Passion-Electro VR4722N

Download PDF
Contents

Passion-Electro Replacement Remote Control for Luxor VR4722N VCR

User Manual

1. Introduction

This manual provides instructions for the Passion-Electro Replacement Remote Control, model VR4722N, specifically designed for Luxor VCRs. This specialized remote offers full functionality comparable to the original remote control without requiring any programming. Simply insert the batteries to begin use.

2. Setup

2.1 Installing Batteries

The remote control requires two 1.5V AAA (LR03) batteries (not supplied). Follow these steps to install them:

  1. Locate the battery compartment cover on the back of the remote control.
  2. Slide the cover downwards or press the latch to open it.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
  4. Replace the battery compartment cover by sliding it back into place until it clicks securely.
Bottom view of the remote control showing the battery compartment cover.

This image illustrates the underside of the remote control, focusing on the removable cover for the battery compartment, where two AAA batteries are to be inserted.

3. Operating Instructions

This remote control is designed to replicate the full functionality of your original Luxor VR4722N VCR remote. No programming is required; it is ready for use once batteries are installed.

3.1 Basic Operation

  • Power On/Off: Press the POWER button (usually red) to turn your VCR on or off.
  • Channel Selection: Use the number buttons (0-9) to select channels directly, or the CH+ / CH- buttons to cycle through channels.
  • Volume Control: Adjust volume using the VOL+ / VOL- buttons.
  • Playback Controls: Use PLAY, PAUSE, STOP, REW (Rewind), FF (Fast Forward) buttons for VCR playback functions.
  • Menu Navigation: Press the MENU button to access VCR settings. Use the arrow keys (UP, DOWN, LEFT, RIGHT) and OK button to navigate and confirm selections.
Front view of the Passion-Electro replacement remote control for Luxor VR4722N VCR, showing various function buttons.

This image displays the front face of the remote control, highlighting the layout of the power, channel, volume, and playback buttons, along with the Passion-Electro logo.

4. Maintenance

4.1 Cleaning

To clean the remote control, gently wipe it with a soft, dry cloth. Avoid using liquid cleaners, solvents, or abrasive materials, as these can damage the surface or internal components.

4.2 Battery Replacement

Replace the batteries when the remote's response becomes sluggish or it stops functioning. Always replace both batteries simultaneously with new 1.5V AAA batteries. Do not mix old and new batteries, or different types of batteries.

4.3 Storage

Store the remote control in a dry place, away from direct sunlight, high temperatures, and excessive humidity. If the remote will not be used for an extended period, it is advisable to remove the batteries to prevent leakage.

5. Troubleshooting

5.1 Remote Not Responding

  • Check Battery Polarity: Ensure the batteries are inserted correctly, matching the positive (+) and negative (-) indicators inside the compartment.
  • Replace Batteries: Old or depleted batteries are a common cause. Replace them with fresh 1.5V AAA batteries.
  • Remove Obstructions: Ensure there are no objects blocking the line of sight between the remote control and your VCR's infrared sensor.
  • Point Correctly: Confirm the remote is pointed directly at the VCR.

5.2 Limited Range

  • Fresh Batteries: Ensure batteries are fresh, as low power can reduce the remote's effective range.
  • Clear Signal Path: Remove any objects that might be interfering with the infrared signal between the remote and the VCR.

6. Specifications

ModelVR4722N
BrandPassion-Electro
Battery Type2 x AAA (LR03) 1.5V (not included)
CompatibilityLuxor VCRs (specifically VR4722N)
ASINB07L9HX1RV
First AvailableDecember 11, 2018

7. Warranty and Support

7.1 Manufacturer Warranty

This Passion-Electro replacement remote control comes with a 2-year manufacturer warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

7.2 Customer Support

For technical assistance, warranty claims, or any questions regarding your remote control, please contact your retailer or the manufacturer, Passion-Electro, directly. Please have your purchase information and product model (VR4722N) available when contacting support.

© 2024 Passion-Electro. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.