Product Overview
This manual provides instructions for the installation, operation, maintenance, and troubleshooting of your MAAX Exhibit Acrylic End Drain Bathtub, model 106181-000-001. This rectangular bathtub is designed for drop-in or alcove installations and features an end drain location, a tiling flange, discreet armrests, and a textured floor for a minimalist aesthetic and enhanced safety.
Image: The MAAX Exhibit Acrylic Bathtub, model 106181-000-001, shown installed in a contemporary bathroom setting. The bathtub is white and rectangular, positioned beneath a wide window, complementing the room's clean design.
Setup and Installation
The MAAX Exhibit bathtub is designed for either drop-in or alcove installation. Proper installation is crucial for the bathtub's performance and longevity. It is highly recommended that installation be performed by a qualified professional to ensure compliance with local plumbing and building codes.
Pre-Installation Checklist:
- Verify all dimensions and ensure the rough-in opening is correctly sized for the 71.875-inch L x 36-inch W x 18-inch H bathtub.
- Inspect the bathtub for any damage prior to installation.
- Ensure the subfloor is level, structurally sound, and capable of supporting the weight of the bathtub when filled with water, plus the user.
- Confirm access to plumbing for drain and faucet connections.
General Installation Steps (Alcove/Drop-in):
- Prepare the Area: Clear the installation site. Ensure the framing for the alcove or drop-in deck is accurate and sturdy.
- Leveling: Place the bathtub into the prepared opening. Use shims as necessary to ensure the tub is perfectly level.
- Drain Connection: Connect the bathtub drain to the household plumbing system. Ensure all connections are watertight. The end drain location provides flexibility for plumbing configurations.
- Faucet Installation: Install the faucet and spout according to the manufacturer's instructions.
- Secure the Bathtub: For alcove installations, secure the tiling flange to the wall studs. For drop-in installations, secure the tub rim to the deck framing using appropriate fasteners.
- Sealing: Apply a waterproof sealant (e.g., silicone caulk) around the perimeter of the bathtub where it meets the wall or deck to prevent water penetration.
- Water Test: Fill the bathtub with water and check for any leaks around the drain and overflow.
Image: A top-down view of the MAAX Exhibit Acrylic Bathtub, highlighting its rectangular shape, end drain placement, and the subtle textured pattern on the floor for slip resistance.
Operating Instructions
Using your MAAX Exhibit bathtub is straightforward. Follow these guidelines for safe and enjoyable use:
- Filling the Bathtub: Ensure the drain stopper is closed. Turn on the faucet to fill the tub with water to your desired level. Always test the water temperature before entering to prevent scalding.
- Draining the Bathtub: After use, open the drain stopper to allow the water to empty.
- Safety Precautions:
- Do not leave children unattended in or near the bathtub.
- Avoid using electrical appliances near the bathtub.
- Be cautious when entering and exiting the tub, especially when wet. The textured floor provides some slip resistance, but care should always be taken.
- Do not overfill the bathtub.
Maintenance and Care
To maintain the pristine appearance and extend the life of your MAAX Exhibit Acrylic Bathtub, follow these cleaning and care recommendations:
- Regular Cleaning: Clean the bathtub regularly with a soft cloth or sponge and a non-abrasive, mild liquid cleaner specifically designed for acrylic surfaces.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, scouring pads, steel wool, or harsh chemical cleaners (e.g., acetone, paint thinner, strong acids or bases) as these can damage the acrylic surface and finish.
- Stain Removal: For stubborn stains, use a diluted solution of white vinegar and water, or a specialized acrylic cleaner. Rinse thoroughly after cleaning.
- Prevent Scratches: Avoid dropping sharp or heavy objects into the tub. Do not use the tub as a work surface.
- Drain Care: Periodically clean the drain to prevent clogs. Avoid pouring grease or harsh chemicals down the drain.
Image: The MAAX Exhibit Acrylic Bathtub featuring its smooth white acrylic surface. A wooden bath caddy with decorative stones and a seashell rests across the tub, demonstrating its functional design.
Troubleshooting
This section addresses common issues you might encounter with your bathtub. For problems not listed here, or if solutions do not resolve the issue, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow Draining | Hair or debris in the drain; partially clogged plumbing. | Remove the drain stopper and clear any visible obstructions. Use a drain snake or a non-corrosive drain cleaner. If the problem persists, consult a plumber. |
| Leaks around Drain/Overflow | Loose connections; worn gaskets or sealant. | Tighten drain and overflow connections. Inspect and replace any worn gaskets. Reapply silicone sealant if necessary. Professional assistance may be required. |
| Surface Scratches/Dullness | Abrasive cleaning; impact from objects. | Use only non-abrasive cleaners and soft cloths. Minor scratches on acrylic can sometimes be buffed out with a specialized acrylic repair kit. For significant damage, professional repair or replacement may be needed. |
| Water Temperature Issues | Water heater settings; plumbing issues. | Check your water heater settings. If other fixtures have normal hot water, the issue may be specific to the bathtub's faucet or plumbing. Consult a plumber. |
Specifications
Detailed specifications for the MAAX Exhibit Acrylic Bathtub, model 106181-000-001:
- Model Number: 106181-000-001
- Brand: MAAX
- Material: Acrylic
- Color: White
- Product Dimensions (L x W x H): 71.875 inches x 36 inches x 18 inches (71.88"L x 36"W x 18"H)
- Shape: Rectangular
- Installation Type: Alcove, Drop-In
- Drain Location: End
- Capacity: 76 Gallons
- Item Weight: 155 Pounds
- Features: Tiling flange, discreet armrests, textured floor
- UPC: 623163645361
Warranty Information
Warranty details for the MAAX Exhibit Acrylic Bathtub are typically provided at the time of purchase or can be obtained directly from the manufacturer. Please refer to the documentation included with your product or visit the official MAAX website for the most current and comprehensive warranty policy.
Customer Support
For technical assistance, replacement parts, or further inquiries regarding your MAAX Exhibit Acrylic Bathtub, please contact MAAX customer service. Contact information can usually be found on the manufacturer's official website or on your purchase receipt.
When contacting support, please have your model number (106181-000-001) and date of purchase readily available.