Graco SnugRide SnugLock 35 DLX Infant Car Seat Instruction Manual

Product Overview

The Graco SnugRide SnugLock 35 DLX Infant Car Seat is designed to provide secure and comfortable travel for infants. It features SnugLock Technology for a straightforward installation process, whether using the vehicle's seat belt or LATCH system. This car seat is suitable for rear-facing infants weighing 4 to 35 lb and up to 32 inches in height.

Key features include a 1-hand adjustable handle for easy carrying, a Silent Shade canopy that adjusts without disturbing the child, and Click Connect technology for seamless integration with Graco Click Connect strollers.

• SnugLock Technology: Ensures a hassle-free 3-step installation using either the vehicle seat belt or LATCH.
• Growth Adaptability: Protects rear-facing infants from 4 to 35 lb and up to 32 inches.
• Adjustable Handle: Allows for one-hand adjustment, keeping the other hand free.
• SafetyCore: Frontal crash absorption zone designed to absorb crash forces.
• InRight LATCH System: Provides a one-second LATCH attachment and includes a convenient storage compartment.

Safety Information

Always read and follow all instructions and warnings provided in this manual and on the car seat itself. Failure to do so could result in serious injury or death. This car seat is designed for rear-facing use only for infants within the specified weight and height limits.

• Ensure the car seat is installed correctly and securely every time it is used.
• Always use the 5-point harness system and ensure it is snug against your child's body, with the chest clip at armpit level.
• Never place an infant car seat in the front seat where there is an active airbag.
• Do not use the car seat if it has been involved in a moderate to severe crash, even if there is no visible damage.
• Regularly check the car seat for any signs of wear or damage.

Installation

The Graco SnugRide SnugLock 35 DLX offers two primary installation methods: using the vehicle's seat belt or the LATCH system. Both methods utilize SnugLock Technology for a secure fit.

Using the Vehicle Seat Belt:

1. Place the car seat base on the vehicle seat in the rear-facing position.
2. Thread the vehicle's lap and shoulder belt through the designated belt path on the car seat base.
3. Press down firmly on the car seat base while tightening the vehicle seat belt. Listen for the "CLICK!" sound indicating SnugLock engagement.
4. Check for a secure installation: the base should not move more than one inch side-to-side or front-to-back at the belt path.

Using the InRight LATCH System:

1. Locate the lower anchor bars in your vehicle's back seat.
2. Attach the InRight LATCH connectors from the car seat base to the vehicle's lower anchor bars. You should hear a click when properly connected.
3. Press down firmly on the car seat base while pulling the LATCH strap to remove slack. Listen for the "CLICK!" sound indicating SnugLock engagement.
4. Check for a secure installation: the base should not move more than one inch side-to-side or front-to-back at the LATCH connection points.

The car seat base features a 4-position recline and an easy-to-read level indicator to help ensure the correct recline angle for your infant.

Operation

Adjusting the Handle:

The car seat handle can be adjusted with one hand. Press the button located on the top of the handle and pivot the handle to the desired position. Ensure the handle is locked into place before carrying or placing the car seat in the vehicle.

Adjusting the Silent Shade Canopy:

The Silent Shade canopy can be adjusted by gently pulling it forward or pushing it back. Its design allows for quiet adjustment, minimizing disturbance to a sleeping infant.

Click Connect Technology:

This car seat is compatible with Graco Click Connect strollers. To attach, align the car seat with the stroller's receivers and press down until you hear a click, indicating a secure connection. To detach, locate the release lever on the car seat and lift the car seat from the stroller.

Maintenance

Cleaning the Seat Pad:

The seat pad is removable and machine washable on a delicate cycle with cold water. Do not use bleach. Tumble dry on low heat or hang to dry. Refer to the care tag on the seat pad for specific instructions.

Cleaning the Buckle and Harness:

Wipe the buckle and harness straps with a damp cloth. Do not immerse the buckle in water or use cleaning solvents, as this may affect its performance. Ensure all components are dry before reassembly.

Cleaning the Plastic and Metal Parts:

Wipe plastic and metal parts with mild soap and cool water. Do not use abrasive cleaners or solvents.

Troubleshooting

• Car Seat Feels Loose After Installation: Recheck the installation steps for both seat belt and LATCH methods. Ensure the SnugLock mechanism has engaged and the base does not move more than one inch at the belt path. Verify the vehicle seat belt is locked (refer to your vehicle owner's manual).
• Harness Straps Are Difficult to Adjust: Ensure the harness release button is fully pressed when attempting to loosen the straps. Check for any twists in the harness webbing.
• Child Appears Uncomfortable: Verify that the head and body support inserts are correctly positioned for your child's size. Ensure the harness is at or below the child's shoulders for rear-facing use.
• Canopy Does Not Extend/Retract Smoothly: Check for any obstructions or debris in the canopy mechanism.

Specifications

Warranty and Support

For detailed warranty information, product registration, or to contact customer support, please visit the official Graco website or refer to the warranty card included with your product. Keep your proof of purchase for warranty claims.

Graco Customer Service: For assistance with parts, installation, or any other inquiries, please contact Graco customer service directly. Contact information can typically be found on the Graco website or in the product packaging.