1. Product Overview
The MAAX Exhibit Acrylic Bathtub, Model 106221-L-000-001, is designed for alcove installation, offering a sleek and functional addition to your bathroom. This rectangular bathtub features a left-hand drain location, an integrated tiling flange for easier installation, and a minimalist design with discreet armrests and a textured floor for safety. An integrated skirt is included, which may feature an access panel if the tub is equipped with a system.
Image 1.1: The MAAX Exhibit Bathtub in a complete bathroom setting, showcasing its alcove installation and minimalist design.
2. Setup and Installation
Installation of the MAAX Exhibit Bathtub requires careful planning and adherence to local building codes. It is highly recommended that installation be performed by a qualified professional plumber or contractor.
2.1 Pre-Installation Checklist
- Verify all dimensions and ensure the bathtub fits the designated alcove space.
- Inspect the bathtub for any shipping damage before installation. Do not install a damaged product.
- Ensure the subfloor is level, structurally sound, and capable of supporting the weight of the filled bathtub and user.
- Confirm the left-hand drain location aligns with existing plumbing.
- Gather all necessary tools and materials, including plumbing supplies, shims, and appropriate sealants.
2.2 Installation Steps (General Guidelines)
- Prepare the Alcove: Ensure the alcove walls are plumb and square. Install any necessary backing or framing for the tiling flange.
- Position the Bathtub: Carefully place the bathtub into the alcove. Ensure the integrated tiling flange is properly seated against the studs.
- Leveling: Use shims as needed under the bathtub's feet or base to ensure it is perfectly level. This is crucial for proper drainage.
- Connect Plumbing: Connect the drain and overflow assembly to the existing plumbing. Ensure all connections are watertight. The bathtub features a left-hand drain.
- Secure the Bathtub: Secure the integrated tiling flange to the wall studs using appropriate fasteners.
- Water Test: Fill the bathtub with water and let it sit for a period to check for any leaks in the drain and overflow connections.
- Finishing: Install wall coverings (tiles, etc.) over the tiling flange. Apply a waterproof sealant (caulk) around the perimeter where the tub meets the wall.
Image 2.1: Detailed view of the bathtub's interior, highlighting the left-hand drain and textured floor for slip resistance.
3. Operation
The MAAX Exhibit Bathtub is designed for simple and comfortable use.
3.1 Filling the Bathtub
- Ensure the drain stopper is closed.
- Turn on the faucet to the desired water temperature and flow.
- Fill the bathtub to a comfortable level, ensuring not to exceed the overflow drain height.
3.2 Draining the Bathtub
- Open the drain stopper.
- Allow all water to drain completely.
- Rinse the bathtub interior with clean water after each use to prevent soap scum buildup.
Image 3.1: An angled perspective of the MAAX Exhibit Bathtub, illustrating its integrated skirt and the depth of the bathing area.
4. Care and Maintenance
Proper care will help maintain the appearance and longevity of your MAAX Exhibit Acrylic Bathtub.
4.1 Cleaning Instructions
- Regular Cleaning: Clean the bathtub regularly with a soft cloth or sponge and a non-abrasive, mild liquid household cleaner. Rinse thoroughly with clean water after cleaning.
- Avoid Abrasives: Do not use abrasive cleaners, scouring pads, steel wool, or harsh chemicals (e.g., acetone, paint thinner, strong acids or bases) as these can damage the acrylic surface.
- Stain Removal: For stubborn stains, use a mild acrylic-safe stain remover. Always test on an inconspicuous area first.
- Hard Water Spots: To prevent hard water spots, wipe the tub dry after each use. For existing spots, use a solution of white vinegar and water.
4.2 Preventing Damage
- Avoid dropping heavy or sharp objects into the tub, which can chip or scratch the acrylic.
- Do not use bath mats with suction cups, as they can trap dirt and cause discoloration or damage to the finish over time.
- Avoid exposing the acrylic surface to extreme heat sources.
5. Troubleshooting
This section addresses common issues you might encounter with your MAAX Exhibit Bathtub.
5.1 Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow Draining | Hair or soap buildup in the drain. | Remove the drain stopper and clear any obstructions. Use a plastic drain snake if necessary. Avoid harsh chemical drain cleaners. |
| Water Spots/Film | Hard water residue or soap scum. | Wipe the tub dry after each use. Clean with a solution of white vinegar and water or a mild, acrylic-safe cleaner. |
| Minor Scratches | Accidental abrasion. | For very minor surface scratches, a specialized acrylic repair kit or polishing compound may be used. Consult MAAX customer support for recommendations. |
| Leaks around Drain/Overflow | Improperly sealed connections. | This typically indicates an installation issue. Contact a qualified plumber to inspect and reseal connections. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact MAAX customer support or a qualified professional.
Image 5.1: The MAAX Exhibit Bathtub integrated into a bathroom with a shower enclosure, demonstrating its versatility.
6. Product Specifications
Detailed specifications for the MAAX Exhibit Acrylic Bathtub, Model 106221-L-000-001.
| Feature | Detail |
|---|---|
| Model Number | 106221-L-000-001 |
| Brand | MAAX |
| Style Name | Exhibit |
| Material | Acrylic |
| Color | White |
| Shape | Rectangular |
| Installation Type | Alcove |
| Drain Location | Left-hand |
| Product Dimensions (L x W x H) | 65.88"L x 32"W x 18"H (65.875-in L x 32-in W x 18-in H) |
| Item Weight | 155 pounds |
| Capacity | 76 gallons |
| Features | Integrated tiling flange, discreet armrests, textured floor, integrated skirt. |
| UPC / GTIN | 623163645002 |
7. Warranty Information
MAAX products are typically covered by a manufacturer's limited warranty. The specific terms and duration of the warranty for your Exhibit Acrylic Bathtub (Model 106221-L-000-001) may vary. Please refer to the warranty documentation included with your purchase or visit the official MAAX website for detailed information regarding warranty coverage, limitations, and how to make a claim.
Retain your proof of purchase for warranty purposes.
8. Customer Support
For technical assistance, installation questions, parts inquiries, or warranty claims, please contact MAAX customer support directly.
MAAX Official Website: www.maax.com
Contact information (phone numbers, email) can typically be found on the official MAAX website under their "Contact Us" or "Support" sections.