Ryobi 20 in. 40-Volt Brushless Cordless Electric Snow Blower

Important Safety Information

Always prioritize safety when operating power equipment. Failure to follow these guidelines may result in serious injury.

• Wear Protective Equipment: Always wear appropriate personal protective equipment, including safety glasses, hearing protection, and sturdy footwear.
• Awareness of Moving Parts: Keep hands, feet, and clothing away from all moving parts, especially the auger and discharge chute, during operation and when the unit is powered on.
• Proper Ventilation: While this is an electric unit, ensure adequate ventilation if operating in an enclosed space for battery charging or storage.
• Follow Manufacturer Guidelines: Adhere strictly to all instructions provided in this manual and any additional documentation from RYOBI for safe use, assembly, and storage.
• Inspect Before Use: Before each use, inspect the snow blower for any loose parts, damage, or obstructions. Ensure all guards and safety devices are in place and functioning correctly.
• Clear Area: Before starting, clear the area of any objects that could be thrown by the snow blower, such as rocks, toys, or debris.

Product Overview

The RYOBI 40-Volt 20-inch Cordless Electric Snow Blower (Model RY40850) is designed for efficient snow removal from patios, decks, and driveways. It features a powerful brushless motor for consistent, quiet operation, capable of discharging snow up to 25 feet. Key features include a push-button start, twin LED headlights for visibility, and a 180-degree directional chute for precise snow-throwing control. This unit comes equipped with one 40-Volt 5.0 Ah High Capacity Lithium-Ion battery and charger for extended runtime.

Setup Instructions

Follow these steps to assemble and prepare your snow blower for first use.

1. Unpacking: Carefully remove all components from the packaging. Ensure all parts listed in the manual are present.
2. Handle Assembly: Unfold the handle into the operating position. Secure any locking mechanisms as instructed in the detailed manual.
3. Chute Assembly: Attach the discharge chute and deflector according to the assembly diagrams. Ensure all connections are secure. Important Note: The chute's directional rod must be disconnected from the snow blower body and removed from the handle cross brace before folding the handle for storage. Failure to do so can damage the internal chute pivoting mechanism.
4. Battery Charging: Insert the 40-Volt 5.0 Ah Lithium-Ion battery into the included charger. Connect the charger to a standard power outlet. Allow the battery to fully charge before first use. Refer to the charger's indicator lights for charging status.
5. Battery Installation: Once fully charged, insert the battery into the battery compartment on the snow blower. Ensure it clicks securely into place.

Operating Instructions

Before operating, ensure you have read and understood all safety warnings.

1. Pre-Operation Check: Verify the battery is fully charged and securely installed. Ensure the discharge chute is clear of obstructions and pointed in a safe direction. Check for any loose fasteners or damaged parts.
2. Starting the Snow Blower:
   • Engage the safety switch (if applicable).
   • Press and hold the push-button start.
   • Squeeze the bail switch/handle to engage the auger. The snow blower will start.
3. Operating the Unit:
   • Push the snow blower forward at a comfortable pace. Avoid forcing the unit through heavy snow.
   • Adjust the 180-degree directional chute as needed to control the snow discharge direction.
   • Utilize the twin LED headlights for improved visibility during low-light conditions.
   • For optimal performance and battery life, clear snow in manageable passes. The 5.0 Ah battery provides extended runtime, but very heavy or wet snow may reduce it.
4. Stopping the Snow Blower: Release the bail switch/handle to disengage the auger and stop the motor.
5. Post-Operation: Remove the battery from the snow blower after each use. Store the battery and snow blower in a dry, protected area.

Maintenance

Regular maintenance ensures optimal performance and extends the life of your snow blower.

• Battery Care:
  • Always store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
  • Charge batteries fully before long-term storage and periodically during storage to maintain charge.
  • Do not store batteries in a discharged state.
• Cleaning: After each use, disconnect the battery and use a brush or cloth to remove any snow, ice, or debris from the auger, chute, and exterior surfaces. Do not use water to clean the electrical components.
• Chute Maintenance: To prevent clogging, especially in wet snow conditions, consider applying a non-stick spray (e.g., silicone spray or WD40) to the inside of the discharge chute before use. Always ensure the battery is removed before performing any maintenance on the chute.
• Storage: When not in use, store the snow blower in a dry, protected area. Ensure the handle is folded correctly (refer to setup instructions regarding the chute rod) to prevent damage.
• Inspection: Periodically inspect the auger blades for wear or damage. Replace worn parts as necessary. Check all fasteners for tightness.

Troubleshooting

Refer to this section for solutions to common issues. If problems persist, contact RYOBI customer support.

Specifications

Warranty and Support

For warranty information, product registration, or technical support, please refer to the documentation included with your purchase or visit the official RYOBI website. Keep your proof of purchase for warranty claims.

RYOBI Official Website: www.ryobitools.com