembly Instructions

Follow these steps carefully to assemble your TigerDad Over Bed Table. All necessary tools are included.

1. Attach Casters to Base: Insert the four casters into the designated holes on the base frame. Ensure they are securely fitted.
2. Assemble Base Frame: Connect the two parts of the base frame using the provided screws and tools.
3. Secure Vertical Support Pole: Attach the vertical support pole to the assembled base frame using the provided hardware.
4. Attach Tabletop Sections: Mount the main tabletop and the smaller side tabletop to the top of the vertical support pole. Ensure the tilting mechanism is correctly aligned.
5. Install Safety Edge Stopper: Secure the safety edge stopper to the front edge of the main tilting tabletop.
6. Final Tightening: Double-check all screws, bolts, and adjustment knobs to ensure they are firmly tightened for stability.

This image highlights key features: the safety edge stopper to prevent items from sliding, the height adjustment knob for customizable height, and the lockable casters for mobility and stability.

This diagram illustrates the table's dimensions: main table 18.5x15.7 inches, mouse pad table 9.1x15.7 inches, and adjustable height from 23.6 to 37.4 inches.

Operating Instructions

Height Adjustment

To adjust the table's height, locate the height adjustment knob on the vertical support pole. Turn the knob counter-clockwise to loosen it. Carefully raise or lower the tabletop to your desired height (ranging from 23.6 to 37.4 inches). Once the desired height is reached, turn the knob clockwise firmly to secure the table in position.

Tilting Desktop

The main tabletop features a tilting mechanism for ergonomic use. Loosen the two tilt adjustment knobs located beneath the main tabletop. Adjust the tabletop to your preferred angle. The safety edge stopper at the bottom of the tilting section will prevent your laptop or other items from sliding off. Once the desired angle is set, tighten both knobs firmly to lock the tabletop in place.

This image demonstrates the table's versatility, showing how the main desktop can tilt 360 degrees and the entire table's height can be adjusted for ergonomic use.

Mobility and Stability

Your table is equipped with four 1.5-inch omni-directional casters for easy movement. To move the table, ensure the caster locks are disengaged. To stabilize the table and prevent unwanted movement, press down on the locking levers on the casters to engage the brakes.

This image shows the table in a living room setting, serving as a convenient side table for a laptop and mouse while seated on a sofa.

This image illustrates the table's primary function, allowing a user to comfortably use a laptop or perform other activities while in bed.

Maintenance

Care and Cleaning

• Wipe the tabletop and metal frame with a soft, damp cloth.
• Avoid using harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish.
• Periodically check all fasteners and adjustment knobs to ensure they remain tight. Re-tighten if necessary.
• Keep the table dry and away from excessive moisture.

Troubleshooting

Common Issues and Solutions

• Table is wobbly: Ensure all assembly screws and adjustment knobs are securely tightened. Check that the casters are properly installed and locked when stationary.
• Tabletop does not tilt or adjust smoothly: Loosen the adjustment knobs sufficiently before attempting to change position. Ensure no obstructions are present in the tilting mechanism.
• Casters do not roll smoothly: Check for any debris (hair, lint, etc.) caught in the wheels. Ensure the caster locks are fully disengaged.

Specifications

Warranty and Customer Support

For warranty details, product registration, or technical assistance, please refer to the information provided on your product packaging or contact TigerDad customer service directly. Please retain your purchase receipt as proof of purchase for any warranty claims.