Product Overview
The eMACROS Long Range Solar Wireless Driveway Alarm System is designed to monitor and protect your outdoor property by detecting movement from humans, cars, and large animals. This system features a weather-resistant motion sensor and a receiver, providing security alerts for your perimeter.

Image: The eMACROS driveway alarm receiver and its product packaging, illustrating the main components of the system.
Setup and Installation
Follow these steps for quick and easy setup of your eMACROS Driveway Alarm System:
- Unpack Components: Carefully remove the receiver, motion sensor, charging cables, and adapters from the packaging.
- Receiver Power: Connect the receiver to a power source using the provided charging cable and adapter. Ensure to use only the original adapter for optimal performance and to prevent damage. Note that this receiver is not compatible with versions prior to 2021.
- Sensor Placement: Install the solar-powered motion sensor in your desired outdoor location, such as a driveway, garden, or entrance. The sensor is designed to be weather-resistant and charges even on cloudy or rainy days.
- Adjust Sensor Angle: Use the swivel mount to refine the focus and detection angle of the sensor. This helps in minimizing false alarms and optimizing detection.
- Sensitivity Adjustment: Adjust the sensor's sensitivity using the internal switch. High sensitivity (Hi) detects up to 30 feet, while low sensitivity (Low) detects up to 20 feet. Refer to the Owner's Instruction Manual (PDF) for detailed instructions.
- System Expansion: The system can be expanded with up to 4 sensors and an unlimited number of receivers for comprehensive property coverage.

Image: A solar-powered motion sensor mounted on a tree, demonstrating its outdoor placement and solar charging capability. The unit charges even on cloudy or rainy days, and it is recommended to use the original cable for charging.

Image: A diagram illustrating the 1500FT wireless transmission range and adjustable detection distances (20ft/30ft) of the eMACROS driveway alarm sensor in a residential setting.
Operating Instructions
Once installed, your eMACROS Driveway Alarm System will reliably alert you to activity:
- Motion Detection: The wireless motion sensor detects movement from various sources including humans, cars, and large animals within its detection range.
- Alert Chimes: The receiver offers 4 unique chime options. You can assign different chimes to different sensors placed around your property. This allows you to quickly identify the specific area where motion is being detected.
- False Alarm Minimization: The sensor's sensitivity can be adjusted (Hi = 30ft, Low = 20ft) to reduce false alarms caused by small animals or environmental factors.

Image: A collage of four scenarios demonstrating the eMACROS driveway alarm's ability to detect different types of movement, including a delivery person, an individual, a car, and a large animal.
Maintenance
The eMACROS Driveway Alarm System is designed for durability and minimal maintenance:
- Weather Resistance: The outdoor sensor features industrial-grade PVC housing and a rubberized weather/water-resistant seal, ensuring reliable operation in various weather conditions, including hail storms, gusty winds, heavy rains, scorching heat, and snow. It is IP65 waterproof.
- Solar Charging: The sensor is solar rechargeable, eliminating the need for battery replacement. It continues to charge even on cloudy or rainy days.
- Cleaning: Periodically wipe the solar panel and sensor lens with a soft, damp cloth to ensure optimal performance and clear detection.

Image: The eMACROS driveway alarm sensor mounted on a wooden post, with text indicating its ability to resist extreme weather conditions, including burning sun, temperatures from -4°F to 140°F, and IP65 waterproof rating.
Troubleshooting
While the eMACROS system is designed for reliability, here are some common issues and solutions:
- Frequent False Alarms:
Adjust the sensor's sensitivity switch to "Low" (20ft detection) if it's currently on "Hi" (30ft). Ensure the sensor is not pointed directly at moving foliage, reflective surfaces, or areas with frequent small animal activity. Re-adjust the swivel mount to optimize the detection angle.
- No Detection:
Verify the sensor is properly powered and its solar panel is clean and receiving adequate sunlight. Check the sensor's sensitivity setting; if it's too low for the desired detection range, switch it to "Hi". Ensure there are no obstructions blocking the sensor's line of sight to the detection area. Confirm the receiver is powered on and within range (up to 1500 feet in most conditions).
- Receiver Not Responding:
Ensure the receiver is properly plugged in using the original adapter. Check if the receiver's volume is turned up. If multiple sensors are paired, ensure the correct chime is selected for the activated sensor.
For further assistance, please refer to the full Installation Manual (PDF) or contact eMACROS customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | eMACROS |
| Model Number | HS002C |
| Color | Old Receiver (System components are typically brown/black) |
| Power Source | Corded Electric (for receiver), Solar Rechargeable (for sensor) |
| Item Weight | Approximately 2.2 pounds (total system) |
| Maximum Wireless Range | 1500 Feet (line of sight, may vary with obstructions) |
| Mounting Type | Wall Mount (for sensor) |
| Battery Type (Sensor) | Internal Solar Rechargeable Battery (no user replacement needed) |
| Operating Temperature Range | -20°C to 60°C (-4°F to 140°F) |
| Frequency | 433 MHz |
| Product Dimensions | 6.22"D x 6.14"W x 1.65"H (approximate for receiver) |
| Material | Industrial-grade PVC housing (for sensor) |
| Included Components | 1 Receiver, Charging Cables, Adapters |
Warranty and Support
eMACROS is committed to providing reliable products and customer satisfaction. While specific warranty details are not provided in this manual, please refer to the official eMACROS website or the original product packaging for warranty information.
For technical support, troubleshooting, or any inquiries regarding your eMACROS Driveway Alarm System, please visit the official eMACROS store or contact their customer service:
- Online Support: Visit the eMACROS Store on Amazon.
- Installation Manual: A detailed Installation Manual (PDF) is available for download.




