1. Product Overview
The Puig Front Fender Extender 9824N is designed to provide additional protection for your motorcycle's front end and the rider. Manufactured from durable ABS material, this extender helps to reduce spray and debris from the front wheel, keeping your motorcycle cleaner and protecting components from road grime.
This product is specifically compatible with the following Honda X-ADV models:
- Honda X-ADV 2017
- Honda X-ADV 2018
- Honda X-ADV 2019
- Honda X-ADV 2020
The extender is supplied with adhesive for temporary positioning and plastic rivets for a secure, permanent installation.
2. Package Contents
- 1x Puig Front Fender Extender (Model 9824N)
- Adhesive strips for temporary fixation
- Plastic rivets for permanent installation
- Installation instructions (this manual)
3. Setup and Installation
Installation of the Puig Front Fender Extender is designed to be straightforward. Please follow these steps carefully to ensure a secure fit.
- Prepare the Surface: Ensure the surface of your motorcycle's original front fender is clean, dry, and free from grease or wax. Use a suitable cleaner if necessary.
- Test Fit: Carefully position the Puig Front Fender Extender against your motorcycle's original front fender to determine the optimal alignment.
- Apply Adhesive: Remove the backing from the adhesive strips on the fender extender. Align the extender precisely and press it firmly onto the original fender. The adhesive provides temporary fixation to hold the extender in place during the next step.
- Secure with Rivets: Once the extender is temporarily fixed with adhesive, use the provided plastic rivets to permanently secure it. Drill small pilot holes through the extender and the original fender where indicated or where the rivets will provide the most secure attachment. Insert the plastic rivets and ensure they are fully seated.
- Final Check: Verify that the fender extender is securely attached and does not interfere with any moving parts of the motorcycle, such as the wheel or suspension.
Image 1: The Puig Front Fender Extender (black) shown installed on the front fender of a motorcycle, providing extended coverage. The motorcycle's front wheel, brake caliper, and suspension forks are visible.
Image 2: A closer view of the Puig Front Fender Extender attached to the motorcycle's front fender. This image highlights the seamless integration and the additional length provided by the extender.
4. Operating Instructions
The Puig Front Fender Extender operates passively by extending the coverage of your motorcycle's existing front fender. Once installed, no further user interaction is required. Its primary function is to deflect water, mud, and road debris more effectively, thereby protecting the engine, radiator, and other front-end components from splashes and impacts, and keeping the rider cleaner.
5. Maintenance
To ensure the longevity and appearance of your Puig Front Fender Extender, follow these simple maintenance guidelines:
- Cleaning: Clean the fender extender regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the ABS material or its finish.
- Inspection: Periodically check the attachment points (rivets and adhesive) to ensure they remain secure. If any looseness is detected, re-secure the extender as necessary.
- Damage: In case of damage to the extender, consider replacing it to maintain optimal protection and aesthetic appeal.
6. Troubleshooting
If you encounter any issues with your Puig Front Fender Extender, refer to the following common problems and solutions:
- Extender feels loose after installation:
- Ensure all plastic rivets are fully inserted and secure.
- Verify that the adhesive strips made proper contact with a clean, dry surface during installation. If not, the extender may need to be re-installed with new adhesive.
- Extender does not fit correctly:
- Double-check the product compatibility with your specific Honda X-ADV model year (2017-2020).
- Ensure the extender is oriented correctly before attempting permanent fixation.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 9824N |
| Brand | Puig |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Color | Black |
| Dimensions (L x W x H) | 30.5 x 17.8 x 10.2 cm (12 x 7 x 4 inches) |
| Item Weight | 82 Grams (0.18 lbs) |
| Vehicle Service Type | Motorcycle |
| Part Position | Front |
| Compatible Vehicle Models | Honda X-ADV (2017, 2018, 2019, 2020) |
| ASIN | B07L9HM3WL |
8. Warranty and Support
Specific warranty information for the Puig Front Fender Extender 9824N is not provided in this manual. Please refer to the retailer or manufacturer's official website for details regarding warranty coverage and customer support.
For further assistance or inquiries, please contact Puig customer service through their official channels.
