Bryton Rider 15E GPS Cycle Computer User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Bryton Rider 15E GPS Cycle Computer. Please read this manual thoroughly to ensure proper use and to maximize the performance and longevity of your device.

Package Contents

Upon opening the package, verify that all the following items are included:

• Bryton Rider 15E GPS Cycle Computer
• USB Charging Cable (Mini-USB)
• Bike Mount
• Rubber Bands for Mount Installation
• Quick Start Guide / User Manual (this document)

Product Overview

The Bryton Rider 15E is a compact and user-friendly GPS cycle computer designed to track your cycling data. It features a clear LCD display and intuitive button controls.

Figure 1: Front view of the Bryton Rider 15E, showing the main display with various data fields such as current speed (35.6 km/h), cadence (96), heart rate (183), and total distance (45.3 km). Icons for GPS signal, battery level, and connected sensors are also visible.

Device Layout

The Rider 15E features a 2-inch LCD screen and three physical buttons for navigation and control.

• Display Screen: A 2-inch LCD screen provides clear visibility of cycling data.
• Buttons: Three buttons are located on the device: two on the back and one on the bottom.
• Bottom Button: Used to toggle between different display screens and menu options.
• Back Buttons: Typically used for power on/off, starting/stopping recording, and menu selections. The specific functions can be found in the 'Operation' section.

Figure 2: Multiple views of the Bryton Rider 15E, illustrating the front display, side profiles, and the back panel which includes the mounting mechanism and two control buttons. The USB port is also visible on one of the side views.

Setup

1. Mounting the Device

1. Select a suitable location on your bicycle's handlebar or stem for the bike mount.
2. Secure the bike mount using the provided rubber bands. Ensure the mount is firmly attached and does not rotate freely.
3. Align the Bryton Rider 15E with the mount, place it onto the mount, and rotate it 90 degrees until it clicks securely into place.

2. Initial Power On and Charging

• To power on the device, press and hold the designated power button (refer to Figure 2 for button location).
• Before first use, it is recommended to fully charge the device. Connect the provided USB charging cable to the device's USB port and a power source (e.g., computer USB port or USB wall adapter). The battery indicator on the screen will show charging status.

3. Pairing with the Bryton Active App

1. Download the "Bryton Active" app from your smartphone's app store (available for iOS and Android).
2. Enable Bluetooth on your smartphone.
3. Open the Bryton Active app and follow the on-screen instructions to create an account or log in.
4. In the app, navigate to the device pairing section and select "Add Device".
5. The app will search for your Rider 15E. Select your device from the list to complete the pairing process.
6. Once paired, you can customize display screens, set up user profiles, and link to third-party applications like Strava through the Bryton Active app.

Operation

1. Starting and Stopping a Ride Recording

• Ensure the device is powered on and has acquired a GPS signal (indicated by the GPS icon on the display).
• To start recording your ride, press the designated start/stop button (one of the back buttons). The recording icon will appear on the screen.
• To stop recording, press the same start/stop button again. The recording will cease, and the data will be saved.
• The device features an automatic pause function. When you stop moving, the recording will automatically pause and resume when you start cycling again.

2. Navigating Display Screens

• The Rider 15E allows you to view various cycling data across multiple customizable screens.
• Press the bottom button to cycle through the different display screens.
• Each screen can display 3 or 4 data fields, which can be configured via the Bryton Active app. Common data fields include speed, distance, time, cadence, and heart rate (if external sensors are paired).

Figure 3: The Bryton Rider 15E display showing ride duration (0:35:26), current speed (42.6 km/h), and total distance covered (126.7 km). This illustrates one of the customizable data screens.

3. Syncing Ride Data

• After completing a ride, open the Bryton Active app on your paired smartphone.
• The device will automatically sync your ride data to the app via Bluetooth.
• From the Bryton Active app, you can review your ride statistics, track progress, and automatically upload data to connected third-party platforms like Strava.

Maintenance

1. Charging the Battery

• The Rider 15E is powered by a rechargeable Lithium Polymer battery.
• Charge the device using the provided USB cable. A full charge typically provides up to 16 hours of operation.
• Avoid exposing the device to extreme temperatures during charging.

2. Cleaning and Storage

• Clean the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Ensure the USB port cover is securely closed to maintain water resistance.
• Store the device in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.

3. Water Resistance

• The Bryton Rider 15E has an IP54 waterproof rating, meaning it is protected from dust and splashing water from any direction.
• It is suitable for use in light rain but should not be submerged in water.

Troubleshooting

Common Issues and Solutions

• Device not powering on: Ensure the battery is charged. Connect to a power source and try again. If the issue persists, perform a soft reset by holding down all buttons for 10 seconds.
• GPS signal not acquired: Ensure you are in an open area with a clear view of the sky. It may take a few minutes to acquire a signal, especially after initial power-on or if the device has been moved a significant distance.
• Unable to pair with Bryton Active app: Ensure Bluetooth is enabled on your smartphone and the device is within range. Try restarting both the device and your smartphone. If pairing fails, try unpairing and re-pairing the device in your phone's Bluetooth settings and the Bryton Active app.
• External sensors not connecting: Verify that your sensors (e.g., heart rate monitor, cadence sensor) are compatible with Bluetooth. Ensure the sensors have fresh batteries and are properly activated. Try re-pairing them through the Bryton Active app. Note that some older ANT+ only sensors may not be compatible.
• Inaccurate data or freezing: Ensure the device firmware is up to date via the Bryton Active app. If the device freezes, hold down the power button to force a restart.
• Ride data not syncing to Strava: Confirm that your Strava account is correctly linked within the Bryton Active app settings. Ensure a stable internet connection on your smartphone during synchronization.

If you encounter issues not covered here, please refer to the official Bryton support website or contact customer service for further assistance.

Specifications

Warranty and Support

For warranty information, product registration, and technical support, please visit the official Bryton website or contact your local Bryton dealer. Keep your proof of purchase for warranty claims.

Official Bryton Store: Bryton Store on Amazon.co.jp