JOYIN Robot T-Rex Dinosaur Toy Instruction Manual

Introduction

This manual provides essential information for the safe and effective use of your JOYIN Robot T-Rex Dinosaur Toy. Please read these instructions thoroughly before assembly and operation to ensure proper function and longevity of the product.

Safety Information

• Recommended for ages 36 months to 11 years. Adult supervision is advised.
• The toy is made with durable, non-toxic, BPA-free vinyl and conforms to US TOY Safety Standards ASTM F963.
• Keep batteries out of reach of small children. Do not mix old and new batteries, or different types of batteries.
• Do not immerse the dinosaur or remote control in water, except for the designated water-filling port for the steam function.
• Avoid pointing the steam or lights directly at eyes.

Package Contents

• 1x JOYIN Robot T-Rex Dinosaur
• 1x Remote Control
• 1x Water Dropper (for steam function)
• 1x Instruction Manual
• Note: 3 AA batteries for the dinosaur and 2 AA batteries for the remote control are NOT included.

Setup

1. Battery Installation (Dinosaur)

Locate the battery compartment on the underside of the dinosaur. Use a screwdriver to open the compartment. Insert 3 AA batteries, ensuring correct polarity. Close the compartment securely.

Image: Underside of the dinosaur showing the battery compartment. The image also displays product dimensions.

2. Battery Installation (Remote Control)

Locate the battery compartment on the remote control. Use a screwdriver to open it. Insert 2 AA batteries, ensuring correct polarity. Close the compartment securely.

Image: The remote control for the dinosaur toy, featuring buttons for different actions.

3. Assembly

The dinosaur's legs, arms, and tail may require attachment upon unboxing. Gently snap these parts into their designated slots until they are secure. The toy is designed for easy assembly.

Image: The complete dinosaur toy and its remote control, ready for play.

4. Water Filling (Steam Function)

To activate the electronic steam function, locate the water-filling port on the dinosaur's head/back. Use the provided water dropper to carefully fill the reservoir with clean water. Do not overfill.

Image: The dinosaur's head and back, showing the LED lights and the area for the steam function.

Operating Instructions

1. Power On/Off

Turn the dinosaur ON using the switch located on its belly/tail area. Turn the remote control ON using its power switch.

2. Remote Control Functions

The remote control allows you to command the dinosaur's movements and activate its features:

• Forward/Backward: Use the directional buttons to make the dinosaur walk forward or backward.
• Turn Left/Right: Combine directional buttons to steer the dinosaur.
• Dance: Press the 'Dance' button to activate a pre-programmed dancing sequence.
• Roar: Press the 'Roar' button for realistic roaring sounds.
• V/S (Steam/Lights): Press this button to activate the electronic steam and LED light effects. The LED lights illuminate the clear spikes down the back and flash in the eyes and tongue.
• Stop: Press the 'Stop' button to halt all current actions.

Image: The remote control with clearly labeled buttons for various dinosaur actions.

3. Movement and Sound Features

The dinosaur features realistic walking movements, head shaking, and roaring sounds. Its eyes, tongue, and back spikes light up with vibrant LED colors (red, blue, and green) to enhance the experience.

Maintenance

• Cleaning: Wipe the dinosaur and remote control with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• Battery Care: Remove batteries from both the dinosaur and remote control if the toy will not be used for an extended period to prevent leakage.
• Storage: Store the toy in a cool, dry place away from direct sunlight.

Troubleshooting

• Dinosaur not responding to remote: Ensure both the dinosaur and remote control are powered on and have fresh batteries. Check that the dinosaur's power switch (often near the tail) is in the 'ON' position.
• Dinosaur parts (legs, arms, tail) detach: These parts are designed to be reattached by gently snapping them back into place. This is a common occurrence during play and is not a defect.
• Steam function not working: Ensure the water reservoir is filled with water using the provided dropper.
• Sound is too loud: The sound volume is not adjustable on this model.

Specifications

Warranty and Support

For any questions, concerns, or support regarding your JOYIN Robot T-Rex Dinosaur Toy, please contact the manufacturer directly. Refer to the product packaging or the official JOYIN website for contact information.