Product Overview
The Dancover Portable Garage Tent offers an affordable and flexible solution for the storage of various items such as cars, tools, garden tractors, bicycles, and trailers. Constructed with a waterproof and UV-resistant polyethylene (PE) tarpaulin, it provides ample standing height and robust protection. The structure includes essential components like ground dowels and anchors for secure installation, ventilation openings for air circulation, two functional doors for easy access, and a floor apron for added stability and protection.
Key features include:
- Affordable and flexible storage solution.
- Ideal for cars, tools, garden tractors, bicycles, trailers, etc.
- Waterproof and UV-resistant tarpaulin.
- Ample standing height for comfortable access.

Safety Information
Please read and understand all safety instructions before assembling and using the portable garage tent. Failure to follow these instructions may result in injury or damage to the product.
- Anchoring: Always ensure the tent is securely anchored to the ground using the provided ground dowels and anchors. In areas prone to strong winds, consider additional anchoring methods.
- Wind and Snow: While designed to be robust, extreme weather conditions like heavy snow loads or very strong winds can damage the structure. Clear snow accumulation promptly from the roof. Consider disassembling the tent during severe weather warnings.
- Site Selection: Choose a level, well-drained site for installation. Avoid placing the tent near power lines, trees, or other structures that could pose a hazard.
- Ventilation: Ensure adequate ventilation, especially if storing items that may emit fumes. The tent includes ventilation openings for this purpose.
- Children and Pets: Keep children and pets away from the assembly area. Do not allow them to play inside or around the tent unsupervised.
Package Contents
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, contact Dancover customer support.
- Galvanized Steel Frame Components
- Polyethylene (PE) Tarpaulin (Roof and Walls)
- Ground Dowels
- Anchors
- Assembly Hardware (bolts, nuts, pins, etc.)
- Instruction Manual
Assembly Instructions
Assembly of the Dancover Portable Garage Tent typically requires two people for ease and safety. Follow the steps below and refer to the included diagrams for visual guidance.
- Prepare the Site: Select a flat, clear area for the tent. Ensure there is enough space around the tent for assembly and future access.
- Unpack Components: Carefully unpack all frame components, the tarpaulin, and hardware. Organize them to ensure easy access during assembly.
- Assemble the Frame: Begin by assembling the galvanized steel frame. Connect the various pipe sections according to the technical drawing. The frame is designed for strength and stability.

Figure 2: Technical drawing illustrating the frame structure and dimensions (3.30m W x 4.80m L x 2.44m H). 
Figure 3: Detail of the robust 32mm galvanized steel frame connection. - Attach the Tarpaulin: Once the frame is complete, carefully drape the polyethylene tarpaulin over the frame. Ensure it is centered and aligned correctly. Secure the tarpaulin to the frame using the provided fasteners and ties.
- Install Doors and Features: Attach the front and rear door panels. The tent features two doors for convenient entry and exit. Ensure the ventilation openings are clear.
- Secure to the Ground: Use the ground dowels and anchors to firmly secure the tent to the ground. The floor apron can be used to further stabilize the structure and prevent wind from getting underneath.

Figure 4: The ground apron and stability features for enhanced anchoring.



Operation
The Dancover Portable Garage Tent is designed for straightforward operation as a temporary or semi-permanent storage solution.
- Access: Utilize the two zippered doors for easy entry and exit of vehicles or other stored items. The doors can be rolled up and secured to remain open.
- Ventilation: The integrated ventilation openings help to reduce condensation and maintain air circulation inside the tent. Ensure these openings are not obstructed.
- Security: While the tent provides shelter, it is not a high-security structure. Always remove valuable items when the tent is unattended.


Care and Maintenance
Regular care and maintenance will extend the lifespan of your Dancover Portable Garage Tent.
- Cleaning the Tarpaulin: Clean the polyethylene tarpaulin periodically with mild soap and water. Avoid harsh chemicals or abrasive cleaners, as these can damage the material. Rinse thoroughly and allow to air dry completely before folding or storing.
- Frame Inspection: Regularly inspect the steel frame for any signs of rust, bending, or loose connections. Tighten any loose bolts or connections as needed.
- Anchoring Check: Periodically check the ground dowels and anchors to ensure they remain firmly secured, especially after strong winds or heavy rain. Re-secure if necessary.
- Snow Removal: In snowy conditions, promptly remove snow accumulation from the roof to prevent excessive weight from damaging the frame.
- Storage: If disassembling for storage, ensure all components are clean and dry. Store the tarpaulin and frame parts in a dry, protected area to prevent mildew and corrosion.
Troubleshooting
This section addresses common issues you might encounter with your Dancover Portable Garage Tent.
- Tent is unstable: Ensure all ground dowels and anchors are fully inserted and secured. Check that the frame connections are tight. Consider adding extra anchoring points in very windy conditions.
- Difficulty with assembly: While assembly is designed to be straightforward, it is highly recommended to have at least two people for the installation process. Refer to the assembly instructions and diagrams carefully.
- Water pooling on roof: Ensure the tarpaulin is taut and evenly distributed over the frame. Check that the frame is assembled correctly and is not sagging in any areas.
- Condensation inside: Ensure the ventilation openings are clear and unobstructed to allow for proper airflow.
Technical Specifications
| Specification | Detail |
|---|---|
| Product Dimensions (L x W x H) | 4.8 m x 3.3 m x 2.44 m (ridge height) |
| Item Weight | 71 Kilograms |
| Material | Polyethylene (PE) Tarpaulin, Galvanized Steel Frame |
| Colour | Grey |
| Manufacturer | Dancover |
| ASIN | B07L6JP6SD |
| First Available Date | 12 December 2018 |
Warranty and Support
For information regarding warranty coverage, returns, or technical support, please contact Dancover customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.
You can typically find support contact information on the Dancover official website or through the retailer from whom you purchased the product.