1. Important Safety Instructions
Please read all safety instructions carefully before operating the appliance. Keep this manual for future reference.
- Always ensure the appliance is placed on a stable, level surface.
- Do not block air inlets or outlets.
- Unplug the appliance before cleaning or performing any maintenance.
- Do not operate the appliance with a damaged power cord or plug.
- Keep out of reach of children. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities unless supervised.
- Do not use in bathrooms or other humid environments where water may splash onto the unit.
2. Product Overview
The Sharp UA-HD60E-L is an advanced air purifier and humidifier designed to improve indoor air quality. It features Plasmacluster ion technology, a multi-stage filtration system, and intelligent sensors.
Figure 2.1: Front view of the Sharp UA-HD60E-L Air Purifier.
Key Features:
- Plasmacluster Ion Technology: Reduces airborne bacteria, viruses, allergens, and mold, while also neutralizing odors and static electricity.
- 3-Level Filtration System: Includes a pre-filter, odor filter, and HEPA filter for comprehensive air purification.
- Humidification Function: Adds moisture to the air, which can improve skin hydration and alleviate dry air discomfort.
- Multiple Operating Modes: Auto, Advanced Auto, Max, Med, Low, and Pollen modes.
- Intelligent Sensors: Detects odor, dust, humidity, and temperature to automatically adjust operation.
- Ion Shower Mode: Provides a high density of Plasmacluster ions for rapid air purification.
- Timer Function and Child Lock: For convenient and safe operation.
Figure 2.2: Angled view of the Sharp UA-HD60E-L Air Purifier, showing the top control panel and side vents.
3. Setup
3.1 Unpacking
Carefully remove the air purifier from its packaging. Ensure all packing materials are removed from the unit, especially around the filters and air vents.
3.2 Filter Installation
The filters are typically pre-installed but may have protective plastic wrapping that needs to be removed before first use.
- Open the rear panel of the air purifier.
- Remove the pre-filter, odor filter, and HEPA filter.
- Remove any plastic packaging from each filter.
- Reinstall the filters in the correct order: Odor filter, then HEPA filter, followed by the pre-filter. Ensure they are securely seated.
- Close the rear panel.
Figure 3.1: Exploded view showing the multiple filter layers (pre-filter, odor filter, HEPA filter) and internal components.
Figure 3.2: Image showing the pre-filter being removed from the unit, illustrating its role in capturing dust and pet hair.
3.3 Water Tank Filling (for Humidification)
To use the humidification function, the water tank must be filled.
- Locate the water tank on the side of the unit.
- Pull out the water tank.
- Open the water tank cap and fill with clean tap water. Do not exceed the maximum fill line.
- Securely close the cap and reinsert the water tank into the unit.
Figure 3.3: Side view of the air purifier with the humidification water tank access panel open.
4. Operating Instructions
4.1 Control Panel Overview
The control panel is located on the top of the unit and features various buttons and indicators.
Figure 4.1: Top-down view of the control panel with various buttons and indicators.
4.2 Power On/Off
- To turn on the unit, press the POWER button.
- To turn off the unit, press the POWER button again.
4.3 Mode Selection
Press the MODE button to cycle through the available operating modes:
- Auto: The unit automatically adjusts fan speed and humidification based on sensor readings.
- Advanced Auto: An enhanced automatic mode for more precise control.
- Max: Operates at the highest fan speed for rapid purification.
- Med: Medium fan speed.
- Low: Low fan speed for quiet operation.
- Pollen: Optimized for pollen removal.
- Ion Shower: Releases a high concentration of Plasmacluster ions for 60 minutes to refresh the air.
Figure 4.2: Diagram illustrating the Plasmacluster ion technology, showing ions being released into the air.
4.4 Humidification Function
Press the HUMIDIFY button to activate or deactivate the humidification function. Ensure the water tank is filled.
4.5 Timer Function
Use the TIMER button to set the operating duration (e.g., 2, 4, 8 hours). The unit will automatically turn off after the set time.
4.6 Child Lock
To prevent accidental operation, activate the child lock by pressing and holding the CHILD LOCK button for a few seconds. Repeat to deactivate.
Figure 4.3: Diagram showing the intelligent operating mode with 6 sensors monitoring 7 factors (dust, odor, temperature, humidity, light, movement, PM2.5).
5. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your air purifier. Always unplug the unit before cleaning.
5.1 Pre-filter Cleaning
The pre-filter should be cleaned approximately once a month, or more frequently depending on usage and air quality.
- Remove the rear panel and then the pre-filter.
- Use a vacuum cleaner to remove dust and debris from the pre-filter.
- If heavily soiled, wash the pre-filter with water and a mild detergent. Rinse thoroughly and allow to air dry completely before reinstallation.
5.2 HEPA and Odor Filter Replacement
The HEPA and odor filters are not washable and must be replaced periodically (typically every 2-5 years, depending on usage). Refer to the filter indicator light on the control panel.
- Remove the rear panel and then the old HEPA and odor filters.
- Dispose of the old filters responsibly.
- Install new genuine Sharp replacement filters, ensuring correct orientation.
- Close the rear panel and reset the filter indicator (refer to control panel instructions).
Figure 5.1: Close-up of the HEPA filter, highlighting its structure and the types of particles it filters (dust, allergens, mold, microbes).
5.3 Humidification Filter and Water Tank Cleaning
The humidification filter and water tank should be cleaned regularly to prevent mold and bacteria growth.
- Remove the water tank and humidification filter.
- Wash the water tank with water and a mild detergent.
- Clean the humidification filter by soaking it in a descaling solution (e.g., citric acid solution) or a mild detergent, then rinse thoroughly.
- Allow all parts to air dry completely before reassembling.
5.4 General Cleaning
Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
6. Troubleshooting
If you encounter issues with your Sharp UA-HD60E-L, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | Power cord not properly connected; No power from outlet | Check power cord connection; Test outlet with another device |
| Weak airflow | Filters are clogged; Air inlets/outlets blocked | Clean or replace filters; Ensure clear path for airflow |
| Humidification not working | Water tank is empty; Humidification filter is dirty | Fill water tank; Clean humidification filter |
| Unusual noise | Foreign object inside; Unit not on a level surface | Unplug and check for obstructions; Place on a flat surface |
| Odor persists | Odor filter needs replacement; Source of odor still present | Replace odor filter; Identify and remove odor source |
7. Specifications
Detailed technical specifications for the Sharp UA-HD60E-L Air Purifier with Humidification Function.
| Specification | Value |
|---|---|
| Brand | Sharp |
| Model Number | UA-HD60E-L |
| Color | Light Grey |
| Product Dimensions (L x W x H) | 24.2 x 42 x 63.7 cm |
| Item Weight | 8.6 Kilograms |
| Water Tank Capacity | 1 Litre |
| Power | 3600 Watts (This value seems unusually high for an air purifier, please verify with product documentation if available.) |
| Voltage | 220 Volts |
| Energy Class | A+ to G |
| Noise Level | 25 Decibels |
| Filter Type | HEPA |
| Floor Area Coverage (without humidification) | Up to 48 m² |
| Floor Area Coverage (with humidification) | Up to 30 m² |
| Control Method | Touch |
| Compliance | TUV |
8. Warranty and Support
8.1 Warranty Information
This product comes with a 2-year availability of spare parts. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or contact Sharp customer support.
8.2 Customer Support
For technical assistance, troubleshooting not covered in this manual, or to order replacement parts, please contact Sharp customer support. Contact details can typically be found on the manufacturer's official website or on your product packaging.
Online Resources: Visit the official Sharp website for FAQs, product registration, and additional support materials.
