VIVO STAND-V101G1
VIVO Premium Aluminum Heavy Duty Monitor Arm
Model: STAND-V101G1
Brand: VIVO
1. Introduction
The VIVO Premium Aluminum Heavy Duty Monitor Arm (Model STAND-V101G1) is engineered to provide a robust and flexible mounting solution for your display. This arm supports ultrawide monitors up to 49 inches and standard flat/curved monitors up to 32 inches, with a weight capacity of up to 33 lbs. Its pneumatic height adjustment, tilt, swivel, and rotation capabilities allow for optimal ergonomic positioning, enhancing comfort and productivity. This manual will guide you through the installation, operation, and maintenance of your monitor arm.
2. Safety Information
Please read and understand all instructions before use. Failure to follow these instructions may result in property damage, serious injury, or death.
- Weight Capacity: Do not exceed the maximum weight capacity of 33 lbs (15 kg). Overloading may cause instability, resulting in possible injury.
- VESA Compatibility: Ensure your monitor has VESA mounting holes (75x75mm or 100x100mm). If your monitor does not have VESA holes, a separate adapter (not included) will be required.
- Pinch Points: Be aware of pinch points during assembly and adjustment. Keep hands and fingers clear of moving parts.
- Secure Installation: Ensure the desk clamp or grommet mount is securely fastened to a stable desk surface before attaching the monitor.
- Monitor Stability: After installation, gently test the arm's stability and adjust tension as needed to ensure the monitor remains in its desired position.
3. Package Contents
Verify that all components are present and in good condition before beginning assembly. If any parts are missing or damaged, please contact VIVO customer support.
- Monitor Arm Assembly
- Desk Clamp Base
- Grommet Mount Base
- VESA Plate
- Hardware Kit (screws, washers, spacers)
- Tools (Allen wrenches)
4. Setup
4.1 Choose Your Mounting Option
The monitor arm offers two installation methods: Desk Clamp or Grommet Mount.

This diagram details the arm's weight capacity (2.2-33 lbs), VESA compatibility (75x75mm, 100x100mm), integrated cable management, and desk thickness requirements for both clamp (0.4-3.3 inches) and grommet (0.4-1.9 inches) installations.

The robust desk clamp provides a secure and stable foundation for the monitor arm, ensuring your display remains firmly in place. It is designed to fit a wide range of desk thicknesses.
4.2 Attach VESA Plate to Monitor
Align the VESA plate with the mounting holes on the back of your monitor. Use the appropriate screws and spacers from the hardware kit to securely fasten the plate. For ultrawide monitors with circular connections, an adapter (not included) may be required.

This image illustrates how the monitor arm connects to the back of your display via the VESA mounting plate. Ensure the plate is securely fastened to your monitor before attaching it to the arm.
4.3 Attach Monitor to Arm
Once the VESA plate is attached to your monitor, slide the monitor onto the quick-release VESA bracket on the arm until it clicks securely into place. Ensure it is fully seated and locked.
4.4 Adjust Tension
The pneumatic spring requires tension adjustment to properly hold your monitor's weight. Use the provided Allen wrench to turn the tension screw on the arm. Turn counter-clockwise for heavier monitors and clockwise for lighter monitors until the arm can hold the monitor in any position without drifting up or down.

The powerful pneumatic arm allows for smooth and effortless height adjustments. Use the tension adjustment screw to fine-tune the arm's resistance based on your monitor's weight: turn counter-clockwise for heavier monitors and clockwise for lighter ones.
5. Operating the Monitor Arm
The VIVO monitor arm offers a wide range of motion for optimal viewing comfort.
5.1 Adjustments
- Height Adjustment: Gently push or pull the monitor up or down to adjust its height. The pneumatic spring will assist in smooth movement.
- Tilt: Tilt the monitor screen -45° to +45° to reduce glare and optimize viewing angles.
- Swivel: Swivel the monitor 180° left or right to share your screen or change viewing direction.
- Rotation: Rotate the monitor 180° to switch between landscape and portrait orientations.

This diagram highlights the arm's versatile adjustability, offering a height range of 10.5 to 23.5 inches, a spring-assisted tilt from -45° to +45°, 180° swivel, and 180° rotation. The maximum extension is 23 inches, providing ample reach.

The monitor arm provides a stable and elevated position for your display, freeing up valuable desk space. The curved monitor demonstrates the arm's compatibility with various screen types.
5.2 Cable Management
The arm features an integrated cable management system to keep your workspace tidy. Route your monitor cables through the designated channels on the arm to conceal them and prevent clutter.

The arm features an integrated cable management system, allowing you to route and conceal monitor cables for a clean and organized desktop setup.
6. Maintenance
To ensure the longevity and optimal performance of your VIVO monitor arm, follow these simple maintenance guidelines:
- Cleaning: Wipe the arm and base with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
- Periodic Checks: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Tension Adjustment: If the monitor begins to sag or becomes difficult to move, re-adjust the pneumatic spring tension as described in Section 4.4.
7. Troubleshooting
If you encounter issues with your monitor arm, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor sags or drifts down | Insufficient pneumatic spring tension for monitor weight. | Increase tension by turning the tension screw counter-clockwise (Section 4.4). |
| Monitor is difficult to move up/down | Too much pneumatic spring tension for monitor weight. | Decrease tension by turning the tension screw clockwise (Section 4.4). |
| Arm feels unstable or wobbly | Desk clamp/grommet mount is not securely tightened. | Ensure the clamp or grommet mount is fully tightened to the desk surface. |
| Monitor does not attach to VESA plate | Incorrect VESA pattern or missing adapter. | Verify monitor's VESA pattern (75x75mm or 100x100mm). Obtain a VESA adapter if needed. |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | STAND-V101G1 |
| Material | Aluminum |
| Color | Black |
| Weight Capacity | 2.2 lbs - 33 lbs (1 kg - 15 kg) |
| Compatible Screen Size | Ultrawide up to 49 inches, Standard up to 32 inches |
| VESA Compatibility | 75x75mm, 100x100mm |
| Height Adjustment Range | 10.5 inches - 23.5 inches (27cm - 60cm) |
| Tilt Angle | -45° to +45° |
| Swivel Angle | 180° |
| Rotation Angle | 180° |
| Max Extension | 23 inches |
| Desk Clamp Thickness | 0.4 inches - 3.3 inches |
| Grommet Mount Thickness | 0.4 inches - 1.9 inches |
| Item Weight | 12.7 pounds |
9. Warranty and Support
VIVO is committed to providing high-quality products and excellent customer service. Your VIVO monitor arm comes with a generous product protection plan. For detailed warranty information, technical support, or to inquire about replacement parts, please visit the official VIVO store or contact their U.S.-based support team.
You can find additional resources, including a User Guide (PDF) and User Manual (PDF), on the product's Amazon page or the VIVO website for more in-depth information.
Related Documents - STAND-V101G1
![]() |
VIVO MOUNT-V101G1/W Pneumatic Arm Ultrawide Monitor Wall Mount Instruction Manual Comprehensive instruction manual for the VIVO MOUNT-V101G1/W Pneumatic Arm Single Ultrawide Monitor Wall Mount. Includes package contents, tools needed, step-by-step assembly instructions for wood and concrete walls, VESA plate attachment, gas spring adjustment, and safety guidelines. |
![]() |
VIVO Pneumatic Arm Single Monitor Desk Mount Assembly Manual This assembly manual provides step-by-step instructions for installing the VIVO Pneumatic Arm Single Monitor Desk Mount, model STAND-V101G1. It includes details on package contents, hardware, tools needed, and assembly procedures for both clamp and grommet mounting options. Learn how to adjust tilt, height, and ensure secure monitor placement. |
![]() |
VIVO Pneumatic Arm Single Ultrawide Monitor Wall Mount - Installation Guide Comprehensive instruction manual for the VIVO MOUNT-V101G1/W Pneumatic Arm Single Ultrawide Monitor Wall Mount, detailing assembly, installation, and adjustment steps for up to 49" monitors. |
![]() |
VIVO Pneumatic Arm Single Ultrawide Monitor Wall Mount Instruction Manual Detailed instruction manual for the VIVO MOUNT-V101G1/W Pneumatic Arm Single Ultrawide Monitor Wall Mount, covering package contents, tools needed, and step-by-step assembly instructions for wood and concrete walls. |
![]() |
VIVO STAND-V100D Pneumatic Arm Single Ultrawide Monitor Desk Mount Instruction Manual Detailed instruction manual for assembling and installing the VIVO STAND-V100D Pneumatic Arm Single Ultrawide Monitor Desk Mount. Includes package contents, tools needed, step-by-step assembly instructions for desk clamp and grommet options, and adjustment guidance. |
![]() |
VIVO Monitor Arm Pneumatic Tension Adjustment Guide This guide provides instructions on how to adjust the pneumatic tension of a VIVO monitor arm to ensure it properly supports your monitor's weight, allowing for smooth vertical movement. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.





