Easytry123 Easytry4911

Easytry123 Replacement Remote Control User Manual

Model: Easytry4911

1. Introduction

This manual provides instructions for the Easytry123 replacement remote control, model Easytry4911. This remote is designed to function as a replacement for various Sanyo LCD HDTV TV models, including RC-1900, 10062354, CE26LD90DV-B, CE22LC90DVN-C-P, CE19LD90DV-B, 10062392, and CE22LD90DV-B. It offers essential control functions for your television.

Please note that as a replacement item, some advanced or specific functions of your original remote may not be fully supported. The primary purpose of this remote is to provide basic and common television control.

2. Safety Information

  • Keep batteries out of reach of children.
  • Do not mix old and new batteries, or different types of batteries.
  • Remove batteries if the remote control will not be used for an extended period to prevent leakage.
  • Dispose of used batteries according to local regulations.
  • Avoid exposing the remote control to direct sunlight, heat sources, or moisture.

3. Package Contents

  • 1 x Easytry123 Replacement Remote Control (Model: Easytry4911)

Note: Batteries are not included and must be purchased separately. Two AAA batteries are required.

4. Setup: Battery Installation

To begin using your remote control, you must first install two AAA batteries.

  1. Locate the battery compartment cover on the back of the remote control.
  2. Slide the cover downwards or press the latch and lift to remove it.
  3. Insert two AAA batteries, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Replace the battery compartment cover by sliding it back into place until it clicks securely.
Back of the Easytry123 replacement remote control with the battery compartment open, showing two AAA battery slots.

This image illustrates the rear of the remote control with the battery cover removed, revealing the compartment designed for two AAA batteries. Observe the positive (+) and negative (-) terminals for correct battery insertion.

5. Operating Instructions

Point the remote control directly at the infrared receiver on your Sanyo TV. Ensure there are no obstructions between the remote and the TV.

  • Power Button: Turns the TV on or off.
  • Number Buttons (0-9): Selects channels directly.
  • Channel Up/Down: Changes channels sequentially.
  • Volume Up/Down: Adjusts the sound level.
  • Mute Button: Silences the TV audio.
  • Input/Source Button: Cycles through available input sources (HDMI, AV, etc.).
  • Menu Button: Accesses the TV's main menu.
  • Navigation Buttons (Up/Down/Left/Right/OK): Navigates through TV menus and confirms selections.

For specific functions not listed, refer to your Sanyo TV's original user manual.

6. Maintenance

  • Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Battery Replacement: Replace batteries when the remote's performance degrades or if it stops responding. Always replace both batteries simultaneously.
  • Storage: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

  • Remote not responding:
    • Check if the batteries are inserted correctly with the correct polarity.
    • Replace old batteries with new ones.
    • Ensure there are no obstructions between the remote and the TV's infrared sensor.
    • Confirm that the remote is pointed directly at the TV.
  • Some functions do not work:
    • This is a replacement remote. Not all functions of the original remote may be supported. Focus on essential controls.
    • Verify your TV model is listed as compatible in the introduction.

8. Specifications

Brand Easytry123
Model Number Easytry4911
Compatible Devices Sanyo LCD HDTV Televisions (RC-1900, 10062354, CE26LD90DV-B, CE22LC90DVN-C-P, CE19LD90DV-B, 10062392, CE22LD90DV-B)
Connectivity Technology Infrared (IR)
Controller Type Button Control
Batteries Required 2 x AAA (not included)
Special Feature Ergonomic design

9. Warranty and Support

As a replacement item, specific warranty details may vary. For any issues or support inquiries regarding this Easytry123 replacement remote control, please contact the seller directly through your purchase platform. Ensure to provide your order details and the model number (Easytry4911) for efficient assistance.

Please note that this product is a replacement and may not offer all functionalities of an original equipment manufacturer (OEM) remote. Compatibility is specified for the listed Sanyo TV models.

© 2023 Easytry123. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.