Introduction
This manual provides instructions for the Easytry123 replacement remote control, designed for use with various Yamaha A/V receiver and amplifier models. This remote is a functional replacement and may not offer all features or button layouts identical to your original equipment remote control. Please review this guide for proper setup and operation.
Compatible Yamaha Models:
- RAV361
- WH25420
- EX
- RAV360
- WH254100
- RX-V1700
- RX-V1700BL
- HTR-6090
- HTR-R6090BL
- DSP-AX1700
Image: Front view of the Easytry123 replacement remote control, showing the button layout and display screen.
Setup
Battery Installation
The remote control requires two (2) AA batteries for operation. Batteries are not included with this product.
- Locate the battery compartment on the back of the remote control.
- Press down on the tab and slide the battery cover off.
- Insert two AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Image: Rear view of the remote control with the battery compartment open, showing the slots for two AA batteries.
Operating Instructions
This replacement remote control is pre-programmed for the listed Yamaha models. No additional programming is typically required for basic functions.
Basic Functions
- Power: Press the POWER button to turn the A/V receiver on or off.
- Volume Control: Use the VOLUME + and VOLUME - buttons to adjust the audio level.
- Input Selection: Use buttons like CD, DVD, TUNER, PHONO, etc., to select the desired audio/video input source.
- Navigation: Use the directional arrow buttons (UP, DOWN, LEFT, RIGHT) and ENTER button for menu navigation.
- Mute: Press the MUTE button to temporarily silence the audio.
Note: Specific advanced functions or menu navigation may vary depending on your Yamaha receiver model and the original remote's capabilities. This replacement remote focuses on core operational commands.
Maintenance
Cleaning the Remote
To clean the remote control, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the remote's surface or internal components.
Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AA batteries. Do not mix old and new batteries, or different types of batteries, as this can lead to leakage or malfunction.
If the remote will not be used for an extended period, remove the batteries to prevent potential leakage and damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding | Dead or incorrectly installed batteries. Obstruction between remote and receiver. Remote out of range. |
|
| Some functions not working | The replacement remote may not support all original functions. | This replacement remote is designed for core functions. Not all advanced features of your original remote may be replicated. Refer to your Yamaha receiver's original manual for specific advanced operations. |
| Remote works intermittently | Low battery power. Interference. |
|
Specifications
- Model: Easytry4887
- Brand: Easytry123
- Compatible Devices: Yamaha A/V Receivers (RAV361, WH25420, EX, RAV360, WH254100, RX-V1700, RX-V1700BL, HTR-6090, HTR-R6090BL, DSP-AX1700)
- Power Source: 2 x AA Batteries (not included)
- Material: New ABS Plastic
- Color: Black
- Max Number of Supported Devices: 1
- Special Feature: Replacement remote; functions may vary from original.
Support
For further assistance or inquiries regarding this Easytry123 replacement remote control, please refer to the seller's contact information on your purchase platform.
Note: This product is a replacement remote and is not manufactured by Yamaha. For support related to your Yamaha A/V receiver, please consult the original Yamaha product manual or Yamaha's official support channels.