1. Introduction
This manual provides essential information for the safe and effective operation of your New Bright RC Tumble Bee. Please read all instructions carefully before use to ensure proper setup and to maximize your enjoyment of the product. This remote-controlled vehicle is designed for dynamic movement and interactive play.
2. Safety Information
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.
Observe the following safety guidelines to prevent injury or damage:
- Always operate the vehicle in open areas free from obstacles and hazards.
- Keep hands, hair, and loose clothing away from moving parts.
- Do not operate near people, pets, or fragile objects.
- Do not immerse the vehicle or remote control in water.
- Adult supervision is recommended for younger users.
- Batteries should be inserted with correct polarity. Do not mix old and new batteries, or different types of batteries.
- Remove batteries from the vehicle and remote when not in use for extended periods.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).
3. Package Contents
Verify that all items listed below are included in your package:
- 1 x RC Tumble Bee Vehicle
- 1 x Remote Control
- 1 x USB Charging Cable
Image: The New Bright RC Tumble Bee vehicle displayed within its retail packaging, showcasing the product and its accessories.
4. Setup
4.1. Battery Installation
The RC Tumble Bee requires 2 AA batteries for the remote control. The vehicle itself features an integrated rechargeable battery.
- Remote Control: Locate the battery compartment on the back of the remote control. Open the cover, insert 2 AA batteries, ensuring correct polarity (+/-). Close the cover securely.
4.2. Charging the Vehicle
The RC Tumble Bee vehicle is equipped with a USB rechargeable battery.
- Locate the USB charging port on the vehicle.
- Connect the provided USB charging cable to the vehicle's port.
- Plug the other end of the USB cable into a powered USB port (e.g., computer, USB wall adapter).
- The charging indicator light will illuminate during charging and turn off or change color when fully charged. Refer to the vehicle's specific indicator behavior for details.
- Charging typically takes approximately 60-90 minutes for a full charge.
5. Operating Instructions
5.1. Pairing the Remote Control
Before first use, the remote control and vehicle must be paired.
- Ensure the vehicle is fully charged and the remote has fresh batteries.
- Turn on the vehicle using its power switch.
- Turn on the remote control.
- The remote and vehicle should automatically pair. A light on the remote or vehicle may stop flashing to indicate a successful connection.
5.2. Basic Controls
The RC Tumble Bee is designed for unique movement and stunts.
- Forward/Backward: Use the joystick or directional buttons to move the vehicle forward or backward.
- Turning: Use the joystick or directional buttons to steer the vehicle left or right.
- Stunts: The Tumble Bee is capable of 360-degree spins and wild flips. Experiment with different control combinations to perform these actions. For example, pushing both joysticks in opposite directions might initiate a spin.
Image: The New Bright RC Tumble Bee vehicle, showcasing its distinctive design with large yellow wheels and a bee-like body, ready for operation.
6. Maintenance
Proper maintenance will extend the life of your RC Tumble Bee.
- Cleaning: Use a soft, dry cloth to wipe down the vehicle and remote control. Do not use water or chemical cleaners.
- Storage: Store the vehicle and remote in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the remote if storing for an extended period.
- Battery Care: Do not overcharge the vehicle's battery. Allow it to cool down after use before recharging.
7. Troubleshooting
If you encounter issues with your RC Tumble Bee, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not respond to remote. | Low vehicle battery, low remote battery, or pairing issue. | Charge vehicle battery. Replace remote batteries. Re-pair the remote and vehicle. |
| Vehicle moves slowly or erratically. | Low vehicle battery. | Recharge the vehicle battery. |
| Short operating range. | Interference, low remote battery. | Move to an area with less interference. Replace remote batteries. |
| Vehicle does not charge. | Faulty USB cable or power source. | Try a different USB cable or power source. Ensure connections are secure. |
8. Specifications
Detailed specifications for the New Bright RC Tumble Bee:
| Feature | Detail |
|---|---|
| Model Number | 3718U-Y |
| Brand | New Bright |
| Vehicle Power | Integrated Rechargeable Battery (USB Charge) |
| Remote Control Power | 2 AA Batteries (not included) |
| Item Weight | 1.5 pounds |
| Package Dimensions | 17.6 x 8.2 x 7.5 inches |
| Total Vehicle Dimensions | 11.5" Width, 7.5" Length, 5.0" Height |
Image: A diagram illustrating the total dimensions of the RC Tumble Bee vehicle, indicating its width, length, and height.
9. Warranty and Support
New Bright products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official New Bright website. For technical support or replacement parts, please contact New Bright customer service directly.
You can find more information and support resources by visiting the New Bright Store on Amazon.
