EverBrite E011115

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

EverBrite Ultra Bright Tactical Flashlight

Model: E011115

Introduction

Thank you for choosing the EverBrite Ultra Bright Tactical Flashlight, Model E011115. This manual provides essential information for the safe and effective use of your new flashlight. Please read it thoroughly before operation and retain it for future reference.

EverBrite Ultra Bright Tactical Flashlight with included C Alkaline Batteries

Image: EverBrite Ultra Bright Tactical Flashlight, Model E011115, shown with three C Alkaline batteries.

Safety Information

  • Eye Safety: Do not shine the flashlight directly into eyes. The high lumen output can cause temporary vision impairment.
  • Battery Handling:
    • Use only the specified battery type (3 x C Alkaline batteries).
    • Do not mix old and new batteries, or different types of batteries.
    • Ensure batteries are inserted with correct polarity (+/-).
    • Remove batteries if the flashlight will not be used for an extended period to prevent leakage.
    • Dispose of used batteries responsibly according to local regulations.
  • Heat: The flashlight head may become warm during prolonged use on high mode. Handle with care.
  • Water Exposure: This flashlight is not water resistant beyond minor splashes (IPX4 rating). Avoid submerging it in water.
  • Children: Keep out of reach of children.

Package Contents

Verify that all items are present in your package:

  • EverBrite Ultra Bright Tactical Flashlight (Model E011115)
  • 3 x C Alkaline Batteries

Product Overview

Familiarize yourself with the components of your EverBrite flashlight.

Diagram showing flashlight dimensions and battery compartment

Image: Detailed view of the flashlight, highlighting its dimensions and the battery insertion point.

  • LED Lens: Projects the light beam.
  • Zoom Mechanism: Allows adjustment between floodlight and spotlight.
  • Power Button: Controls ON/OFF and mode selection.
  • Battery Compartment: Located at the tail end, holds three C batteries.
  • Wrist Strap: For secure handling.

Setup

Battery Installation

  1. Unscrew the tail cap of the flashlight by turning it counter-clockwise.
  2. Insert three C Alkaline batteries into the battery compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
  3. Screw the tail cap back on clockwise until it is securely tightened.
Flashlight tail cap unscrewed for battery insertion

Image: The flashlight's tail cap is shown unscrewed, revealing the battery compartment for C Alkaline battery insertion.

Operating Instructions

Power ON/OFF and Mode Selection

  • To turn the flashlight ON or OFF, fully press the orange power button located on the side of the flashlight.
  • To cycle through the three lighting modes (High, Low, Strobe), press the power button halfway (without fully clicking) while the flashlight is on.
Flashlight demonstrating High, Low, and Strobe light modes

Image: Visual comparison of the flashlight's High, Low, and Strobe lighting modes.

Adjusting Focus (Zoomable)

The flashlight features an adjustable beam focus to switch between a wide floodlight and a concentrated spotlight.

  • To adjust the focus, gently slide the head of the flashlight forward or backward.
  • Sliding the head forward will narrow the beam into a spotlight for long-distance illumination.
  • Sliding the head backward will widen the beam into a floodlight for broad area illumination.
Flashlight beam showing zoom in and zoom out capabilities

Image: Demonstrates the flashlight's zoom function, transitioning from a wide floodlight (Zoom Out) to a focused spotlight (Zoom In).

Maintenance

  • Cleaning: Wipe the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents. Clean the lens gently with a lens cloth to maintain optimal light output.
  • Battery Replacement: Replace all three C Alkaline batteries simultaneously when the light becomes dim or stops working. Refer to the "Battery Installation" section for instructions.
  • Storage: Store the flashlight in a cool, dry place. Remove batteries if storing for extended periods to prevent corrosion and leakage.

Troubleshooting

ProblemPossible CauseSolution
Flashlight does not turn on.
  • Batteries are dead or low.
  • Batteries inserted incorrectly.
  • Tail cap is loose.
  • Replace with new C Alkaline batteries.
  • Check battery polarity (+/-).
  • Tighten the tail cap securely.
Light is dim or flickers.
  • Batteries are low.
  • Loose connections.
  • Replace batteries.
  • Ensure tail cap is tight and batteries are seated correctly.
Cannot change light modes.
  • Button not pressed correctly.
  • Ensure you are pressing the button halfway to cycle modes, not fully clicking it off and on.

Specifications

FeatureDetail
BrandEverBrite
Model NumberE011115
Light Source TypeLED
Brightness900 Lumens
Light ModesHigh, Low, Strobe
Beam DistanceUp to 1000 ft (300 m) on high-beam mode
Battery Type3 x C Alkaline Batteries (included)
Battery Life46 hours (low-beam), 18 hours (high-beam)
MaterialHeavy-Duty Aluminum Alloy
Dimensions (L x W x H)10.43" x 1.65" x 1.65" (26.5 cm x 4.2 cm x 4.2 cm)
Weight1.06 pounds (approx. 0.48 kg)
Water ResistanceNot Water Resistant (IPX4 for minor splashes)

Warranty and Support

This EverBrite product comes with a manufacturer and seller combination warranty. For specific warranty details, claims, or technical support, please refer to the documentation provided at the time of purchase or contact the seller directly through the platform where the product was acquired.

For general inquiries or to explore other EverBrite products, you may visit the official EverBrite store on Amazon: EverBrite Store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.