Maax Rubix Soaking Bathtub

1. Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your Maax Rubix Soaking Bathtub, model 105815-L-000-001. Please read all instructions carefully before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.

2. Safety Information

• Professional Installation Recommended: Installation of this bathtub requires plumbing and construction knowledge. It is highly recommended that a qualified professional perform the installation to ensure compliance with local codes and proper function.
• Hot Water Safety: Always test water temperature before entering the bathtub to prevent scalding. Adjust water heater settings to a safe temperature.
• Slip Hazard: The bathtub surface can be slippery when wet. Use caution when entering and exiting. Consider installing grab bars for added safety.
• Weight Capacity: Do not exceed the recommended weight capacity of the bathtub.
• Chemicals: Avoid using harsh chemicals or abrasive cleaners that can damage the acrylic surface. Refer to the maintenance section for cleaning guidelines.
• Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

3. Package Contents

Verify that all components are present and undamaged before proceeding with installation.

• Maax Rubix Soaking Bathtub (Model: 105815-L-000-001)
• Integrated Tiling Flange
• Integrated Skirt
• Left Hand Drain Assembly (pre-installed or included separately)

4. Setup and Installation

The Maax Rubix bathtub is designed for alcove installation with a left-hand drain. It features an integrated tiling flange and skirt for simplified installation and a finished look.

1. Preparation: Ensure the installation area is level, structurally sound, and properly prepared for plumbing connections. Verify rough-in dimensions match the bathtub specifications.
2. Positioning: Carefully position the bathtub into the alcove. The integrated tiling flange should align with the wall studs, and the skirt should be flush with the floor.
3. Drain Connection: Connect the left-hand drain assembly to your home's drainage system. Ensure all connections are watertight.
4. Water Supply: Connect the hot and cold water supply lines to the faucet (faucet not included).
5. Securing the Bathtub: Secure the bathtub to the wall studs through the integrated tiling flange using appropriate fasteners.
6. Sealing: Apply a waterproof sealant (e.g., silicone caulk) around the perimeter of the bathtub where it meets the walls and floor to prevent water penetration.
7. Above-the-Floor Rough (AFR) Option: If your model includes the AFR option, follow specific instructions provided with that kit for easier drain connection in certain installations.

This image displays the Maax Rubix soaking bathtub, model 105815-L-000-001, installed within an alcove setting in a contemporary bathroom. The bathtub features a clean white finish and a visible left-hand drain, integrated with a tiling flange and skirt for a seamless installation.

An overhead perspective of the Maax Rubix soaking bathtub, model 105815-L-000-001, showcasing its spacious rectangular interior and the precise placement of the left-hand drain. This view emphasizes the cubic design and smooth acrylic surface.

5. Operating Instructions

1. Filling the Bathtub: Close the drain stopper. Turn on the faucet and adjust the water temperature to your preference. Fill the bathtub to the desired level, ensuring not to exceed the overflow drain.
2. Draining the Bathtub: Open the drain stopper to allow water to flow out. Ensure the drain is clear of obstructions for efficient draining.
3. General Use: The Maax Rubix bathtub is designed for soaking. Avoid standing on the edges or applying excessive force to the bathtub walls.

6. Maintenance

Proper care will help maintain the appearance and extend the life of your acrylic bathtub.

• Regular Cleaning: Clean the bathtub regularly with a soft cloth or sponge and a non-abrasive, mild liquid cleaner specifically designed for acrylic surfaces.
• Avoid Abrasives: Do not use abrasive cleaners, scouring pads, wire brushes, or harsh chemicals (e.g., acetone, paint thinner, strong acids or bases) as these can scratch or damage the acrylic finish.
• Stain Removal: For stubborn stains, use a diluted solution of white vinegar and water, or a specialized acrylic cleaner. Rinse thoroughly after cleaning.
• Preventing Scratches: Avoid dropping sharp or heavy objects into the tub. Do not use the tub as a work surface.
• Drain Maintenance: Periodically remove and clean the drain stopper to prevent buildup and ensure proper drainage.

7. Troubleshooting

• Slow Drainage: Check the drain stopper for hair or debris. If the issue persists, the plumbing trap may be clogged. Consult a plumber.
• Minor Leaks: Inspect all plumbing connections for tightness. If a leak is detected at the drain assembly, ensure all seals are properly seated. For persistent leaks, contact a qualified plumber.
• Surface Scratches: Minor scratches on acrylic can sometimes be buffed out with a fine-grit polishing compound designed for acrylic. For deeper scratches, professional repair may be necessary.

8. Specifications

9. Warranty and Support

Maax products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Maax website. For technical assistance, replacement parts, or any other inquiries, please contact Maax customer support through their official channels.

Maax Official Website: www.maax.com