Dainolite DAIN701LEDF-SB
Dainolite 30W Torchier Floor Lamp User Manual
Model: DAIN701LEDF-SB
Introduction
This manual provides essential information for the safe and efficient operation of your Dainolite 30W Torchier Floor Lamp. This contemporary floor lamp features a sleek modern design with a satin black finish, integrated LED, and dimmable functionality, making it suitable for various lighting needs from ambient light to reading. Please read this manual thoroughly before installation and use, and retain it for future reference.
Safety Information
Your Dainolite Torchier Floor Lamp is designed with safety in mind and is UL approved. Adhering to the following safety guidelines is crucial for preventing injury and damage:
- Ensure the lamp is placed on a stable, level surface to prevent tipping.
- Do not operate the lamp with a damaged cord or plug.
- Do not expose the lamp to water or excessive moisture.
- This lamp uses integrated LED lighting; no bulb replacement is necessary.
- Always unplug the lamp from the power outlet before cleaning or moving.
- Keep away from flammable materials.
Image: Graphic indicating that all Dainolite fixtures are UL approved, meaning products are tested to industry standards, certified safe to use in homes and businesses, and legal to install.
Package Contents
Upon opening the package, please verify that all components are present and undamaged:
- Dainolite 30W Torchier Floor Lamp (Integrated LED)
- No Additional Item (as per product specifications)
Setup and Assembly
The Dainolite Torchier Floor Lamp is designed for easy assembly. Follow these general steps:
- Carefully remove all components from the packaging.
- Assemble the lamp pole sections by screwing them together clockwise until secure.
- Attach the assembled pole to the base, ensuring it is firmly tightened.
- Ensure the top light fixture is securely attached to the pole.
- Place the lamp in your desired location, ensuring the power cord can reach an outlet without being strained or creating a tripping hazard.
Image: The Dainolite Torchier Floor Lamp positioned in a living room, demonstrating its assembled appearance and typical placement next to furniture.
Optimal Placement for Task Lighting
For task lighting, such as reading, position the lamp 12 to 24 inches away from your working or reading area. The bottom of the light source should be positioned just below eye level to minimize glare and maximize illumination.
Image: A diagram illustrating the recommended distance (12-24 inches) and height for a floor lamp when used for task lighting, such as reading at a table.
Operating Instructions
The Dainolite Torchier Floor Lamp features a dimmable integrated LED light source, controlled via a push button.
- Plug the lamp's power cord into a standard 120V AC electrical outlet.
- Locate the push button controller on the lamp pole.
- To turn on/off: Press the button once to turn the lamp on or off.
- To dim: While the lamp is on, press and hold the button to cycle through brightness levels. Release the button when the desired brightness is reached.
Maintenance
Regular maintenance will help prolong the life and appearance of your lamp.
- Cleaning: Ensure the lamp is unplugged before cleaning. Use a soft, dry cloth to wipe down the lamp's surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Integrated LED: The lamp uses an integrated LED light source that does not require replacement. If the light source malfunctions, please contact customer support.
Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Not plugged in; power outlet not active; faulty switch. | Ensure the lamp is securely plugged into a working outlet. Test the outlet with another device. If issues persist, contact customer support. |
| Light flickers or dims unexpectedly. | Unstable power supply; internal wiring issue. | Ensure the lamp is connected to a stable power source. Avoid using with overloaded circuits. If flickering continues, contact customer support. |
| Dimmable function not working. | Controller malfunction. | Ensure you are pressing and holding the button correctly. If the issue persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Dainolite |
| Model Number | DAIN701LEDF-SB |
| Lamp Type | Floor Lamp (Torchier) |
| Finish Type | Satin Black |
| Base Material | Metal |
| Product Dimensions | 33"D x 15"W x 6"H (11.25 x 11.25 x 72 inches assembled) |
| Item Weight | 6 Pounds |
| Light Source Type | Integrated LED |
| Wattage | 30 Watts (Max Compatible Wattage: 18 Watts) |
| Voltage | 120 Volts |
| Special Feature | Dimmable |
| Controller Type | Push Button |
| Power Source | Corded Electric |
| Certification | UL Approved |
| Country of Origin | China |
| UPC | 065214017572 |
Warranty and Support
Dainolite stands behind the quality of its products. This Torchier Floor Lamp comes with a 5-year warranty from the date of purchase, covering defects in materials and workmanship.
For warranty claims, technical support, or any questions regarding your product, please contact Dainolite customer service. Keep your purchase receipt as proof of purchase.
For more information, visit the official Dainolite website or contact your retailer.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.