1. Introduction
Thank you for choosing the Grifema G14001 Removable Kitchen Faucet. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new kitchen faucet. Please read these instructions carefully before installation and keep them for future reference.
2. Safety Information
- Always turn off the main water supply before beginning any installation or maintenance work.
- Ensure all connections are secure to prevent leaks.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Do not use abrasive cleaners or harsh chemicals on the faucet's finish, as this may damage it.
3. Package Contents
Verify that all components are present before beginning installation:
- 1 x Grifema G14001 Kitchen Faucet
- 1 x Mixer tap washer kit
- 2 x 40 cm Connection Hoses (Hot and Cold)
- Mounting hardware (gasket, fixing nut, etc.)
Figure 3.1: All components included in the Grifema G14001 package. This image displays the main faucet body, two flexible connection hoses, a washer kit, and various mounting hardware pieces.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | G14001 |
| Brand | GRIFEMA |
| Material | Brass, Plastic |
| Finish | Chrome |
| Color | Silver |
| Installation Method | Surface Mounted |
| Number of Handles | 1 |
| Number of Holes Required | 1 |
| Flow Rate | 2.2 Liters per minute |
| Hose Length | 40 Centimeters |
| Product Dimensions (L x W x H) | 7.5 x 30 x 68 cm |
| Weight | 3.26 Kilograms |
| Special Feature | Rotatable Spout, Pull-out Spray |
Figure 4.1: Dimensional drawing of the Grifema G14001 faucet, showing key measurements for height, reach, and base width.
5. Setup / Installation
Follow these steps for proper installation of your Grifema G14001 kitchen faucet. Ensure the main water supply is turned off before starting.
- Prepare the Sink Hole: Ensure your sink has a single mounting hole with a diameter of approximately Ø35mm.
- Insert the Faucet: Place the faucet body into the mounting hole on your sink or countertop. Ensure the base gasket is correctly positioned.
- Secure the Faucet: From underneath the sink, slide the rubber gasket and metal washer onto the threaded shank of the faucet. Secure it tightly with the fixing nut.
- Connect Water Hoses: Connect the hot (H) and cold (C) water supply hoses to the corresponding inlets on the faucet and to your hot and cold water supply lines. Ensure connections are hand-tightened, then use a wrench for a final quarter turn, being careful not to overtighten.
- Attach Pull-Out Hose Weight: Attach the counterweight to the pull-out spray hose underneath the sink. This ensures the spray head retracts smoothly.
- Test for Leaks: Turn on the main water supply and check all connections for leaks. Operate the faucet to ensure proper water flow and temperature control.
Figure 5.1: Step-by-step visual guide for installing the Grifema G14001 kitchen faucet, showing the insertion into the sink hole, securing the base, and connecting the water lines.
6. Operating Instructions
Your Grifema G14001 faucet is designed for ease of use and versatility.
- Water Flow and Temperature Control: The single lever handle controls both water flow and temperature. Lift the handle to increase flow, and move it left for hot water or right for cold water.
- Dual Spray Modes: The pull-out spray head features two distinct spray modes. Press the button on the spray head to switch between a powerful shower jet and a steady aerated stream.
- Flexible Pull-Out Hose: The ultra-flexible hose simplifies daily tasks, providing extended reach and greater operating space within your sink area.
- 360-Degree Rotation: The faucet spout can rotate 360 degrees, offering maximum flexibility and convenience for various sink configurations and tasks.
Figure 6.1: The Grifema G14001 faucet demonstrating its two spray modes: a concentrated stream and a wide spray pattern.
Figure 6.2: The Grifema G14001 faucet illustrating its 360-degree rotatable spout for enhanced flexibility.
7. Maintenance
Proper care will ensure the longevity and appearance of your Grifema G14001 faucet.
- Cleaning the Finish: Clean the faucet regularly with a soft cloth and mild soap and water. Rinse thoroughly and dry with a soft cloth to prevent water spots. Avoid abrasive cleaners, ammonia, bleach, or acid-based cleaners, as these can damage the chrome finish.
- Cleaning the Aerator: If water flow becomes restricted, the aerator may be clogged. Unscrew the aerator from the spray head, clean any debris or mineral deposits, and rinse thoroughly before reattaching.
- Ceramic Cartridge: The faucet is equipped with a durable ceramic cartridge designed for long-term, drip-free performance. No regular maintenance is typically required for the cartridge itself.
Figure 7.1: The Grifema G14001 faucet highlighting its water-saving aerator, which can be removed for cleaning.
8. Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator or debris in water lines. | Clean the aerator (see Section 7). Check water supply valves are fully open. |
| Leaks at Connections | Loose connections or damaged washers. | Ensure all connections are tightened properly. Replace washers if damaged. |
| Spray Mode Not Switching | Debris in spray head mechanism or faulty switch. | Remove and clean the spray head. If the issue persists, contact customer support. |
| Faucet Drips | Worn ceramic cartridge. | While the ceramic cartridge is designed for durability, if dripping occurs, it may need replacement. Contact customer support for assistance. |
| Pull-Out Spray Not Retracting | Counterweight improperly positioned or obstructed. | Check the position of the counterweight on the hose underneath the sink. Ensure it moves freely and is not obstructed. |
9. Warranty and Support
GRIFEMA products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official GRIFEMA website. Please have your model number (G14001) and purchase date available when contacting support.
