SEAC Sporty Water Resistant Watch 100M Instruction Manual

1. Introduction

Thank you for choosing the SEAC Sporty Water Resistant Watch. This watch is designed for reliability and durability, featuring a robust stainless steel case and a comfortable rubber strap. It is suitable for various water sports and activities, with a water resistance rating of up to 100 meters.

Image 1.1: Front view of the SEAC Sporty watch, showcasing its blue strap and black analog dial.

2. Setup

2.1 Battery Installation (Pre-installed)

The SEAC Sporty watch comes with one C-type battery pre-installed. The watch should be operational upon receipt. If the watch is not running, please refer to the Troubleshooting section.

2.2 Setting the Time

1. Pull out the crown: Gently pull the crown (the small knob on the side of the watch case) outwards until you hear a click.
2. Adjust the time: Rotate the crown clockwise or counter-clockwise to move the hour and minute hands to the correct time.
3. Push in the crown: Once the time is set, push the crown back into its original position. Ensure it is fully pushed in to maintain water resistance.

Image 2.1: Close-up of the watch face, showing the crown for time adjustment.

3. Operating Instructions

The SEAC Sporty watch is an analog quartz timepiece designed for simplicity and reliability. Its primary function is to display the current time.

• Time Display: The watch features an analog display with hour, minute, and second hands.
• Water Resistance: This watch is water resistant up to 100 meters (330 feet). It is suitable for swimming, snorkeling, and recreational diving. Do not operate the crown or push buttons while the watch is wet or submerged to prevent water ingress.
• Movement: Powered by a reliable quartz movement, ensuring accurate timekeeping.

4. Maintenance

4.1 Cleaning

To clean your watch, wipe it with a soft, damp cloth. For rubber straps, mild soap and water can be used. Rinse thoroughly with fresh water after exposure to saltwater or chlorine, and dry completely with a soft cloth.

4.2 Battery Replacement

When the watch stops running, the battery needs to be replaced. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is properly maintained.

Image 4.1: Rear view of the watch, indicating the stainless steel case back where battery replacement would occur.

4.3 Water Resistance Care

Regularly check the crown and case back for any signs of damage. Avoid exposing the watch to extreme temperature changes, as this can affect the water resistance seals. It is advisable to have the water resistance seals checked annually by a professional, especially if frequently used in water.

5. Troubleshooting

• Watch not running:
  • Ensure the crown is fully pushed in.
  • The battery may be depleted. Contact a qualified technician for battery replacement.
• Condensation inside the watch:
  • This indicates a loss of water resistance. Immediately take the watch to a professional for inspection and repair to prevent further damage.
• Inaccurate timekeeping:
  • The battery may be low.
  • The watch may have been exposed to strong magnetic fields.
  • Contact customer support or a watch repair specialist.

6. Specifications

7. Warranty and Support

The SEAC Sporty watch comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers manufacturing defects under normal use.

For warranty claims, technical support, or service inquiries, please contact SEAC customer service through their official website or the retailer where the product was purchased. Please retain your proof of purchase for warranty validation.

Manufacturer: SEAC

For more information, visit the official SEAC store: SEAC Store on Amazon