Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Luceco EFLD50W40-01 Slimline LED Floodlight. This 50W, 4000 lumen, 4000K neutral white LED floodlight features an IP65 rating, making it suitable for various outdoor applications.
Key Features:
- Suitable for various residential lighting applications.
- Durable die-cast aluminum housing.
- Adjustable tilt bracket for flexible positioning.
- IP65 rated for outdoor use.
- 4000 lumens output with 4000K neutral white light.
Image: The Luceco EFLD50W40-01 Slimline LED Floodlight, shown in its off state, highlighting its compact design and white finish.
Image: The Luceco EFLD50W40-01 Slimline LED Floodlight, illuminated, demonstrating its bright light output.
Safety Information
- Always disconnect power before installation or servicing.
- Installation should be performed by a qualified electrician in accordance with local wiring regulations.
- Ensure the mounting surface is strong enough to support the floodlight.
- Do not look directly into the LED light source when illuminated.
- Keep away from flammable materials.
Setup and Installation
- Preparation: Ensure the power supply is switched off at the main circuit breaker before commencing installation. Gather necessary tools (screwdriver, drill, wire strippers, etc.).
- Mounting Location: Select a suitable mounting location that can support the weight of the floodlight and provides the desired illumination coverage. The floodlight is IP65 rated, suitable for outdoor use.
- Secure the Bracket: Use appropriate screws and wall plugs (not supplied) to securely fasten the adjustable tilt bracket to the mounting surface. Ensure the bracket is level and firmly attached.
- Wiring: Connect the floodlight's electrical cable to your main power supply. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. Use a suitable waterproof junction box if connecting outdoors. The floodlight comes with a pre-wired 0.3m H05RN-F cable.
- Adjust Angle: Once securely mounted and wired, adjust the floodlight's angle using the tilt bracket to direct the light as required. Tighten the bracket screws to fix the position.
- Power On: Restore power to the circuit. The floodlight should illuminate.
Image: The Luceco Slimline LED Floodlight installed on the exterior of a house, providing illumination to the surrounding area at night.
Operating Instructions
The Luceco EFLD50W40-01 Slimline LED Floodlight operates by direct connection to a mains power supply (AC). There are no complex controls or settings for this model.
- Power On/Off: Control the floodlight's operation using the wall switch or circuit breaker connected to its power supply.
- Light Output: The floodlight provides a consistent 4000 lumens of 4000K neutral white light when powered on.
Maintenance
The Luceco Slimline LED Floodlight is designed for low maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Cleaning: Periodically clean the floodlight's surface and lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or lens.
- Inspection: Regularly inspect the floodlight for any signs of damage, loose connections, or wear. Ensure the mounting bracket remains secure.
- No User-Serviceable Parts: The LED light source is integrated and not user-replaceable. Do not attempt to open the floodlight housing, as this will void the warranty and may expose you to electrical hazards.
Troubleshooting
If you encounter issues with your floodlight, refer to the following common troubleshooting steps:
- Light Not Turning On:
- Check if the power supply is connected and switched on.
- Verify that the circuit breaker has not tripped.
- Inspect wiring connections for looseness or damage (only if qualified to do so, with power off).
- Flickering Light:
- Ensure all electrical connections are secure.
- Check for voltage fluctuations in your power supply.
- Reduced Brightness:
- Clean the lens surface to remove any dirt or debris.
If the problem persists after following these steps, please contact Luceco customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Luceco |
| Model Number | EFLD50W40-01 |
| Manufacturer | Luceco |
| Product Dimensions | 5.5 x 21.5 x 21.5 cm |
| Weight | 1.1 kg |
| Style | Traditional |
| Color | White |
| Material | Aluminum |
| Number of Light Sources | 1 |
| Special Feature | Energy Efficiency |
| Shade Material | Aluminum |
| Power Source | AC |
| Wattage | 50 Watts |
| Luminous Flux | 4000 Lumens |
| Color Temperature | 4000K (Neutral White) |
| IP Rating | IP65 |
| L70 Life Hours | 25,000 Hours |
| Beam Angle | 110° |
Note: Specifications are subject to change without notice.
Image: A detailed table outlining the product specifications for various Luceco Slimline LED Floodlight models, including the EFLD50W40-01.
Warranty
This Luceco EFLD50W40-01 Slimline LED Floodlight comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
The warranty does not cover damage caused by improper installation, misuse, abuse, or unauthorized modifications.
Support and Contact Information
For further assistance, technical support, or warranty inquiries, please contact Luceco customer service.
Please visit the official Luceco website for the most up-to-date contact details and support resources.
Luceco is a registered trademark.
Image: The official Luceco company logo.
