Puig 9734H New Generation Windscreen

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Puig 9734H New Generation Windscreen. This product is specifically designed for the Honda CB300R Neo Sports Cafe models manufactured between 2018 and 2019. The windscreen is constructed from 3mm methacrylate, offering enhanced aerodynamic performance and protection from wind elements during motorcycle operation.

Image 1.1: Puig 9734H Windscreen installed on a Honda CB300R.

2. Safety Information

Please read and understand all safety instructions before proceeding with installation or use. Failure to follow these instructions may result in injury or damage to the product or motorcycle.

• Professional Installation Recommended: If you are not confident in your mechanical abilities, seek professional assistance for installation.
• Check Fasteners: Regularly inspect all mounting hardware to ensure it remains securely tightened. Loose components can lead to instability or detachment during operation.
• Protective Gear: Always wear appropriate motorcycle safety gear, including a helmet, eye protection, and protective clothing, when operating your motorcycle.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

3. Package Contents

Verify that all components are present and undamaged before beginning installation.

• Puig 9734H New Generation Windscreen (1 unit)
• Mounting Hardware Kit (specific to Honda CB300R Neo Sports Cafe 2018-2019)
• Installation Instructions (refer to manufacturer's detailed guide if provided separately)

Image 3.1: Puig 9734H Windscreen component.

4. Setup and Installation

The installation process typically involves attaching the windscreen to the motorcycle's handlebar or headlight assembly using the provided mounting hardware. While specific steps may vary, the general procedure is as follows:

1. Prepare the Motorcycle: Ensure the motorcycle is stable on a stand and the engine is off and cool.
2. Unpack Components: Carefully remove all items from the packaging and identify each part.
3. Assemble Mounting Brackets: Attach any necessary bracket components as per the manufacturer's specific instructions.
4. Position Windscreen: Align the windscreen with the mounting points on the motorcycle.
5. Secure Fasteners: Install all bolts, washers, and nuts, tightening them progressively and evenly. Do not overtighten, as this can damage components.
6. Final Check: Verify that the windscreen is securely mounted and does not interfere with steering, controls, or lighting.

Note: Installation typically takes approximately 15-20 minutes. Refer to any detailed diagrams or instructions included with your specific mounting kit for precise steps.

Image 4.1: Installed windscreen, right side view.

5. Operating

Once correctly installed, the Puig 9734H New Generation Windscreen functions passively to redirect airflow over and around the rider. This design aims to reduce wind pressure on the rider's chest and helmet, contributing to a more comfortable riding experience, especially at higher speeds. The windscreen's aerodynamic properties are optimized to integrate with the motorcycle's design.

6. Maintenance

Proper maintenance will ensure the longevity and clarity of your windscreen.

• Cleaning: Clean the windscreen regularly using a soft cloth, mild soap, and lukewarm water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can scratch or damage the methacrylate material. Rinse thoroughly and dry with a clean, soft cloth to prevent water spots.
• Inspection: Periodically check the windscreen for any signs of cracks, deep scratches, or damage. Inspect all mounting hardware for tightness and corrosion. Replace any damaged components immediately.

7. Troubleshooting

• Excessive Wind Noise: While the windscreen is designed to reduce wind pressure, some riders may experience increased wind noise, particularly around the helmet area, due to altered airflow. Consider wearing ear protection if this becomes bothersome.
• Vibration or Instability: If the windscreen vibrates or feels unstable, re-check all mounting bolts and ensure they are securely tightened. Verify that the mounting brackets are correctly positioned and not bent or damaged.
• Incorrect Fitment: If the windscreen does not fit correctly, double-check the product model number (9734H) against your motorcycle's make and model (Honda CB300R Neo Sports Cafe, 2018-2019). Ensure you have the correct product for your specific motorcycle.

8. Specifications

9. Warranty and Support

Puig products are manufactured to high standards. For information regarding warranty coverage, claims, or technical support, please refer to the official Puig website or contact their customer service department directly. Keep your purchase receipt as proof of purchase.