1. Product Overview
The Jinvoo WiFi Wall Light Touch Panel Switch offers modern control over your lighting. This smart switch features a touch-sensitive glass panel, allowing for manual operation. It integrates with your home Wi-Fi network, enabling remote control via a smartphone application and voice commands through compatible smart home assistants like Amazon Echo and Google Home. The switch is designed for AC 120V electrical systems and does not require a separate hub for operation.
Image 1.1: Front view of two Jinvoo WiFi Wall Light Touch Panel Switches, showcasing their sleek design.
Image 1.2: The Jinvoo Smart Switch highlighting its compatibility with Google Assistant, Wi-Fi, and Amazon Alexa.
2. Safety Information
- WARNING: Risk of Electric Shock. Installation should only be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.
- Disconnect power at the circuit breaker before installation.
- Ensure the switch is rated for your electrical system (AC 120V).
- A neutral wire is required for the proper operation of this switch. If your existing switch box does not have a neutral wire, consult a qualified electrician.
- Do not exceed the maximum load rating of 10 Amps.
- Keep children away from electrical components during installation.
3. Package Contents
- Jinvoo WiFi Wall Light Touch Panel Switch
- Mounting Screws
- User Manual
4. Specifications
| Brand | Jinvoo |
| Model Number | SM-SW102-3 W2 |
| Operating Voltage | 120 Volts (AC) |
| Current Rating | 10 Amps |
| Operation Mode | ON-OFF-ON |
| Switch Type | Push Button (Touch Panel) |
| Material | Acrylonitrile Butadiene Styrene |
| Product Dimensions | 0.04 x 0.04 x 0.04 inches; 14.22 ounces |
5. Installation
Important: Ensure power is disconnected at the circuit breaker before beginning installation. If you are unsure about electrical wiring, consult a qualified electrician.
- Turn Off Power: Locate your circuit breaker and turn off the power to the light switch you are replacing. Verify power is off using a voltage tester.
- Remove Old Switch: Carefully remove the faceplate and unscrew the old switch from the wall box. Disconnect the wires.
- Identify Wires: Identify the Line (Live), Load, Neutral, and Ground wires. This smart switch requires a neutral wire.
- Wire the New Switch: Connect the wires to the corresponding terminals on the Jinvoo smart switch. Refer to the wiring diagram below for guidance.
- L: Connect to the Line (Live) wire.
- L1/L2/L3: Connect to the Load wires (to your lights).
- N: Connect to the Neutral wire.
- GND: Connect to the Ground wire.
- Mount the Switch: Gently push the wired switch into the wall box and secure it with the provided screws. Attach the glass touch panel faceplate.
- Restore Power: Turn the power back on at the circuit breaker. The indicator light on the switch should illuminate.
Image 5.1: Overview of the installation process, including app download and network connection.
Video 5.2: A 38-second video demonstrating the physical aspects and connections of the Jinvoo SW102 2-pack light switch.
6. Setup and App Pairing
To enable smart features, you need to connect your Jinvoo switch to the Jinvoo Smart app and your home Wi-Fi network.
- Download the App: Search for "Jinvoo Smart" in the Apple App Store or Google Play Store and download the application.
- Register/Log In: Open the app and register a new account or log in with an existing one.
- Enter Pairing Mode: After installation, the switch's indicator light should be blinking rapidly. If not, press and hold one of the touch buttons for 5-10 seconds until it blinks rapidly. This indicates pairing mode.
- Add Device in App: In the Jinvoo Smart app, tap the "+" icon or "Add Device." Select "Electrical Switch" or the appropriate device type.
- Connect to Wi-Fi: Follow the in-app instructions to connect the switch to your 2.4 GHz Wi-Fi network. Ensure your phone is also connected to the same 2.4 GHz network during setup. (Note: 5 GHz Wi-Fi networks are not supported.)
- Rename Device: Once successfully paired, you can rename the switch for easier identification (e.g., "Living Room Light").
Image 6.1: The Jinvoo Smart app interface displaying options for remote control and scheduling.
7. Operating Instructions
7.1. Manual Touch Control
Simply touch the corresponding circular icon on the glass panel to turn the connected light(s) ON or OFF. The backlight will indicate the switch status.
7.2. Remote Control via Jinvoo Smart App
Open the Jinvoo Smart app on your smartphone. Select the desired switch from your device list. You can then tap the ON/OFF button within the app to control your lights from anywhere with an internet connection.
Image 7.1: A user remotely controlling home lighting using the Jinvoo Smart app on their smartphone.
7.3. Voice Control (Amazon Alexa / Google Home)
To use voice control, you must first link your Jinvoo Smart account to your Amazon Alexa or Google Home app. Follow the instructions provided by Amazon or Google for linking third-party smart home devices. Once linked, you can use commands such as:
- "Alexa, turn on Living Room Light."
- "Hey Google, turn off Bedroom Light."
7.4. Timing Function
The Jinvoo Smart app allows you to set schedules and timers for your lights. This feature can automate your lighting based on your daily routine.
- Open the Jinvoo Smart app and select your switch.
- Navigate to the "Timer" or "Schedule" section.
- Set desired ON/OFF times and days of the week.
- Save the schedule.
Image 7.2: The timing function interface, illustrating how to set automated ON/OFF schedules for lights.
Image 7.3: Visual representation of the timing function, suggesting automated lighting for convenience.
8. Maintenance
To maintain the appearance and functionality of your Jinvoo smart switch:
- Clean the glass panel with a soft, dry, or slightly damp cloth.
- Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface.
- Ensure the switch is dry before operating after cleaning.
9. Troubleshooting
- Switch Not Responding:
- Check if the circuit breaker is ON.
- Verify all wiring connections are secure and correct, especially the neutral wire.
- Ensure the power supply to the switch is stable.
- Cannot Connect to Wi-Fi:
- Confirm your Wi-Fi network is 2.4 GHz. This switch does not support 5 GHz networks.
- Ensure your phone is connected to the same 2.4 GHz Wi-Fi network during pairing.
- Check your Wi-Fi password for accuracy.
- Move the switch closer to your Wi-Fi router to improve signal strength.
- Reset the switch to factory settings (usually by holding a button for an extended period, refer to specific product instructions if different) and try pairing again.
- Voice Control Not Working:
- Ensure your Jinvoo Smart account is correctly linked to your Amazon Alexa or Google Home app.
- Verify the device name in the Jinvoo Smart app matches the name used in voice commands.
- Check your internet connection.
10. Warranty and Support
Jinvoo products are covered by a manufacturer's warranty. For specific warranty details, returns, or technical support, please refer to the documentation included with your product or contact Jinvoo customer service through their official website or the retailer where the product was purchased.
