AVS Aeroskin Hood Lightshield/Protector Instruction Manual

1. Introduction

The AVS Aeroskin Hood Lightshield/Protector is designed to provide protection for your vehicle's hood while enhancing its appearance with an integrated amber LED lightbar. This guide provides essential information for proper installation, operation, and maintenance of your new hood protector.

2. Product Features

• Fitment: Specifically designed for 2015 - 2020 Ford F-150 models (Excludes Raptor).
• Integrated LED Lightbar: Features a fully integrated amber LED lightbar that emits 250 lumens, providing a distinctive look and enhanced visibility.
• Customized Fit: Engineered to mount flush to the contours of your hood and custom-molded to fit the exact year, make, and model of your vehicle.
• Durable Construction: Made from Dura-Flex 2000 TPO material, offering robust protection against impacts and flexibility for a perfect fit.
• Easy Installation: No drilling or special hardware is required. The protector mounts in minutes using the included 3M automotive-grade adhesive.

3. What's in the Box

Upon unpacking, please ensure all the following components are present:

• Hood Protector
• Wiring Harness for LED Lightbar
• Installation Instructions

4. Specifications

5. Setup (Installation)

The AVS Aeroskin Hood Lightshield/Protector is designed for a straightforward installation process without the need for drilling. It utilizes 3M automotive-grade adhesive for secure attachment.

General Installation Steps:

1. Prepare the Surface: Thoroughly clean the hood surface where the protector will be installed. Ensure it is free of dirt, wax, and grease. Use an alcohol wipe for best results and allow it to dry completely.
2. Test Fit: Before removing the adhesive backing, carefully position the hood protector on your vehicle's hood to ensure proper alignment and fit. Mark the position with painter's tape if necessary.
3. Apply Adhesive: Peel back a small portion of the 3M adhesive liner from the ends of the protector. Align the protector with your markings and press down firmly, working from the center outwards. Gradually remove the remaining adhesive liner while applying pressure.
4. Secure Attachment: Once the protector is fully adhered, apply firm and even pressure across the entire surface to ensure a strong bond. Avoid washing the vehicle for at least 24-48 hours to allow the adhesive to cure.
5. Wiring the LED Lightbar: Connect the included wiring harness for the LED lightbar to your vehicle's existing parking light circuit. This typically involves tapping into the parking light wires. Refer to the detailed wiring diagram in the included 'Instructions' manual for specific connections. Professional installation is recommended for electrical components if you are unsure.

Installation Video:

6. Operating the LED Lightbar

The integrated amber LED lightbar is designed to illuminate automatically when connected to your vehicle's existing parking lights. This provides additional forward visibility and a distinctive aesthetic. Ensure proper wiring connections are made during the installation process for optimal functionality.

7. Maintenance

To ensure the longevity and appearance of your AVS Aeroskin Hood Lightshield/Protector, follow these maintenance guidelines:

• Cleaning: Regularly clean the hood protector with mild automotive soap and water. Use a soft cloth or sponge.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the textured finish and the LED components.
• Inspect Adhesive: Periodically check the adhesive bond along the edges of the protector to ensure it remains securely attached to the hood. Reapply pressure if any areas appear loose.
• LED Inspection: Occasionally check the LED lightbar for proper illumination. If any LEDs are not working, refer to the troubleshooting section.

8. Troubleshooting

If you encounter any issues with your AVS Aeroskin Hood Lightshield/Protector, refer to the following common troubleshooting steps:

• LED Lightbar Not Illuminating:
  • Check all wiring connections to ensure they are secure and correctly connected to the vehicle's parking light circuit.
  • Verify that your vehicle's parking lights are turned on and functioning correctly.
  • Inspect the wiring for any signs of damage or corrosion.
• Hood Protector Becoming Loose:
  • Ensure the installation surface was properly cleaned and dried before initial application.
  • Apply firm, even pressure to the entire length of the protector to re-secure any loose areas.
  • If the adhesive bond is compromised, contact customer support for guidance on re-application or replacement adhesive.

If issues persist after attempting these steps, professional assistance may be required.

9. Warranty and Support

For detailed warranty information, product registration, or technical support, please refer to the documentation included with your AVS Aeroskin Hood Lightshield/Protector. You may also visit the official Auto Ventshade website for further assistance and contact information.