Sunco LED Wraparound Shop Light Instruction Manual (Model SHW-40W-5K-2PK)

Introduction

Thank you for choosing the Sunco LED Wraparound Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Ensure the supply voltage is compatible with the fixture (120-277V).
Do not handle live wires.
Do not modify the fixture. Any modifications may void the warranty and create safety hazards.
Suitable for damp locations.

Package Contents

Verify that all components are present before beginning installation:

LED Wraparound Shop Light Fixture (2 units for 2-pack)
Mounting Hardware
Linking Cables (for connecting multiple fixtures)
Instruction Manual

Specifications

Model Number	SHW-40W-5K-2PK
Power Consumption	40 Watts
Light Output	3500 Lumens
Color Temperature	5000K Daylight
Voltage	120-277V
Dimensions	48"L x 5.35"W x 2.36"H
Beam Angle	110-degree
CRI	80+
Installation Type	Flush Mount / Hardwired
Special Features	Prismatic Lens, Linkable (up to 8 units), Non-Dimmable
Certifications	ETL

Installation Instructions

This fixture is designed for direct surface mounting to the ceiling. Always ensure power is disconnected before starting installation.

Prepare the Fixture: Carefully remove the diffuser (Part B) from the lamp base (Part A) to access the wiring and mounting points.
Mount the Fixture: Position the lamp base against the ceiling where you intend to install it. Mark the mounting holes. Use appropriate mounting hardware (screws, anchors) to securely attach the lamp base to the ceiling.
Wiring: Bring the electrical supply wires from the junction box to the fixture. Connect the wires according to local electrical codes: Black to Black (Live), White to White (Neutral), Green/Bare Copper to Green (Ground). Ensure all connections are secure with wire nuts.
Replace Diffuser: Once wiring is complete and secure, carefully reattach the diffuser to the lamp base. Ensure it snaps firmly into place along both sides.

Linking Multiple Fixtures

These fixtures are linkable, allowing you to connect up to 8 units from a single power source. Use the provided linking cables or flush linking connectors to connect fixtures end-to-end. Ensure the total wattage of linked fixtures does not exceed the circuit's capacity.

Diagram showing three steps for easy installation: removing diffuser, wiring, and reattaching diffuser and mounting. — **Figure 1: Easy Installation Steps.** This image illustrates the three primary steps for installing the Sunco LED Wraparound Shop Light: 1. Removing the diffuser (Part B) from the lamp base (Part A). 2. Connecting the electrical wires from the fixture to the junction box. 3. Replacing the diffuser and mounting the shop light directly onto the ceiling or wall.

Diagram showing two methods of linking multiple shop lights: using an 8-inch linking cable and a 1.5-inch flush linking connector. — **Figure 2: Daisy Chain Linkability.** This diagram demonstrates how to connect multiple Sunco LED shop lights. The top illustration shows connecting lights using an 8-inch linking cable, while the bottom shows a 1.5-inch flush linking connector for a seamless, continuous appearance. Up to 8 lights can be connected to a single power source.

Operation

Once properly installed and powered, the Sunco LED Wraparound Shop Light will provide instant-on, flicker-free illumination. This fixture is non-dimmable and operates at a 5000K Daylight color temperature, designed to mimic natural daylight for enhanced visibility and alertness.

Image showing a person holding a smartphone displaying a brightly lit room, with an inset graphic highlighting 'Instant-on Technology' and 'Flicker-Free Lights'. — **Figure 3: Flicker-Free Lights.** The fixture features instant-on technology and provides flicker-free illumination, which helps minimize eye strain and fatigue, improving visual comfort in various environments.

Image of a parking garage with a blue car, highlighting the 5000K Daylight color temperature of the lights, with an inset showing the light source. — **Figure 4: 5000K Daylight.** The 5000K Daylight color temperature mimics natural daylight indoors, promoting alertness and enhancing visibility, making it ideal for workshops, garages, and other utility spaces.

Maintenance

The Sunco LED Wraparound Shop Light is designed for long-lasting performance with minimal maintenance. The integrated LED design means there are no bulbs to replace.

Cleaning: Ensure power is off before cleaning. Wipe the fixture and diffuser with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or optical components.
Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and contact a qualified electrician or Sunco Lighting support.

Text 'Never change a tube again!' with icons for 110-degree wide beam angle and 45+ years lifespan, set against an image of a modern office with many ceiling lights. — **Figure 5: Long Lifespan.** Designed to last over 45+ years under typical usage conditions, eliminating the need for frequent bulb replacements.

Troubleshooting

If you experience issues with your Sunco LED Wraparound Shop Light, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Light does not turn on	No power supply; Loose wiring; Faulty fixture.	Check circuit breaker/fuse. Ensure all wire connections are secure. If problem persists, contact Sunco support.
Light is dim or flickering	Incompatible dimmer switch (fixture is non-dimmable); Loose wiring; Power fluctuation; Fixture nearing end of life.	Ensure no dimmer switch is used. Check wiring connections. If dimming occurs after extended use (e.g., 1.5-2 years), it may indicate a component issue. Contact Sunco support for warranty assistance.
Only some linked lights are working	Loose linking cable connection; Faulty individual fixture in the chain.	Check all linking cable connections. Isolate the non-working fixture to determine if it's an individual unit issue.

If troubleshooting steps do not resolve the issue, please contact Sunco Lighting customer support.

Warranty and Support

Sunco Lighting stands behind the quality of its products. This LED Wraparound Shop Light comes with a 7-Year Protection warranty. For warranty claims, technical assistance, or any questions regarding your product, please contact our knowledgeable support specialists.

Contact Information: Please refer to the Sunco Lighting website or your purchase documentation for the most current contact details.

Video: Get to know Sunco. This official video from Sunco Lighting provides an overview of the company's commitment to quality, product testing, and customer service, highlighting their dedication to customer satisfaction and product reliability.

Sunco Lighting SHW-40W-5K-2PK