1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Paulmann 70929 LED Gutta Pendant Light. The Gutta pendant light features a delicate and subtle design, providing a focused light effect. Its high-quality textile cable allows for individual length adjustment. Please read these instructions carefully before installation and retain them for future reference.
Safety Information
- Always disconnect power before installation, maintenance, or cleaning.
- Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- Do not modify the product in any way.
- Ensure the mounting surface can support the weight of the fixture.
- This product is designed for indoor use only (IP20 rating).
- The LED light source is integrated and not replaceable by the user.
2. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- Paulmann 70929 LED Gutta Pendant Light fixture (with integrated LED)
- Mounting hardware (screws, anchors)
- Installation instructions (this manual)
Image 1: Paulmann 70929 LED Gutta Pendant Light. This image shows the complete pendant light assembly, including the ceiling canopy, adjustable textile cable, and the conical brushed aluminum lamp head.
3. Specifications
| Brand | Paulmann |
| Model Number | 70929 |
| Dimensions (L x W x H) | 7.2 x 7.2 x 150 cm (adjustable height) |
| Weight | 428 g |
| Material | Metal (Brushed Aluminum) |
| Input Voltage | 230 Volts (AC) |
| Power Consumption | 7 Watts |
| Luminous Flux | 600 lm |
| Color Temperature | 2700 Kelvin (Warm White) |
| Dimmable | No |
| Average Lifespan | 30,000 Hours |
| IP Rating | IP20 |
| Installation Type | Ceiling Mount |
| Light Source | Integrated LED (not user-replaceable) |
Image 2: Dimensions of the Paulmann 70929 LED Gutta Pendant Light. This diagram illustrates the key measurements: a ceiling canopy diameter of 72mm, a lamp head diameter of 33mm, and an adjustable suspension length ranging from 40.1cm to 150cm.
4. Setup and Installation
Important: Ensure the main power supply is switched off at the circuit breaker before beginning installation.
- Prepare the Installation Area:
Identify the desired mounting location on the ceiling. Ensure there is adequate structural support and access to electrical wiring. Mark the drilling points for the mounting bracket using the fixture's canopy as a template.
- Mount the Bracket:
Drill holes at the marked points. Insert appropriate wall anchors if necessary. Secure the mounting bracket to the ceiling using the provided screws.
- Connect Electrical Wiring:
Carefully connect the household electrical wires to the corresponding terminals on the pendant light fixture. Typically, this involves connecting live (L), neutral (N), and ground (E/GND) wires. Ensure all connections are secure and properly insulated. Consult a qualified electrician if you are unsure about wiring procedures.
- Adjust Cable Length:
Adjust the length of the textile cable to your desired height. The cable length can be adjusted within the ceiling canopy. Once adjusted, secure the cable firmly.
- Attach the Fixture:
Carefully attach the pendant light fixture to the mounted bracket, ensuring it is securely fastened. Make sure no wires are pinched during this process.
- Restore Power:
Once the installation is complete and all connections are secure, restore power at the circuit breaker. Test the light fixture.
Image 3: The Paulmann 70929 LED Gutta Pendant Light installed in a modern living space. The image shows the pendant light hanging above a small side table, providing focused illumination. Other elements in the room include a white armchair, a floor lamp, and decorative storage baskets.
5. Operating Instructions
The Paulmann 70929 LED Gutta Pendant Light is designed for simple operation.
- Turning On/Off: Control the light using a standard wall switch connected to the fixture's power supply.
- Light Output: The integrated LED provides a warm white light at 2700 Kelvin with a luminous flux of 600 lumens.
- Non-Dimmable: This fixture is not dimmable. Do not connect it to a dimmer switch, as this may damage the LED driver or the fixture itself.
Image 4: Close-up view of the Paulmann 70929 LED Gutta Pendant Light's lamp head. The brushed aluminum finish is visible, and the integrated LED emits a warm, focused light from the conical tip.
6. Maintenance
Regular cleaning and proper care will help maintain the appearance and performance of your pendant light.
- Cleaning:
Before cleaning, ensure the power supply is disconnected. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- LED Light Source:
The LED light source is integrated and has a long average lifespan of 30,000 hours. It is not designed to be replaced by the user. If the LED fails, the entire fixture may need to be replaced.
7. Troubleshooting
If you encounter issues with your Paulmann 70929 LED Gutta Pendant Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
If the problem persists after attempting these solutions, please contact Paulmann customer support or a qualified electrician.
8. Warranty and Support
Paulmann products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Paulmann website.
For technical support, spare parts, or further assistance, please contact Paulmann customer service:
- Website: www.paulmann.com
- Refer to your regional Paulmann contact information for local support.
