1. Introduction
This manual provides essential information for the proper use, maintenance, and troubleshooting of the Ecolab Antibacterial Foaming Hand Soap, Model 6101090. This product is designed for use in relevant Ecolab dispensers in high-traffic bathrooms and kitchens, providing advanced antibacterial hand cleansing.
Figure 1: Ecolab Antibacterial Foaming Hand Soap 750ml bottle. The bottle contains blue foaming hand soap and features a light blue pump dispenser. A label on the front indicates "ECOLAB", "6101090", "Advanced Antibacterial Foaming Hand Soap", "750 mL (25.3 FL OZ)", and "Active ingredient Benzalkonium chloride 0.5%".
2. Safety Information
Adherence to the following safety guidelines is crucial for safe and effective use of this product.
- For external use only. Do not ingest.
- Keep away from children and pets.
- Avoid contact with eyes. In case of contact, rinse thoroughly with water.
- Discontinue use if irritation or redness develops. Consult a physician if condition persists.
- Store in a cool, dry place away from direct sunlight.
3. Setup
This product is designed as a refill for compatible Ecolab dispensers. Ensure you have the correct dispenser before proceeding.
- Prepare the Dispenser: If replacing an empty bottle, remove the old bottle from the Ecolab dispenser according to the dispenser's instructions.
- Uncap the New Bottle: Carefully remove the cap from the Ecolab Antibacterial Foaming Hand Soap bottle.
- Insert into Dispenser: Align the new bottle with the dispenser's mechanism and firmly insert it until it clicks into place or is securely seated.
- Prime the Dispenser: Pump the dispenser several times until foam is consistently dispensed.
4. Operating Instructions
Follow these steps for effective hand washing:
- Wet Hands: Wet hands with clean, running water.
- Dispense Soap: Pump the dispenser once or twice to dispense an adequate amount of foaming hand soap into your palm.
- Lather and Scrub: Rub hands together to create a rich lather, ensuring to cover all surfaces of your hands, including between fingers and under nails. Scrub for at least 20 seconds.
- Rinse Hands: Rinse hands thoroughly under clean, running water until all soap is removed.
- Dry Hands: Dry hands using a clean towel or air dryer.
5. Maintenance
Regular maintenance ensures optimal performance and hygiene.
- Dispenser Cleaning: Periodically clean the exterior of the soap dispenser with a damp cloth to remove any residue or dust.
- Refill Monitoring: Monitor the soap level in the dispenser and replace the bottle when it is empty to ensure continuous availability.
- Storage: Store unopened bottles in their original packaging in a cool, dry place.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No foam dispensed. | Bottle is empty or not properly seated. | Check soap level and replace bottle if empty. Ensure bottle is securely inserted into the dispenser. Prime the dispenser by pumping several times. |
| Foam is weak or watery. | Low soap level or air in the pump. | Replace the bottle if nearly empty. Continue to prime the dispenser until consistent foam is produced. |
| Dispenser is clogged. | Dried soap residue. | Clean the dispenser nozzle with a damp cloth. If the clog persists, consult the dispenser's manual or contact Ecolab support. |
7. Specifications
- Product Name: Ecolab Antibacterial Foaming Hand Soap
- Model Number: 6101090
- Brand: Ecolab
- Active Ingredient: Benzalkonium chloride 0.5%
- Volume: 750 ml (25.3 fl oz)
- Quantity: 1 Bottle per order
- Special Feature: Antibacterial
- Recommended Use: Hand cleansing
- UPC: 025469028563
- Package Dimensions: 7.91 x 5.91 x 4.09 inches
- Package Weight: 1.97 Pounds
- Manufacturer: ECOLAB
8. Warranty and Support
For information regarding product warranty or technical support, please refer to the official Ecolab website or contact their customer service directly. This product is intended for use with compatible Ecolab dispensing systems.
Visit the official Ecolab Store for more information: Ecolab Store on Amazon
