WOLTU SR0046whe

WOLTU Garment Rack with Shoe Storage Instruction Manual

Model: SR0046whe

Brand: WOLTU

Introduction

Thank you for choosing the WOLTU Garment Rack with Shoe Storage. This manual provides essential information for the safe assembly, operation, and maintenance of your new product. Please read these instructions carefully before assembly and retain them for future reference.

Safety Information

Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
Assemble the unit on a soft, clean surface to prevent scratches.
It is recommended that two people assemble this product to ensure safety and ease.
Do not exceed the maximum weight capacity for each shelf (20 kg) and the hanging bar (25 kg).
Keep small parts away from children during assembly to prevent choking hazards.
Periodically check all connections and tighten screws as needed to maintain stability.
Avoid placing the rack in direct sunlight or near heat sources to prevent material degradation.

Package Contents

Please verify that all components listed below are included in your package:

Metal frame tubes (various lengths)
Wooden shelves (MDF E1)
Hanging rod
X-shaped crossbars for stability
Adjustable feet
Assembly hardware (screws, bolts, Allen key)
Instruction manual

Assembly Instructions

Follow these steps carefully for proper assembly. It is recommended to have two people for this process.

Step 1: Prepare the Base Frame

Lay out all metal frame tubes. Connect the bottom horizontal tubes to the vertical side tubes using the provided screws. Ensure all connections are secure but do not fully tighten yet.

Close-up of a screw connection on the metal frame

Image: Detail of a screw connection point, showing how the metal tubes are joined.

Step 2: Attach the Shelves

Carefully place the wooden shelves onto the designated supports on the metal frame. Secure them with the appropriate screws. The shelves are made of E1 MDF, providing a stable surface.

Close-up of the wooden shelves on the garment rack

Image: Two wooden shelves installed on the metal frame, showing their position and texture.

Image: Detailed view of the wooden shelf surface, highlighting its texture and finish.

Step 3: Install the Hanging Rod

Insert the hanging rod into the top section of the frame. Ensure it is firmly seated in its supports. This rod can support up to 25 kg of clothing.

Step 4: Secure Crossbars and Adjustable Feet

Attach the X-shaped crossbars to the rear of the frame for enhanced stability. Finally, screw in the adjustable feet at the bottom of each leg. These feet allow for minor height adjustments to ensure the rack stands level on uneven surfaces.

Close-up of the X-shaped crossbars for stability

Image: Detail of the X-shaped crossbars at the back of the rack, designed to reinforce stability.

Close-up of an adjustable foot on the rack

Image: Close-up of an adjustable foot, showing its design for leveling the rack.

Step 5: Final Tightening

Once all components are in place, carefully tighten all screws and bolts. Ensure the rack is stable and level before placing any items on it.

Operating Instructions

The WOLTU Garment Rack is designed for organizing clothes and shoes efficiently.

Hanging Area: Use the top rod to hang garments such as shirts, jackets, and dresses. Distribute weight evenly to maintain stability. Maximum capacity: 25 kg.
Storage Shelves: The two lower wooden shelves are ideal for storing shoes, folded clothes, bags, or storage boxes. Each shelf can support up to 20 kg.
Placement: Position the rack in a bedroom, hallway, or dressing area. Its compact design (60 x 40 x 167 cm) makes it suitable for various spaces.

WOLTU Garment Rack with clothes and a bag in a living room setting

Image: The garment rack in a living room, showcasing its use for hanging clothes and storing items on shelves.

Care and Maintenance

Cleaning: Wipe the metal frame and wooden shelves with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
Dusting: Regularly dust the surfaces to prevent buildup.
Stability Check: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten if necessary.
Avoid Overloading: Do not exceed the specified weight limits to prevent damage or instability.

Troubleshooting

Problem	Possible Cause	Solution
Rack is wobbly/unstable	Screws are loose; uneven floor; overloaded.	Tighten all screws. Adjust the leveling feet. Reduce load to within specified limits.
Parts do not fit together	Incorrect orientation of parts; manufacturing defect.	Review assembly steps and diagrams. Ensure parts are oriented correctly. Contact customer support if parts are defective.
Scratches on surfaces	Rough handling during assembly or use.	Assemble on a soft surface. Handle with care. Minor scratches can sometimes be touched up with furniture markers.

Specifications

Model Number: SR0046whe
Dimensions (L x W x H): 60 x 40 x 167 cm
Weight: 10.7 kg
Material: High-quality metal tube, E1 MDF (wood)
Hanging Rod Capacity: Max. 25 kg
Shelf Capacity: Max. 20 kg per shelf
Color: White frame + Light Oak shelves

Diagram showing the dimensions of the WOLTU garment rack

Image: Technical diagram illustrating the length, width, and height measurements of the garment rack.

Warranty and Support

WOLTU products are designed for quality and durability. For any questions regarding assembly, missing parts, or product defects, please contact WOLTU customer support. Refer to your purchase documentation for specific warranty terms and contact information.

Manufacturer: WOLTU

Website: Visit WOLTU Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.