SAMSUNG MWR-SH10N AC Wired Touch Remote Controller Thermostat User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Samsung MWR-SH10N AC Wired Touch Remote Controller Thermostat. This device is designed to provide precise control over Samsung Central Air conditioning systems, including DVM S and Ducted split units (NASA).

The MWR-SH10N model is compatible with and can replace older models such as MWR-WE10N, MWR-WE13N, MWR-WE11N, MWR-SH00N, and MWR-SH11N.

2. Safety Information

Please read all safety warnings and instructions carefully before installing or operating this device. Failure to comply may result in electric shock, fire, or serious injury.

• Installation must be performed by qualified personnel in accordance with all local and national electrical codes.
• Disconnect power to the air conditioning system before performing any wiring or maintenance.
• Do not expose the device to water or excessive humidity.
• Do not attempt to repair or modify the device yourself. Contact qualified service personnel.

3. Product Overview

The Samsung MWR-SH10N is a wired touch screen remote controller designed for seamless integration with Samsung AC systems. It features a sleek design and intuitive touch interface for easy temperature and mode adjustments.

Figure 3.1: Front view of the MWR-SH10N thermostat with its screen off, showing the clean white bezel and the Samsung logo at the bottom.

Figure 3.2: Front view of the MWR-SH10N thermostat with its touch screen active, displaying temperature settings, mode, fan, timer, sleep, and swing controls.

Figure 3.3: Rear view of the MWR-SH10N thermostat, showing the mounting plate with screw holes and connection points for wiring.

3.1 Key Features

• Touch Screen Interface
• Wired Connectivity (2 wires: F1/F2)
• Compatibility with Samsung DVM S and Ducted split units
• Sleek, modern design

4. Installation

4.1 Pre-installation Checklist

• Ensure power to the AC unit is disconnected.
• Verify compatibility with your Samsung AC system.
• Gather necessary tools: screwdriver, wire strippers, mounting screws.

4.2 Mounting the Thermostat

1. Select a suitable location on an interior wall, away from direct sunlight, drafts, or heat sources.
2. Carefully detach the mounting plate from the main thermostat unit.
3. Secure the mounting plate to the wall using appropriate screws. Ensure it is level.

4.3 Wiring Connections

The MWR-SH10N connects using two wires (F1/F2). Refer to your AC unit's wiring diagram for specific connection points.

1. Route the F1 and F2 communication wires from the AC unit to the thermostat mounting location.
2. Connect the F1 wire to the F1 terminal and the F2 wire to the F2 terminal on the thermostat's wiring block. Ensure connections are secure.
3. Once wiring is complete, carefully attach the thermostat unit to the mounted plate, ensuring it clicks into place.

Note: Incorrect wiring can damage the thermostat or the AC system. If unsure, consult a professional HVAC technician.

5. Operating Instructions

The MWR-SH10N features an intuitive touch screen for easy control.

5.1 Powering On/Off

Touch the Power icon (typically a circle with a vertical line) to turn the AC system on or off.

5.2 Adjusting Temperature

Use the + and - buttons on the screen to increase or decrease the desired temperature setting.

5.3 Changing Operating Mode

Touch the Mode icon to cycle through available operating modes such as Cool, Heat, Fan, Dry, or Auto, depending on your AC system's capabilities.

5.4 Fan Speed Control

Press the Fan icon to adjust the fan speed (e.g., Low, Medium, High, Auto).

5.5 Timer Function

The Timer function allows you to set specific times for the AC unit to turn on or off. Follow the on-screen prompts to configure timer settings.

5.6 Sleep Mode

Activate Sleep mode for optimized comfort and energy saving during sleep hours. This mode typically adjusts temperature gradually.

5.7 Swing Function

The Swing function controls the louver movement for even air distribution. Touch the icon to toggle or adjust swing settings.

5.8 Child Lock

To prevent unintended changes, some models feature a child lock. Typically, this is activated by pressing and holding a specific icon (e.g., a lock symbol) for 3 seconds.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your thermostat.

6.1 Cleaning the Screen

Use a soft, dry, lint-free cloth to gently wipe the touch screen. Do not use abrasive cleaners, solvents, or spray cleaners directly onto the screen.

6.2 General Care

• Keep the thermostat free from dust and debris.
• Ensure no objects obstruct the thermostat's sensors (if applicable).
• Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.

7. Troubleshooting

If the problem persists after attempting these solutions, please contact Samsung customer support or a qualified service technician.

8. Specifications

• Model: MWR-SH10N
• Manufacturer: Samsung
• Connectivity: Wired (F1/F2)
• Interface: Touch Screen
• Color: White
• Product Dimensions: 23.6 x 16.2 x 8.3 cm
• Item Weight: 770 g
• Compatible Devices: Samsung DVM S and Ducted split units (NASA)
• Replaceable Models: MWR-WE10N, MWR-WE13N, MWR-WE11N, MWR-SH00N, MWR-SH11N

9. Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official Samsung website.

For technical support, service requests, or further assistance, please contact Samsung customer service.

Samsung Customer Service:

• Visit Samsung Support Website
• Visit the Samsung Store on Amazon.ae